Sport & Outdoor – Others

Safe is new, never opened. factory combination works & dial clicks to release, latch does start to turn just a little bit but catches & refuses to fully rotate & release. am working with Bass Pro to return it but undecided if I will accept a replacement or just a refund. It would be better if I could just get this one to work.

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

To protect against unwanted entry, the RedHead 1856 Gun Safe is constructed with heavy, 12-gauge steel, and has 2-way lock bolts, and a S&G electronic lock. Textured Charcoal finish with unique graphics. Weight: 490 lbs.
Honoring the lengthy RedHead® tradition of quality, and value since 1856 this Ultra Fire-Resistant Gun Safe provides 60 minutes of fire protection at 1400°.
The gun safe exceeds California DOJ required standards for firearm safety. Weight: 398 lbs. Dimensions: 60″Hx28″Wx20″D* (*add 1.5″ to depth for hardware).
ITW Red Head is a leading manufacturer of concrete anchoring and reinforcing solutions. A part of ITW Commercial Construction, ITW Red Head has helped drive innovation in the concrete anchor space with the very first Red Head anchor being developed in 1910.
Where is Redhead `s headquarters? Redhead is located in Lansing, Michigan, United States .
Contrary to what many people assume, redheads did not originate in Scandinavia, Scotland or Ireland, but in central Asia. Their coloring is due to a mutation in the MC1R gene that fails to produce sun-protective, skin-darkening eumelanin and instead causes pale skin, freckles and red hair.
Red hair is more fragile, and in shorter supply

Natural ginger hair strands are much more fragile than other hair types. And, while many redheads believe they have lots of hair, in general they technically have fewer strands.

Hardest gun safe to break into

Fort Knox Legend 7261 is made of 10-Gauge Stainless Steel and has 1/4″ Thick Steel, Uni-Body Construction. It is equipped with 3/8″ Steel Plate, 28 All-Active 1.5″ Solid Steel Locking Bolts, Drill Stop Hard Plate, Quadrafold Door Frame with Recessed Door and Glass Door Panel.

Level 5 safes feature 11-gauge steel construction. This strong steel outweighs 12-gauge by almost a half pound per square foot. You get a heavy safe that is strong enough to resist drilling attempts from burglars.
Redhead weight ranges from 2.0 to 2.5 lbs (907-1134 g), with males weighing an average of 2.4 lbs (1089 g) and females weighing an average of 2.1 lbs (953 g). It belongs to the genus Aythya, together with 11 other described species.
While safe rooms come in different sizes, the FEMA P-320 prescribes safe rooms to be between 8 feet x 8 feet x 8 feet and 14 feet x 14 feet x 8 feet – or between 512 cubic feet and 1,568 cubic feet. A safe room can be customized to meet your individual needs.
An affiliate of the Master Lock Company LLC, SentrySafe is the #1 personal safe brand in the company portfolio. The Master Lock Company is recognized around the world as the authentic, enduring name in padlocks and security products.
Redheads is an Australian brand of matches, originally manufactured by Bryant and May in Richmond, Victoria, but now manufactured in Sweden by Swedish Match.
All About Cannon Safes

Unlike Liberty safes, Cannon safes are made in Mexico, and are constructed from three pieces of steel, welded together.

Protector by First Alert Fire Resistant Executive Gun Safe 6742DF | First Alert Store.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Gun safe key lost – Stack-On Stack On 16 Gun Safe with Combination Lock
ANSWER : You csn get nfor from safe company that made it.. or just spend money on a lock smith….

