Sport & Outdoor – Others

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

Swift Sport Optics were designed by birders for birders and subsequently been rated “Best Buy” by Cornell Laboratory of Ornithology, Better View Desired, and the English publication “British Birds.” Their 8.5×44 optical formula is in their opinion, the perfect ratio for the ultimate birdwatching binoculars.
Thanks for replying Steve, I now understand that Swifts were designed, manufactured and assembled in Japan.
we have continued to innovate and grow to ensure longevity and prove that Swift is a brand to trust.
What are the Advantages Self Focusing Binoculars? The fewer amount of moving parts means they are much easier to make and therefore tend to be cheaper, more robust and therefore often much longer lasting. This also makes them much easier to make fully dust and waterproof.
Where are they built? We use premium Japanese components for S, B, and RS Series optics. The S Series and B Series are assembled in a military standard (MIL-SPEC) facility in San Diego, and are then shipped to our headquarters in Lander, Wyoming where we inspect and test for quality assurance.
SWIFTPREMIER. PISTOL SCOPE COLLECTION

Offering superior optics featuring USA made, BaK7 Schott glass and fully multi-coated optics for 96% greater light transmission.

The Suzuki Swift (Japanese: スズキ・スイフト, Suzuki Suifuto) is a supermini car (B-segment) produced by Suzuki.
Where are U.S. Optics scopes made? All U.S. Optics scopes are designed, engineered, and developed by our talented engineers located in Connelly Springs, North Carolina. Our Foundation Series line of optics are domestically manufactured and assembled in North Carolina.
Sunagor`s Mega Zoom binoculars are the most powerful in the world, offering magnification up to 160 times.
The most powerful binoculars in the world is claimed by the Suangor 30-160×70 Mega Zoom BCFBinoculars. The world`s highest power binocular telescope is the Oberwerk BT-100XL-SD 100mm with up to 80x magnification.
For most of the twentieth century, manual focusing was the only method of focusing a camera until autofocus became a standard feature of more modern cameras in the 1980`s. Most professional photographers continue to forego using an autofocus system because manual focusing allows them maximum control over their images.
A: The first number is the magnification so 10 times compared to 20 times, so 20×50 is stronger.
Optical Differences

More light means more information and thus if all else is equal, there is the potential for brighter, better quality views through 10×50 binoculars versus 10×42 binoculars. However just being able to capture more light does not automatically make for a brighter, better quality view.

Products, such as binoculars and other sports optics are mainly manufactured in Japan, while some affordable models are produced in China. The optical glass, objective lenses, and microscopes are made in China.
The Vortex Crossfire and Crossfire II scopes are two of the most popular options on the market. These scopes are manufactured in China and offer a variety of features that are attractive to hunters and shooters.
In the beginning, most of the binoculars produced in Japan were of mediocre quality and were not in any way comparable to binoculars made in Europe. Over the years, manufacturers have employed efficient processes and high-quality raw materials to improve their optical performance.
Are 10×50 Binoculars Good for Hunting? A 10×50 pair of binoculars isn`t a bad choice for most types of hunting. You can get an idea of how useful this size is by thinking about the average distance of the shot you make. Shots are typically below 200 yards, and most whitetail deer are taken at 100 yards or less.
Ken`s Review of Swift Premier Waterproof 3-9×40 Rifle Scopes

One of the best scopes I have ever used, when facing the setting sun it is clear with no haze this is where my weaver, leupold and red field fail me. For the price of this scope you are not going to get a better scope.

Deon Optical Design are the creators and designers of MARCH Rifle Scopes, which are all hand-built in Japan by Japanese craftsmen using only genuine Japanese made parts to achieve the highest optical standards possible.
Wetzlar, Germany (Previously Hensoldt AG)

The factory in Wetzlar is home to the production of Zeiss sports optics products, including riflescopes, binoculars, and spotting scopes.

The new Suzuki Swift is a sporty hatchback perfect for your longer drivers due to its stylish, responsive, and clever performance and technology features.
Leupold riflescopes are all designed, machined, and assembled in our Beaverton Oregon manufacturing facility. We do not have any other riflescope manufacturing facilities or offices anywhere in the world.
The vast majority of Trijicon products, including ACOG®, VCOG®, RMR®, RMR®cc SRO®, MRO®, Iron Sights, MGRS®,Thermal Optics and Mounts are designed, engineered, machined, and assembled at our facilities in Wixom, Michigan or Auburn, California, and are therefore 100% Made in the USA.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

HI!
I continually get code 90 (low/NO flow) from my 8111. I have disassembled, cleaned EVERYTHING, including the inlet port AT the pump (remind everybody to check this as stuff gets past the filter basket and will plug the pump inlet).

There is No air in the system and I get superb pressure at the outlet, yet I still get code 90. I again removed the flow sensor and put my ohm meter across the flow sensor terminals and activated the flapper and measured an open circuit. I used a heavier magnet to see if I could get make the internals of the sensor move to get an ohm reading, but I get nothing but an open circuit, ie: no measured resistance.

Can I simply bypass the defective flow sensor to trick the 8111 to think it has full flow without damaging the ‘brain’ of the system.?

Intex corp is useless at these questions. They have been out of stock on this sensor for months and are telling me “two weeks” for two months and now it’s “end of August” which I do not believe. Meanwhile I am making no chlorine while the 90 code is showing.

