HINK IT IS ACTUALLY A 38/40 CAL. THE SERIAL NO. IS 324564B. THE RIFLE IS IN GOOD CONDITION. DO YOU THINK IT WOULD BE SAFE TO FIRE TODAYS AMMO?
Sport & Outdoor – Others
Experienced athletes share their insights in answering this question:
If its what you are saying then it is a winchester model 1873. if it is and is in original condition and you havent tried to “clean” it up you need to get in touch with the people at www.rarewinchesters.com as they would be the best source of info. oh and please turn off the caps lock.
How to Identify and Resolve Common Issues ?
We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :
The Model 1866 Winchester carbine is an improvement over the Henry Rifle, and depending on each model`s release year and its condition, they can sell for anywhere between $10,000-$30,000.
There were only 132 One of One Thousand rifles produced in the Winchester 1873 Model, and a scant eight of the Model 1873 One of One Hundreds– only six of which are known today.
The longevity and special features is one big reason Winchester firearms have high valuation above other manufacturers to this day. Lot 1025: Exceptional Winchester Model 1866 Saddle Ring Carbine.
Product Details. Winchester® . 38 Special 130 Grain FMJ Centerfire Handgun Ammo is a wise choice for serious centerfire handgun shooters who demand sure functioning rounds that deliver accuracy with controlled recoil shot after shot. An ideal choice for training or extended sessions at the range.
38 Special is a smaller round, with a bullet diameter of . 357 inches, while the . 40 S&W has a bullet diameter of . 400 inches.
The fixed, tubular magazine has a maximum capacity of fourteen rounds (thirteen for . 44 and . 45 caliber rifles).
The . 50-110 WCF (also known as the . 50-100-450 WCF , with different loadings) in modern 1886 Winchesters with modern steel barrels is the most powerful lever-action cartridge, with up to 4,000 foot-pounds (5,400 J) of energy.
After its 1989 bankruptcy, the company was acquired by the Belgian arms maker, FN Herstal, which also owns Browning. The privately owned company continues to manufacture under the Winchester Repeating Arms brand.
The 45 90 and 45 70 are identical in all dimensions except their case length. The 45-70 has a case length of 2.105” while the 45-90 measures 2.40”. This means that it is possible to fire 45-70 cartridges in a rifle chambered for 45-90.
History. Most individual manufacturers habitually put serial numbers on the weapons they produce. Such numbers can be used to ascertain the name of the manufacture, place and date of manufacture. At least for some manufacturers, a serial number can unlock myriad details about the weapon.
Today, the Winchester Model 70 may be the best rifle the company has ever made. They beat the pants off anything Remington has ever produced, and they`ve turned many of us into believers in their rifles again.
However, one property stands out: the Betts House, a 21,000-sqaure-foot mansion built in 1868 and acquired by Yale in 1972. Although the house itself is not known to be haunted, it has connections to Sarah Winchester, who is the inspiration for one of America`s most compelling ghost stories.
The Rigby Rising Bite is a British-made rifle that is known for its exceptional accuracy and quality. It features a distinctive engraving design and is made from high-grade materials such as fine walnut and steel. The Rigby Rising Bite is a collector`s item and is priced at $250,000.
Those identified as a Gold Dealer normally have a large selection on hand. “Even though we are a Gold Dealer, we can`t get the Henry rifles right now because production has cut because of a reduced work force and an inability to manufacture guns, rifles and firearms,” said Smitty.
38 Special is taller than 9mm and has a larger case capacity. Both calibers are popular for self defense and perform well in ballistic gel tests. . 38 Special concealed carry revolvers typically have 5-round capacity; 9mm concealed carry pistols typically have a 7-round+ capacity.
38mm Special offers low recoil when compared to the 9mm Luger. Bothe these cartridges have lesser recoil as compared to other cartridges like .
The 45 ACP is a lower pressure round and can handle 21,000 psi of pressure per SAAMI specs. In contrast, the 38 Super is rater for higher pressure and can handle 36,500 psi, which is 14,500 psi higher than 45 and 1,500 psi higher than 9mm Luger.
Looking at the spec chart, you`ll notice that the 357 Mag and the 38 Special are almost identical except for two major dimensions. The case length of the 357 Magnum is 1/8 of an inch longer and has a maximum pressure that is twice that of 38 Special.
Quick draw and hip shooting was a rare skill in the West, and only a handful of historically known gunslingers were known to be fast, such as Luke Short, John Wesley Hardin, and Wild Bill Hickok.
