10′ X 10′ Sundome Tent 9160K101

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

A: Dayana, The Coleman poles are 27″ long each (68.58 cm) so they are longer than what you cu…
The Coleman Sundome Tent is one of the more water resistant Coleman tents in the market. Without any additional waterproofing, the Sundome Tent can withstand up to 35 minutes of heavy rain, and a few hours of light to moderate rain.
To measure with a tape measure you need to remove a section from your pole, lay a tape measure or ruler on a table and put the section, end down, on to the tape measure. Now read the diameter. Trying to measure the diameter by holding the tape up to the pole is nearly impossible to do accurately.
The Long Pole in the Tent Meaning

Definition: 1) The part of a task that will take the longest amount of time to complete; 2) the most critical part of a task.

The tentpole is a unique structure of the female gametophyte in Ginkgo biloba; however, its exact functions in the reproductive process are unclear. In the present study, we used semi-thin sectioning and electron microscopy to study the structure and function of the tentpole during fertilization in G. biloba.
Each end of the pole should fit onto a fastener or pocket along the exterior of your tent, near the ground. Repeat with the cross pole, then the additional support poles until the tent is fully popped up and accessible.
Has your tent pole broken? Don`t panic! This isn`t a fault, fibreglass tent poles may well break when put under too much pressure, they`re actually designed that way to try and prevent damaging the rest of your tent. The good news is, fibreglass poles can often be replaced.
(1) Poles with inserts -the insert is a tube (or sleeve) that is typically glued inside one hollow end of a tent pole section and protrudes approximately 1 1/2″. This insert allows you to stack one section on top of another.
Freestanding tents function just as their name implies: The tent bodies can hold their shape on their own without needing to be staked out. These designs receive their support from included tent poles and can be picked up and moved around camp without going limp.
Waterproof ratings for tents are measured in millimetres and will usually be between 1000mm (the lowest level considered waterproof) and 10,000mm. The higher the rating, the more waterproof a tent will be. Ratings are measured using a hydrostatic head test but these ratings don`t take into account wind driven rain.
However, even for some experienced campers, we remain unaware that tents are not fully waterproof! Feeling the material, we might think that tents can repel water completely, but contrary to popular belief, tents are only water-resistant.
You will need 1/8” thick shock cord and about 1-2 ft. longer than the length of the entire pole for each pole (if you have a 10ft pole get about 12ft, some say a ¾ 1. ratio might be better). Remove the end tip, and the shock cord will be tied in a knot (either on a washer or on the end tip of the pole).
The rod, perch, or pole (sometimes also lug) is a surveyor`s tool and unit of length of various historical definitions, often between approximately 3 and 8 meters (9 ft 10 in and 26 ft 2 in).
Carbon fiber tent poles

Carbon fiber tent poles are the best material you can get a tent pole in! They are the strongest, most durable, and lightest tent poles available.

The difference between aluminum and fiberglass tent poles is that aluminum poles are lighter, stronger, longer lasting and a better choice for backpacking tents or large tents. Fiberglass poles are cheaper to produce however, so you`ll often see fiberglass tent poles used in budget casual camping tents.
Standard stake lengths range from 18 inches to 42 inches long, with diameters ranging from 5/8 inch to 1 inch with common commercial stakes sized from 42″ x 1″ to 36″ x 1″. Watch our Tent Staking Demonstration / Staking Guidelines on YouTube for staking safety, hold strength, tips and tricks.
A broken tent pole is a painful, but relatively common camping mishap. Causes range from strong winds to poles weakened by age to cheap materials—and sometimes, it`s just plain old wear and tear.
Lantern posts helps prevent wildfires and keeps campers safe as they provide a secure place to hang one`s flammable light source. Just make sure to extinguish the flame before going to bed.
Well, rest assured, it is no big issue – it is only there to make pitching easier by ensuring the sections stay together while you thread them through the sleeves and place under tension. The lack of an elastic cord in no way affects the tent integrity.
The skeleton of the tent – the poles or air tubes. Basically, there are two main types of tent pole: Bendy ones and rigid ones. Bendy ones are more flexible and usually lighter, rigid ones are generally more robust and heavy-duty.
2. Fix a broken tent pole. Generally, tent poles are pretty robust, but should you arrive at the campsite to find that one of yours is damaged, find a suitable stick and use your duct tape to attach it to the damaged pole for extra reinforcement.
Most Coleman tent poles are made of fiberglass, stored in sections, connected together by a shock cord with two vinyl caps on the ends. Fiberglass poles are a strong-but-cheap option for your tent poles.
It is made up of two elements to be fixed to the wall, and a rack which holds up to 6 poles. Made in steel, it is characterised by an exclusive CLOSABLE and REMOVABLE system which limits the space occupied on the wall, thus increasing safety.
Pole Tents require drilling into the concrete and use of concrete anchors where we attach eye bolts (instead of stakes) to attach our ratchet straps. Frame Tents can be anchored with concrete anchors (like Pole Tents) or by the use of barrels which alleviates the need to drill (additional charge per barrel).

