I think) move the backboard. Replacement part available?
Lifetime

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

Simply place a level on the sides of the pole to check it for levelness. You can loosen the top nuts slightly and adjust the bottom nuts to move the system up or down on the corner which needs leveling. When the system is level, simply tighten all nuts against the pole system.
The adjustment cylinder has a loop at the bottom that receives a removable crank handle. Insert the hooked end of the crank handle into the adjustment loop. Then turn crank handle clockwise to raise rim height, counterclockwise to lower.
Our EZ-Crank adjustment means players of any age, size or ability can change the rim height. To adjust, simply turn the crank handle. The Titan Basketball Goal is infinitely adjustable from 10` down to 5`6″.
One-piece pole – The Goaliath utilizes a two piece pole system vs. the Goalrilla one piece pole system. A two piece pole system does not allow for dunking or aggressive play. Over time the two piece pole will start to lean and cannot be fixed.
All Goalrilla basketball goals come with a breakaway rim standard so you don`t have to worry about whether or not you can dunk on your goal.
Can I turn my portable system into an in-ground system? In order to convert your Lifetime portable system, you will need to purchase a new set of in-ground poles. Please contact customer service for parts and service.
If the backboard is not installed level with the ground, then it will cause the hoop to lean to one side. The best way to fix this problem is to uninstall the backboard and reinstall it correctly.
Basketball Backboards Rims

Lifetime basketball backboards are interchangeable on some Lifetime basketball hoops, but due to the wide variety of systems on the market, we suggest you call our customer service to verify compatibility.

WATER. Adding water to the base is as simple as hooking a hose to the base hole. This is a cheaper and easier option than sand. If you plan on moving the hoop around a lot, water is a good choice since you can easily empty it from the base.
As long as you have a hoop that is at least as wide as the diameter of the ball, two balls can fit through at once. The standard size of a basketball hoop is 10 feet in height and 24 inches in diameter. Even if you throw the ball off-balance, you`re bound to dunk like Jordan.
The one-piece steel pole provides un-compromised strength with welded gussets, maximise stability and eliminate pole flex at base. With a superior strength backboard, with welded wide span steel arms providing high level support. Made with tempered glass, for maximum rebound support. Approved for dunking!
The following season after the ABA and NBA merger, the NBA held its own dunk contest, won by former ABA player Darnell “Dr Dunk” Hillman. The NBA brought it back in 1984 (again in Denver, won by Larry Nance). It`s been going ever since, featuring winners such as Jordan, Wilkins, Kobe Bryant, Carter and Webb.
It is made of a flat, rigid piece of, often Plexiglas or tempered glass which also has the properties of safety glass when accidentally shattered. It is usually rectangular as used in NBA, NCAA and international basketball.
Lifetime portable basketball bases are designed to be filled with either sand or water, and each one has pros and cons. Sand is about 45% denser than water, which increases the system`s stability making it more difficult to tip the system.
Keep it clean.

Instead, use milder cleansers like you would use on your automobile. For glass backboards, a glass cleaner of white vinegar and water is a great choice. However, for acrylic, go for something even milder, like Dawn dishwashing liquid.