Colt Single Action Army Revolver
Probably the most famous of the Old West guns, the Colt six-shooter became renowned as the `gun that won the West`.
Transition to true guns
Fire lance barrels made of metal appeared by 1276. Earlier in 1259 a pellet wad that filled the barrel was recorded to have been used as a fire lance projectile, making it the first recorded bullet in history.
The large-loop rifle is also associated with John Wayne, who used a . 44-40 Winchester `92 version in many films.
For the vast majority of hunters under field conditions, the maximum effective range of the . 308 Winchester is around 300 yards, and 400 would be pushing it. At these ranges, the terminal ballistic performance of a well-designed hunting bullet fired from the . 308 is usually very good.
In the 1800s the idea of a repeating rifle was finally realized by Oliver Winchester, the largest stockholder of the New Haven Arms Company of Connecticut. He was assigned U.S. patent No. 5501, which protected improvements to the Henry Rifle.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
I have the Intex Sand/Pump pool filter Model SF 20110. It’s been running real great for the last 4 months. However recently it has been tripping the internal overloads and I have found the pump motor to be very hot when I put my hand against it. I have tried several different solutions, such as a level ground platform that was clear of any obstructions, made sure that the motor vents under the motor was clear of anything that would prevent air flow. I used a non electrical type of lubricate on the impeller. When I would turn on the pump the rotor would not turn but only would hum very loudly and then slowly begin to turn. I also noticed that the motor’s rotor shaft would not turn to freely due the tightness around the rotor’s shaft. After using the lubricate the shaft would turn a little easier. I used an amp meter on the incoming voltage line and the motor would run at 4.5 amp. And yet it still overheated and tripped the motor overloads. I can only think that the motor is still not getting enough ventilation. I have check and cleared all the incoming lines and found nothing block the pumps input or output lines. Any suggestion?
ANSWER : I just looking into this issue my self. The pump cools itself by a internal fan, which is run by the motor. Well I took the housing cover off to find out all the fan blades have broken off and were setting in the base of the pump. Once you remove the fan blades from covering the air intake, it might be fine. I will find out my self once summer gets here.
Read Full Q/A … : Sport & Outdoor – Others
Winchester model 100 semi-auto 308 cal. how to disassemble?
ANSWER : IMPORTANT Recall info:
WINCHESTER MODEL 100 FIRING PIN RECALL – A notice dated 7-1990 relates the following
“PRODUCT SAFETY WARNING AND REPLACEMENT NOTICE. Attention owners of Winchester model 100
rifles and carbines please read this notice. In July of 1990 the following product safety
warning was issued by Winchester. It has come to our attention that the firing pin in the
Winchester Model 100 Rifle or Carbine may break due to use and metal fatigue and become
lodged in the breech bolt face. If this occurs, the firearm may fire before the action is
locked causing severe damage to the firearm and possibly injury or death to the shooter
and bystander.
WARNING DO NOT SHOOT YOUR WINCHESTER MODEL 100 RIFLE OR CARBINE. Repair and replacement.
A new firing pin has been designed to replace the firing pin originally made for the
Winchester Model 100 Rifle and Carbine. The new firing pins will be available in April
1991. If you own a Winchester Model 100 Rifle or Carbine, please send your firearm to one
of the authorized Winchester Model 100 Firing Pin Replacement Centers indicated below.
Your Winchester Model 100 firearm will be inspected, the firing pin replaced and tested
and the firearm returned to you. The inspection, replacement/testing and return postage
will be accomplished at no cost to you. If other repair or maintenance work is authorized
by you to be performed on the firearm when the firing pin is replaced, such work shall be
at your cost.”
W. R. Long Gunsmiths 2007 Brook Road North Cobourg, Ontario K9A4W4Canada Frank LeFever & Sons RD 2 Box 31Lee Center, NY 13363USA Bolsa Gunsmithing7404 Bolsa AvenueWestminister, CA 92683USA Nu Line Guns1053 Caulks Hill RoadHarvester, MO 63303USA
If you have any questions concerning this notice, call Winchester Product Service
1-800-852-5734 or write to Winchester Firing Pin replacement Notice, PO Box 10 Cottage
Hills Illinois 62018 Attention Product Service Dept.
———————————————————————————-
The following is Wisner’s rendition & info on the subject.