I love the 8111, this is the first problem I’ve had with it, and I’m frustrated that I can not get such an important part from them.

Thanks for listening!

ANSWER : Have you been able to find a solution to this problem. I am having the same issue.

Read Full Q/A … : Sport & Outdoor – Others

Fixing Rowenta lighter
ANSWER : Pull apart in 2 parts…

Read Full Q/A … : Sport & Outdoor – Others

My swimming pool. I have just had my fifth IC 40 Intellichlor chlorine generator installed in 4 years at a cost of over $900 today. Each one has worked for no more than 8 months. The first three were replaces under three year warranty, the fourth by a factory rep and I bought the fifth today. The first three all failed with Flow Chk PCB error message. The fourth just stopped working on Sunday, no power or lights. A local Pentair warranty person, whom I paid a Service Call, unplugged the unit, opened the small power center cover, showed me the green light indicating that there was power, plugged in a new IC 40 which worked immediately (as did the other four). I asked if I should replace the power center and he said that it’s basically just a transformer and is working fine. We do get occasional power blips that make the clocks on microwaves, etc blink, but I thought that the power center essentially isolates the cell from these. I do have a Florida Power and Light surge protector on the electrical box that brings power into the house. I have now talked to the pool builder, two Pentair warranty repairmen and one factory rep. I am at a loss. They all tell me they have no idea why these units fail after less than a year. This last IC 40 was installed 3/24/2010, version 2.0 and now failed in less than 5 months. Should I replace the power center that the IC 40 plugs into. Any other suggestions. I have been told that this is the best chlorinator. I don’t want to keep replacing units. By the way, each unit had been spotless inside. I keep the water chemicals and salt levels at ideal levels. The units have never worked long enough to get dirty inside. The power center is connected to an Intellitouch control system outside with an indoor control panel. Last time I called Pentair North Carolina and got some smart alec tech person that had no suggestions. Please Help if you can.
ANSWER : I’ve had the same experiance. On my fifth one as well. Fail every year. No idea why.

Read Full Q/A … : Sport & Outdoor – Others

Fishing pole replacement tip. I have a replacement kit but how do you get the broken tip off. The end of the pole is not broken and the broken tip is still firmly glued on.
ANSWER : Most fishing rods are made of graphite, and are very easily breakable. i suggest that you find a way to CAREFULLY saw or file off the tip as close to the glue as you can, preserving as much of the rod as you can. maybe a knife or serrated blade of some sort could get through the tip. i have lost ALOT of fights with BIG fish and i usually end up replacing tips… NOTE that using a new tip will reduce sensitivity in your rod but not too much

Read Full Q/A … : Sport & Outdoor – Others

Hi,
After a recent snowstorm, the auger stopped turning on my Troy Bilt Two-Stage Snow Thrower (Storm 1130). I inspected it and found that I broke two shear pins and the auger drive belt appeared to need replacement. So, I replaced the pins and then replaced the auger drive belt, following the instructions in my operator’s manual. Now, when I hold down the lever that should cause the auger to start spinning, I get white smoke coming from the machine and a smell of burning rubber. I’m assuming I installed the drive belt incorrectly, but for the life of me, can’t figure out what I’m doing wrong. More significant snow is on the way tomorrow, so any quick answers/suggestions would be MOST appreciated!!!
ANSWER : The shear pins shear because the auger is stuck or the shaft it is on has seized bearings
work in that area

Read Full Q/A … : Sport & Outdoor – Others

Machine will stop adjusting resistance. On start up the machine will usually work. I can go through the calibration procedure and it will calibrate and work normally for 4 or 5 resistance adjustments. It will then stop adjusting. It acts like there is a cable pulled and refuses to adjust, even though I am not getting the warning telling me to “Release cable”
I have modified the wiring harness so that the wires do not fall off from the stepper motor, so this is not the problem. If I shut the machine down and leave it for several minutes, it will come back and work normal again… for a while. I am wondering if there is a problem with the sensors that are detecting a cable pull? Is there a way to disable those sensors to see if that is the problem
ANSWER : I would think that your problem has possibly to do with a faulty power supply, component, see to my mind it is a thermal problem as it heats up,it goes faulty? The Voltage changes and it goes out of spec.. When left to cool, it then is OK… Usually, & from my experience this is a thermal problem. To see obtain some Freeze Spray, from radio Shack or similar,and spray components on the main power board, and others too, use it on any large heat sinked components and see if when you do this the fault clears. Then replace that component(s).

Or as you suggest the sensors that feed the inputs maybe with sensors though one has little option but to replace them and see if this clears the problem.

Read Full Q/A … : Sport & Outdoor – Others

We found that we had a broken Shear Pin in our Thrust Nut. When we tried to replace it, we find that there is about a 1 inch difference between the hole on the whiffletree and the hole on the Thrust Nut.
What would have caused this and how do we adjust the whiffletree so the holes match?
ANSWER : Why don’t you put something in the hole to substitute for the shear pin and try to pull the shaft in the direction you need to line it up? It sounds like it could use the thrust nut to maintain the spacing to some degree.

Depending on the size of the shearpin hole you may be able to use rope or wire to form a loop and pull on the loop.

Read Full Q/A … : Sport & Outdoor – Others