Sport & Outdoor – Others

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

Try to maintain a consistent salt level of between 2,700 parts per million (ppm) and 3,400 ppm, with 3,200 ppm being ideal. Clean the chlorinator cell at least once a season or as needed.
Salt Systems work best with approximately 3200 parts per million (ppm) of salt, which is roughly the equivalent to a teaspoon of salt per gallon. However, all Hayward Salt Systems are designed to operate with salt levels anywhere from 2700 ppm to 3400 ppm.
The easiest way to ascertain if the chlorinator is working is to make sure the cell is clean by checking the needle or production lights. Ensure there is enough salt in the pool. On the chlorinator box there should be a light or dial that indicates it is working.
Crank up your salt water chlorinator

Since it`s summer, set your salt water chlorinator to 80% to 100%. You`re going to need all the chlorine you`re going to get from your unit as your pool will need it due to a number of reasons: UV rays from the sunlight will β€œeat” your chlorine faster.

With a properly sized filter and salt chlorinator, run times of 7 – 8 hours will generally be necessary. The defining factor governing filtration times in a salt pool is usually determined by the size of the filter/ioniser and the need to make sufficient chlorine.
Most units use between 6.2 Volts dc and 9.2 Volts ac and operate between 10 and 30 Amps. To control the operation of the cell – i.e., provide switching, water flow monitoring, gas sensing, etc.
The saltwater chlorinator needs a sufficient flow of water for effective operation. A dirty skimmer basket, clogged or dirty filter, and a clogged pump strainer, can cause insufficient water flow for the chlorinator to produce less chlorine.
To produce chlorine, the chlorinator requires salt. We recommend 5 kg of salt per m3 of water for a Normal Salt mode (NS), 2,5kg per m3 for a Low Salt mode (LS) and 1,5kg per m3 for Ultra Low Salt mode (ULS).
Regardless of how frequently or what system you use to add chlorine to the water, the chlorine level should stay between 1.0 and 3.0 parts per million (ppm) to maintain a healthy pool. Anything higher will make you run the risk of red eyes and swimmers itch.
Having a 25 GPH chlorinator set to 100% will produce 200 grams of chlorine a day at 50% it will produce 100 grams a day simply multiplying the output of the chlorination by the hours it runs.
When the pool water temperature drops between 65-62 degrees (depending on the brand), the salt cell will automatically shut down to preserve the lifespan of the cell.
It takes about twenty-four hours for dissolved salt to dissolve sufficiently, so leaving the pump on during this process helps. Test the salt level of the water periodically until it reaches 3500 ppm or the required level as set out in your manufacturer`s instructions.
Saltwater Pool Chlorinators use an electrolytic cell to sanitise your swimming pool by adding a small amount of salt to the pool water. This converts the chloride in the salt water into chlorine, killing bacteria and other microorganisms that can cause illness. This process is much more efficient and cost-effective.
The only way to lower the salt concentration of your swimming pool`s water is to dilute it. Unfortunately, this means you will need to partially drain your pool and refill it with fresh water. This is true because salt doesn`t wear out, break down or evaporate; only your water will evaporate.
On average, most pools will need the saltwater generator to be on 8-12 hours per day. This will produce adequate levels of chlorine to properly sanitize the pool`s water.
General disinfection 1000 ppm Add 1 tablet per 1 litre of warm water.
A chlorinator consumes only a very small amount of current. Thus for a 100 m3 pool, the annual electricity consumption will be between 150 and 200 W.
The dose is measured in grams per hour; usually chlorinators can dose between 15-35grams, with bigger pools needing the full 35 gram dosage. This dosage may be higher or lower depending upon what climate you live in, and how much sun your pool is exposed to, as sunlight breaks down chlorine.
Inground Swimming Pools

Some commercial properties require 24-hour a day pump circulation, but as a homeowner, this is not advisable. If you are lucky enough to own an Energy Efficient, Variable Speed swimming pool pump (VSP) then, yes, technically you could run your pump for 24 hours a day.

GPM * 0.012 * PPM = PPD

This formula calculates a required size chlorinator in pounds of chlorine per day (PPD), given the Gallons Per Minute (GPM) solution flow and the Parts Per Million (PPM) chlorine dosage.

A Salt Chlorinator uses 0.12 – 0.2kw per hour and will cost 3.6 – 6 cents per hour to run.
Capacity: 0.5 to 30 M3/H.
The salt cell generators are made to work when pool water temperatures are above 60 degrees. In pool water temperatures that are 60 degrees or below, the salt generators simply shut down and by design do not allow the salt cell to ionize (breakdown) the salt and convert it to chlorine.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Im looking manual instructions for coleman Sahara tent
ANSWER : Go on youtube, you will find some excellent videos on how to….on a range of tents. I saw the coleman sahara tent on a video last year as I was considering buying one! Good luck!