The difference in the old firing pin and the new one is as follows. The old replaced
style, was totally lathe tuned (round). While the new recall style is similar in lathe
turning on the front and back, but in the front midsection it has two flats milled, one
on each side. This makes the center section stronger. Also replaced is the bolt sleeve
lock pin (firing pin guide) which was made to accommodate this different shaped firing
pin
Part number for the new parts are, firing pin =1391ND, bolt sleeve locking pin =1491ND
The word was at the time this recall was in process was that if the firing pin would
break at the mid section and still remain in the gun as two pieces, the possibility of a
premature discharge before the bolt was locked was possible. This apparently was caused
by the firing pin tip (now not having a retracting spring) to be stuck forward, and
thereby slam-firing upon chambering.
The responsibility for the recall apparently was on Olin, as they were the parent company
at time of manufacture. Olin set up regional recall centers at three established US
gunshops. There was a manufacturing delay in the replacement firing pins, and a backlog
occurred, also some collectors did not like the idea of shipping their guns long
distances. Olin then also authorized other gunshops to make the required alterations.
Upon completion of the recall, the shops were to test fire the firearm and to stamp an
assigned letter on the inside top of the receiver as seen thru the magazine well with the
bolt retracted. The letter “B” represented Bolsa Gunsmithing, “L” was Lefever, and “N”
was for Nu-line Guns. The letter “X” apparently was for all the other independent shops.
However this identification information did not get communicated to some of the smaller
shops at the start of the project. The only way to tell if the gun as been modified, if
the ”letter” is not present, is to take the barrel & action out of the stock, remove the
trigger guard assembly and the try to rotate the firing pin by twisting it. If it does
NOT rotate, then the firing pin recall HAS been performed.
For link back to the parts & price list that we make & have for sale CLICK HERE
Copyright © 2004-2007 Wisner’s Inc. All Rights Reserved
Back to Additional information To Winchester model 88 & 100 parts
Originated 01-13-2001 Last Modified 03-19-2007LeeRoy Wisner
WINCHESTER MODEL 100 FIRING PIN RECALL – A notice dated 7-1990 relates the following
“PRODUCT SAFETY WARNING AND REPLACEMENT NOTICE. Attention owners of Winchester model 100
rifles and carbines please read this notice. In July of 1990 the following product safety
warning was issued by Winchester. It has come to our attention that the firing pin in the
Winchester Model 100 Rifle or Carbine may break due to use and metal fatigue and become
lodged in the breech bolt face. If this occurs, the firearm may fire before the action is
locked causing severe damage to the firearm and possibly injury or death to the shooter
and bystander.
WARNING DO NOT SHOOT YOUR WINCHESTER MODEL 100 RIFLE OR CARBINE. Repair and replacement.
A new firing pin has been designed to replace the firing pin originally made for the
Winchester Model 100 Rifle and Carbine. The new firing pins will be available in April
1991. If you own a Winchester Model 100 Rifle or Carbine, please send your firearm to one
of the authorized Winchester Model 100 Firing Pin Replacement Centers indicated below.
Your Winchester Model 100 firearm will be inspected, the firing pin replaced and tested
and the firearm returned to you. The inspection, replacement/testing and return postage
will be accomplished at no cost to you. If other repair or maintenance work is authorized
by you to be performed on the firearm when the firing pin is replaced, such work shall be
at your cost.”
W. R. Long Gunsmiths 2007 Brook Road North Cobourg, Ontario K9A4W4Canada Frank LeFever & Sons RD 2 Box 31Lee Center, NY 13363USA Bolsa Gunsmithing7404 Bolsa AvenueWestminister, CA 92683USA Nu Line Guns1053 Caulks Hill RoadHarvester, MO 63303USA
If you have any questions concerning this notice, call Winchester Product Service
1-800-852-5734 or write to Winchester Firing Pin replacement Notice, PO Box 10 Cottage
Hills Illinois 62018 Attention Product Service Dept.
———————————————————————————-
The following is Wisner’s rendition & info on the subject.
The difference in the old firing pin and the new one is as follows. The old replaced
style, was totally lathe tuned (round). While the new recall style is similar in lathe
turning on the front and back, but in the front midsection it has two flats milled, one
on each side. This makes the center section stronger. Also replaced is the bolt sleeve
lock pin (firing pin guide) which was made to accommodate this different shaped firing
pin
Part number for the new parts are, firing pin =1391ND, bolt sleeve locking pin =1491ND
The word was at the time this recall was in process was that if the firing pin would
break at the mid section and still remain in the gun as two pieces, the possibility of a
premature discharge before the bolt was locked was possible. This apparently was caused
by the firing pin tip (now not having a retracting spring) to be stuck forward, and
thereby slam-firing upon chambering.
