98 Custom Act Paintball Gun

I dont know exactly what to fix or change because i can hardly get one or two paintballs to fire half the time.
Experienced athletes share their insights in answering this question:
It could be a combination of a number of things.. most likely it has to do with the type of paint you’re shooting; in regards to shell.. tippman guns are harder on paint therefore require a harder shell paint, also not all paintballs are exactly .68 caliber, meaning some a bigger and some are smaller.. could be that they’re slightly to big for the bore of you barrell

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

If the inner diameter of your paintball barrel is too snug then it can break paint in the barrel and breech, especially with fragile paint. Try a different barrel, barrel back or insert with a larger inner diameter. Your accuracy may suffer a bit, but that is better than no ball making it out the barrel at all.
As Loneassassin said, paintballs usually only curve if they are dimpled, or if they have gotten dirty. If the paint is good, and it is still curving, then it is probably picking up some dirt or lube somewhere. Make sure your hopper is clean.
Waterball is where you take a bag of paint and you add a little water to the bag. Why would I add water to my paintballs?? Well, as we all know the paintballs are biodegradable. The water will cause shell to soften up, making them less brittle.
Tippmann 98 Custom Platinum Series Paintball Marker Gun Ultra Basic, Semi-Auto.
An incomplete discharge occurs when a round is fired but gets lodged inside the gun barrel. A second round shot after the incomplete discharge will strike the lodged round and can cause the gun to explode.
Remember that cold and/or dry conditions make the shell of paintballs more brittle and more likely to break in your hopper and markers. The opposite is also true, that hot and/or humid conditions will make your paintballs softer and bouncier. Keep your paintballs warm during your day of play.
While playing in the rain, it is also important to protect your paintballs and equipment. Paintballs can turn squishy with just a single drop of water and water can ruin the interworking of a marker. If you bring your own paintball gun, you can wrap tape around the grip frame of your marker.
Moisture on paintballs, can expand the outer shell and jam up in the barrel. Most paintballs have a water-based fill. Consequently, if paintballs are left in a lot of water for a period, they will take on the appearance of little water balloons.
When paintballs are left in temperatures under 70 degrees, the gelatin fill hardens and makes the outer shell become brittle. When the shell becomes brittle, it can easily break inside the barrel of the paintball gun before coming out.
Paintballs can just as easily shatter from the cold as they can melt from the heat, so aim for a room temperature inside your bag. Too much premature cold exposure can cause the paint to become brittle and prone to cracks or breaks with the lightest touch.
Our of the box, The Tippmann 98 custom is a semi-automatic paintball gun, with a decent fire rate of 8 balls per second.
Firing Velocity & Speed °: 260 FPS – 315 FPS. Double Trigger °: No.
After every cleaning, your gun with solvents, you should oil your gun. Again, you only need a very thin layer of oil. Always follow up any lubrication by running a dry patch through the barrel twice. If your firearm has been in long-term storage, be sure to wipe it out again before you fire that first shot.
For instance, if you`re a competitive precision shooter, even . 5 MOA might be a sign that you need to replace your barrel. If you`ve found your barrel is so worn that it`s decreased your accuracy to the point that shooting your preferred targets is no longer viable, it`s time to replace it.
A bullet isn`t likely to go off when you drop the cartridge for various reasons, including how it lands. Most dropped bullets land tip first on a floor or the ground. When this happens, the bullet will land in a way that prevents the impact from being sufficiently forceful to cause the bullet to fire.
The average paintball player uses approximately 200 paintballs per hour of play. You can adjust this number depending on your mood and level of competitiveness. If you need to get out some aggressions, you can estimate to add about 100 more.
For an average casual paintball player with a balanced gaming style, 100 paintballs can last for u 45 minutes up to an hour. The more competitive players can easily blast through 100 paintballs in around 15 minutes.
If you shoot a barrel of gasoline with a normal bullet can it actually explode or light up? No. There is not enough oxygen for a combustion let alone an explosion. Movies are where oil drums explode from a single bullet.
The timing depends on how many paintballs you purchase, for example, 150 paintballs will last about an hour. 300 paintballs, about 2 hours (the average) and 500 paintballs is approximately 3 hours.
If you shoot a barrel of gasoline with a normal bullet can it actually explode or light up? No. There is not enough oxygen for a combustion let alone an explosion. Movies are where oil drums explode from a single bullet.
Paintballs are perishable and get worse over time. Normally, they have an average shelf life of three to six months however they can last much longer if stored properly. Two things that you must take care of when storing your paintballs are humidity and temperature and there is a whole science behind this.
Moisture on paintballs, can expand the outer shell and jam up in the barrel. Most paintballs have a water-based fill. Consequently, if paintballs are left in a lot of water for a period, they will take on the appearance of little water balloons.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Paintballs keep blowing up in my tippmann 98 custom HELP!
ANSWER : It could be a combination of a number of things.. most likely it has to do with the type of paint you’re shooting; in regards to shell.. tippman guns are harder on paint therefore require a harder shell paint, also not all paintballs are exactly .68 caliber, meaning some a bigger and some are smaller.. could be that they’re slightly to big for the bore of you barrell