A backboard shattering (also known as backboard breaking or backboard smash) is an accident or stunt in basketball. It occurs when a player performs a slam dunk with sufficient force to shatter the tempered glass of the backboard, often causing the hoop to break off as well.
Backboard shattering is something that happens when a player slam dunks the ball hard enough to break the tempered safety glass of the backboard. You may be surprised to find out however that the first person to shatter a backboard in National Basketball Association history did not do so by dunking the ball.
Acrylic basketball backboards tend to be even more shatter resistant than glass. The thickness of the acrylic can greatly affect its performance and price. Thinner acrylic can momentarily give under the pressure of the basketball, which can change the angle of the rebound.
Slapping the backboard is neither basket interference nor goaltending. A technical may be assessed when a player strikes the backboard so forcefully it cannot be ignored, but simply slapping the backboard in an attempt to block a shot is neither a violation nor a technical foul.
Caulking is the most common way to repair a basketball hoop base leak, but it`s not always effective. Epoxy resin can be used to fix larger holes in the basketball hoop base, but it needs to be properly applied and cured for maximum effectiveness.
The adjustment cylinder has a loop at the bottom that receives a removable crank handle. Insert the hooked end of the crank handle into the adjustment loop. Then turn crank handle clockwise to raise rim height, counterclockwise to lower.
Our EZ-Crank adjustment means players of any age, size or ability can change the rim height. To adjust, simply turn the crank handle. The Titan Basketball Goal is infinitely adjustable from 10` down to 5`6″.
Simply place a level on the sides of the pole to check it for levelness. You can loosen the top nuts slightly and adjust the bottom nuts to move the system up or down on the corner which needs leveling. When the system is level, simply tighten all nuts against the pole system.
Throughout gyms, parks, and driveways around the world, basketball hoops are almost always 10 feet (3 meters) off the ground. Some leagues for young children play on shorter hoops, but from junior high schools through the professional leagues, the game is played on hoops of the standard 10-foot height.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Ok, so last week one of my airsoft guns, the Crosman Stinger R39, and part of the cocking mechanism broke to where it can not be pulled back, and the Airsoft pellet cannot be loaded into the chamber. so I took it apart, to get the other half of the cocking mechanism. I then proceeded to fix it (with gorilla apoxy) and let it dry until today. a little while ago, I put it back together, tried to **** it back, and – SNAP – it broke….. again. is there a place to buy replacement parts replacement parts for it?
ANSWER : My cocking bolt broke too and now i cant find a replacement for it 🙁

Read Full Q/A … : Lifetime

Hello, i think i figured out what it was, after breaking down the valve again i was looking at the rubber that is around the valves and i was thinking at first this wasnt an extra part, but come to find out after many hours of researching online it is an peice that comes off but its just glued on, its a (Spider) gasket. So do u think if nothing is wrong with the valve itself that if the spider gasket is wearing away and starting to get britle that it will let the debris i vacuum up come back in the pool and let the backwash valve leak when its on the filter position? I cant thank u enough for helping me. You sure have lead me in the right direction and saved me alot of money. Otherwise i would of probably gave up and bought another one….thanks and let me know if u think that the buying a spider gasket will solve my problems
ANSWER : The spider gasket that you refer to is what seals the chambers from each other. Leaking here can have a large impact on how well the valve is able to do its job. But, I don’t remember seeing one in the parts diagram. If you are able to obtain one, then by all means, replace it if you can. As I said earlier, you are essentially rebuilding the valve assembly. If something looks worn, now is the time to repair / replace it during reassembly. I also have a suggestion for you as well. Take good pictures, document everything that you do when you disassemble and reassemble the valve. Then write up a tip (gotta become an expert) for others to read through and be able to service their own equipment. I was surprised to see that there were as many other questions asked about the same filter that you have. Highly recommend that you do this. As many times as you have taken this apart and put it back together, you are fast becoming an authority on it!Glad to see that you are sticking it through, and not throwing in the towel. After all is said and done, you will have a working knowledge of how your filter works, and be able to identify issues in the future before they become a problem. Congratulations!

Read Full Q/A … : Lifetime

Missing left side saftey and attachment screw
ANSWER : Try Numrich gun parts america. They have parts for virtually any firearm you can find. Type in Numrich into the web. Allan 393

Read Full Q/A … : Lifetime

How do I order a replacement part for a sportcraft foosball table? I cannot find a contact number for the company
ANSWER : Oooh, that’s not good! Yea, sometime is hard to find the information of brands. Check at youfoosball.com for more info, here is the link… Complete Guide to Best Foosball Table Reviews 2016

Read Full Q/A … : Lifetime

What does the lower ball joint look like – Moog 2006 Buick LaCrosse Lower Ball Joint 06 Buick Lower Ball Joint K5
ANSWER : This is the lower ball joint

Read Full Q/A … : Lifetime

Are replacement parts available for lifetime basketball systems? Where?
ANSWER : Yes there are… take a look on the following link Amazon com lifetime basketball parts on amazon. Hope this was helpful. cheers

Read Full Q/A … : Lifetime

AB LOUNGE 2….I need the 2 bars that hold the front part of the legs to the back part of the legs of the ab lounger together. How can I obtain these 2 parts? Please does anyone know?????
ANSWER : Fitness Quest Customer Support: 800-321-9236http://www.bestdirect.tv/downloads/AB2.pdf Good luck.

Read Full Q/A … : Lifetime