The responsibility for the recall apparently was on Olin, as they were the parent company
at time of manufacture. Olin set up regional recall centers at three established US
gunshops. There was a manufacturing delay in the replacement firing pins, and a backlog
occurred, also some collectors did not like the idea of shipping their guns long
distances. Olin then also authorized other gunshops to make the required alterations.
Upon completion of the recall, the shops were to test fire the firearm and to stamp an
assigned letter on the inside top of the receiver as seen thru the magazine well with the
bolt retracted. The letter “B” represented Bolsa Gunsmithing, “L” was Lefever, and “N”
was for Nu-line Guns. The letter “X” apparently was for all the other independent shops.
However this identification information did not get communicated to some of the smaller
shops at the start of the project. The only way to tell if the gun as been modified, if
the ”letter” is not present, is to take the barrel & action out of the stock, remove the
trigger guard assembly and the try to rotate the firing pin by twisting it. If it does
NOT rotate, then the firing pin recall HAS been performed.
For link back to the parts & price list that we make & have for sale CLICK HERE
Copyright © 2004-2007 Wisner’s Inc. All Rights Reserved
Back to Additional information To Winchester model 88 & 100 parts
Originated 01-13-2001 Last Modified 03-19-2007LeeRoy Wisner
Read Full Q/A … : Sport & Outdoor – Others
Hi i was wondering if i could get an estimated value of this winchester rifle. it is an 1886 model 33 cal rifle serial number 139297 and was a special order gun made in 1906. according to the Winchester museum in Wyoming there was only 3 made. Any help would be great thanks.
ANSWER : Take a look at http://www.gunsinternational.com/Winchester-Model-1886-Rifles.cfm?cat_id=501&start_row=51
and other sites and you can just about make your own estimate
Read Full Q/A … : Sport & Outdoor – Others
My swimming pool. I have just had my fifth IC 40 Intellichlor chlorine generator installed in 4 years at a cost of over $900 today. Each one has worked for no more than 8 months. The first three were replaces under three year warranty, the fourth by a factory rep and I bought the fifth today. The first three all failed with Flow Chk PCB error message. The fourth just stopped working on Sunday, no power or lights. A local Pentair warranty person, whom I paid a Service Call, unplugged the unit, opened the small power center cover, showed me the green light indicating that there was power, plugged in a new IC 40 which worked immediately (as did the other four). I asked if I should replace the power center and he said that it’s basically just a transformer and is working fine. We do get occasional power blips that make the clocks on microwaves, etc blink, but I thought that the power center essentially isolates the cell from these. I do have a Florida Power and Light surge protector on the electrical box that brings power into the house. I have now talked to the pool builder, two Pentair warranty repairmen and one factory rep. I am at a loss. They all tell me they have no idea why these units fail after less than a year. This last IC 40 was installed 3/24/2010, version 2.0 and now failed in less than 5 months. Should I replace the power center that the IC 40 plugs into. Any other suggestions. I have been told that this is the best chlorinator. I don’t want to keep replacing units. By the way, each unit had been spotless inside. I keep the water chemicals and salt levels at ideal levels. The units have never worked long enough to get dirty inside. The power center is connected to an Intellitouch control system outside with an indoor control panel. Last time I called Pentair North Carolina and got some smart alec tech person that had no suggestions. Please Help if you can.
ANSWER : I’ve had the same experiance. On my fifth one as well. Fail every year. No idea why.
Read Full Q/A … : Sport & Outdoor – Others
Winchester 94 serial numbers
ANSWER : It’s worth what someone is willing to pay for it. Which is another way of say, book value is great, but only if someone is willing to offer that. http://www.firearmspriceguide.com/guns/search/winchester/ gives a broad idea of the range of prices, but makes no specific mention of the Limited Edition walmart model.
Read Full Q/A … : Sport & Outdoor – Others
Dan Wesson Arms Serial Numbers
ANSWER : The receiver or barrel will be stamped with the correct caliber.
Read Full Q/A … : Sport & Outdoor – Others
I just bought a winchester 308 model 100 rifle,
ANSWER : HELLO THERE
Please go to www.winchester.com and you will be able to enter your model number and there will be a viewable manual for this and there is also telephone numbers for tech support ok>
Please go to www.winchester.com and you will be able to enter your model number and there will be a viewable manual for this and there is also telephone numbers for tech support ok>
Read Full Q/A … : Sport & Outdoor – Others