Read Full Q/A … : Sport & Outdoor – Others

18′ x 48″ intex pool. Upgraded to 2500GPH filter and salt system. Water is GREEN. Salt level was too high. So I drained 1/3 of pool. added fresh and changed filter. Added a little fresh salt back. Levels should be good. Ran chlorinator for 11 hours – still green – help please!
ANSWER : Hi,A problem salt-system pool owners encounter is that the pH rises over
time. If the pH is over about 8.3, then your chlorine is rendered
partially ineffective, meaning you can have a high free-chlorine
reading, but it is restricted. Test the pH and add muriatic acid to
maintain your pH is between 7.4 and 7.6.Let me know,if needed further assistance.Hope i helped you.Thanks for using ‘ Fixya ‘ and have a nice day!!

Read Full Q/A … : Sport & Outdoor – Others

Need instructions for a coleman salt lake tent
ANSWER : Are you still in need?I have just bought one and could send you a photo of the instructions.

Read Full Q/A … : Sport & Outdoor – Others

Need instructions and any attatchments for a fuji mx-1200 digital
ANSWER : Here is support page: MX-1200Here FAQ:

Who can I contact if I cannot find the information or download that I need?
FUJIFILM Technology FAQs
Digital Camera FAQs
all FAQs for this product.Here Mac Software

FinePixViewer Updater OSX

FinePixViewer Updater OS9Windows Software: Serial Camera Software Here Technical Support Form.And , Last but not Least, the user manual: DX/MX Software User’s Guide.Let me know if you are satisfied.

Read Full Q/A … : Sport & Outdoor – Others

My swimming pool. I have just had my fifth IC 40 Intellichlor chlorine generator installed in 4 years at a cost of over $900 today. Each one has worked for no more than 8 months. The first three were replaces under three year warranty, the fourth by a factory rep and I bought the fifth today. The first three all failed with Flow Chk PCB error message. The fourth just stopped working on Sunday, no power or lights. A local Pentair warranty person, whom I paid a Service Call, unplugged the unit, opened the small power center cover, showed me the green light indicating that there was power, plugged in a new IC 40 which worked immediately (as did the other four). I asked if I should replace the power center and he said that it’s basically just a transformer and is working fine. We do get occasional power blips that make the clocks on microwaves, etc blink, but I thought that the power center essentially isolates the cell from these. I do have a Florida Power and Light surge protector on the electrical box that brings power into the house. I have now talked to the pool builder, two Pentair warranty repairmen and one factory rep. I am at a loss. They all tell me they have no idea why these units fail after less than a year. This last IC 40 was installed 3/24/2010, version 2.0 and now failed in less than 5 months. Should I replace the power center that the IC 40 plugs into. Any other suggestions. I have been told that this is the best chlorinator. I don’t want to keep replacing units. By the way, each unit had been spotless inside. I keep the water chemicals and salt levels at ideal levels. The units have never worked long enough to get dirty inside. The power center is connected to an Intellitouch control system outside with an indoor control panel. Last time I called Pentair North Carolina and got some smart alec tech person that had no suggestions. Please Help if you can.
ANSWER : I’ve had the same experiance. On my fifth one as well. Fail every year. No idea why.

Read Full Q/A … : Sport & Outdoor – Others

We have model#38025 Toro 1800 snow blower that I am trying to fix. My husband accidentally got an electrical extension cord wrapped around the cylindrical curved inside and it’s jammed in pretty good. I have tried getting a manual online with no luck and we do not have a manual because the people who gave it to us forgot to give us the manual. I need to know how to get inside so that I can free the cord. Help please!
ANSWER : Here is the owner manual and the parts catalogue for your guide. You must have an Adobe Acrobat Reader installed in your pc to view thi file cause its pdf format.1. manuals/38025_operator_3327-516.pdf 2. manuals/38025_parts_3319-653.pdf

Read Full Q/A … : Sport & Outdoor – Others

The instructions I got are not exactly for the tent in the bag, so I need to find out the specific instructions for my tent rther than the generic instructions it came with.
ANSWER : Search on the internet for the manufacturer’s name, and the tent model. Most have instruction sheets downloadable from their websites. If that doesn’t work, and they can’t help you by email, then try to find a scout troop or outdoors club in your area, who may be able to help you find instructions or even someone with a similar tent.

Read Full Q/A … : Sport & Outdoor – Others