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Square tent with 2 types gazebo poles, varenda, 2 side windows
ANSWER : The 2 longest of the poles go in an x over the center of the tent and the 2 shorter ones go arch to the sides. http://www.wenzelco.com/details.aspx?NavID=412shows a picture very similar to your tent. If you go to image 2 it shows it with out the fly. now if you got 2 sets of 4 poles, 2 long and 2 short, and one set is all aluminum, then I would go with the aluminum set. It is less likely to collapse in high winds.

I need new poles for Swiss Gear tent # SG33071F
ANSWER : Go to Home depot and buy a tube that fit the pole. Cut it into 5 or 6 inches for the broken areas. It costs me less than 2 dollars. Let me know how it turn out on yours.

How to stabalize four tent poles in an open area.
ANSWER : If you get four sturdy poles (not normal tent poles) then the best thing to do is to stake the four poles into the ground at a 60 degree angle with the top away from the tent and then use the tension created by the angle to support the tarp.

Swiss Gear Tent – Broken Poles SG33071F
ANSWER : Take a look on amazon for replacement. here: Amazon com tent poles. I hope this was helpful. Cheers

How to put up a coleman tucana tent – Coleman 10' X 10' Sundome Tent 9160K101
ANSWER : Wow. They put more and more stuff on tents. I’ll give it a try based on a photo I found.First, peg the four corners down. This will help it from moving around.Find the two longest poles. These are your main supports and once you get them in, you can use the tent without the fancy rain cover (if you want to). They should run diagonally from the corner’s you pegged. Start at one corner and slide the poles through the sleeves in the top of the tent towards the opposite corner. The next two longest go from back to front. They do not cross diagonally. Slide these into their sleeves.Now the hardest part. Slide a pole into a peg hole or a pin (if your poles have holes in the bottom), then bend the pole and attach it to it’s corresponding corner. Just let the bent poles lay on the ground. Do the same with the others. It shouldn’t matter which poles go up first, but I would do the diagonals myself, then the side supports. Once these 4 poles are up, you’re in business.To attach the monster rain cover flip the whole thing over the top and figure out which side goes to the door. It looks like the lantern is on the right front. It looks like you should have two poles left. One may be the same size as the side support poles, or very close to it. This is the front door pole. The smallest pole is the side roof support.Slide the front door sleeve through it’s sleeve, then attach it to the pins or holes where the diagonally support poles are. They should have two pins in this spot, one for ea pole. Next, slide the side support pole side to side under the roof, but over the tent. It should have little pockets to put the pole into. Last, you’ll have to bungie the hooks to the little rings at each corner of the rain cover. Forget all the strings, unless you want to stake them out to stretch your tent a little. Hope this helped. Alley

Set up instructions for coleman tent – Coleman 10' X 10' Sundome Tent 9160K101
ANSWER : This may be the manual for you tent:

http://www.colemancanada.ca/pdfs/en/2000002058.pdf

Some other manuals for Coleman tent products are available here:

http://www.colemancanada.ca/manuals/tents.en.aspx

Sorry someone has not responded sooner.

Where can i get assembly instructions for great outdoor tent
ANSWER : You can get instructions for Great outdoor tents if their not too old from Great Outdoors Hastings