Read Full Q/A … : Sport & Outdoor – Others

I have a tippmann custom pro with a cyclone feeder. I recently got the SAW stock to put on it and encountered some problems many times after I reassembled the gun. I took it apart at least 5 times before I thought it was fixed but now ive encountered another problem. I believe it has to do with the cyclone feeder not responding or something is out of line in the gun. When I picked up the gun to shoot, no paint came out so I took off the CO2 and the barrel and saw that the paintball was 1/3 inside the gun. I also have a problem when im shooting it sometimes does really fast burst. Thank you
ANSWER : Hi there. Tippmann markers are super tough to make sure that they are put back together properly. The stupid clamshell design plus all the little, under engineered parts make it difficult to get it back together properly, especially after installing a stock. I was in the paintball industry for 10 years but have been out of it for a little bit, but i was one of the founding members of Uprising Nation and was a gunsmith/ salesman for PaintballOnline.com / Xtremes. Now with that said…I even had trouble with the tippmann 98’s…and I can rebuild an autococker with my eyes closed but can sometimes be stumped by the tippy’s bad design. It is really tough to diagnose an issue on these guns without looking at it. You may have the ball detent backwards,l missing a pin, sometimes the after market stocks on those are a little too large on the outside diameter preventing the internals from properly seating. The cycloce system may be off due to the valves not meing properly aligned or the connecting rod not being in all the way. Many times though it is incorrect installation of the detent or the deternt gets damages. That little orange peice of **** flap is a mance. I would start there.

It may seem like i am bashing your gun. Im not… Once they are put together properly they work great. Just DONT TAKE THEM APART. lol. If you buy the parts at a local gun shop they will install them for free.

lol I have 6 guns for sale 🙂

Have a good day

Read Full Q/A … : Sport & Outdoor – Others

Can’t turn off beep sound on keypad of my stack-on Security Safes Electronic Lock for a 16 gun safe
ANSWER : You can turn off the “Beep” sound of the keypad by entering the code 633.
To turn the “Beep” sound on, enter the code 66

Read Full Q/A … : Sport & Outdoor – Others

Putting the gun together
ANSWER : Hi can you send me a pull down giude for winchester .22 model 250

Read Full Q/A … : Sport & Outdoor – Others

My gun just beeps when i pull the trigger even when hooked up to hpa.battery is new.last time i used the gun just before it messed up i had it hooked to o2 and it would fire then beep ,i have a anti syphon tube installed to. the air shot out the asa instead of the reg when i took off the tank.usually gun holds air with tank off then you shoot it to get rid of stored air,this time it shot out the asa????
ANSWER : You have probably messed up your solenoid, did you fire the marker straight up with the o2? I would make sure that all of the board settings are back to factory default especially the dwell and reattempt with compressed air. If the marker is still not firing get your hands on a new solenoid for it.

Read Full Q/A … : Sport & Outdoor – Others

Do I have to take the gun apart to get the battery in the gun???
and also before i was done with the gun my brother put the paintballs in the hopper but for some reason they were falling out of the barrel. Did I do something wrong???
ANSWER : No, you didn’t do anything wrong… Paintballs come in a variety of sizes. That difference is very hard to see with the naked eye, but your barrel knows what fits and what doesn’t. Players have a choice in barrels and ID-internal dimensions, so the balls are various sizes as well. You will have to sample a few brands and see what works best for you.Good luck!

Play hard, play safe, play with honor!

8^)

Read Full Q/A … : Sport & Outdoor – Others

I have a gun safe that is open the dial will not turn and the handle will not turn either. The safe door is open but I cannot get dial or handle to turn so that I can lock door. What can I do so that I can lock door to secure my guns?
ANSWER : Well the good news is that the door is open and not locked closed — do not close the door until the problem is for sure fixed. on the inside of the door there should be a access panel that is held on by some screws,, remove the screws and panel. now depending on the make and model of the safe there are a few things that could have happened here. there is a chance that a re-locker has failed and jammed the linkages from moving. ( NOTE : the dial should not turn until the handle is in the locked position ). now if you look at the bolt linkages ( top,bottom,and sides ) make sure that none of the bolts have jammed up against the exit holes of the metal of the door. lubricate all linkages using a silicone or teflon based lubricant. the next thing to check is to make sure that the bolt from the combo pack is not broken and jamming up the handle linkage. there are not many things that can go wrong with the safe — it is all just a bunch of levers and linkages and it has been my experience ( working as a locksmith for 18 years ) that this problem is a binding issue. again,, I cannot stress it enough to make sure you do not close the door until the issue is fixed and you have tried the combo several times and simulated a open and close ( handle lock and un-lock ) test.
if after all this you are still having issues – it is well worth the service call to have a locksmith stop by and service the safe, this will insure that the safe does not lock you out.

c…

Read Full Q/A … : Sport & Outdoor – Others