Read Full Q/A … : 98 Custom Act Paintball Gun

Paintballs fall out of tippmann 98 – Tippmann 98 Custom Act Paintball Gun
ANSWER : Go to ebay and buy a new ball detent for the 98 they are cheap and well worth it because how many times have you got shot for double balling 🙂

Read Full Q/A … : 98 Custom Act Paintball Gun

How to set velocity on tippnan 98 custom – Tippmann 98 Custom Act Paintball Gun
ANSWER : There is a velocity adjuster on the left side of the body, just below and to the right of the “N” in “TIPPMANN.”

In order to adjust the velocity you need to be in a place where it is safe and legal to fire your marker (paintball field, with all bystanders protected by netting or paintball goggles.) You will need a chronograph and a 3/16-inch hex wrench.

The adjuster is a screw that blocks the gas flow from the valve to the bolt. If you screw it in (clockwise) it blocks more of the gas, so your velocity goes down. If you screw it out (anti-clockwise) it blocks less gas, so the velocity goes up.

Just take a shot over the chronograph to check your velocity, adjust and check again until you get it where you want it. Most paintball fields limit velocity to 285 feet per second. Never go above 300 feet per second, as velocities above that are unsafe (beyond paintball goggle ratings and can cause damage and infection on skin due to the heavy impact.)

It is important to test and adjust the velocity before each day of play, and even multiple times during the day as weather changes, because it is affected by temperature.

Read Full Q/A … : 98 Custom Act Paintball Gun

Hello, I have an old Tippman A5 (about 5-6 years
ANSWER : You will have to buy a different barrel for the A5, I would suggest ansgear.com, rockstartactical.com, or ebay. Make sure that you get the right threads along with an apex capeable front. I would suggest the sly carbon fibur barrels, or get a autococker barrel and a lapco adapter for your A5. Hope this helps if you have any questions just let me know.

Read Full Q/A … : 98 Custom Act Paintball Gun

I attempted to put a car stock on my Tippmann 98 custom and took apart the gun but the stock didnt fit, now when i put it back together and shot it with my tank connected the gun wont stay cocked and little CO2 is coming out with each shot the sound is very low as opposed to my other Tipmann 98 custom where its loud and stays cocked. What do i do?
ANSWER : Check the O rings on the big metal striker, make sure that you have the spring on the back (where the stock would have went) in the right hole on the back plate. Make sure that your velocity is set to a reasonable level.

Read Full Q/A … : 98 Custom Act Paintball Gun

I have just brought a 98 tippmann custom and it has come with a C02 bottle. i cannot get the bottle filled round here so i was wondering if i brought a Air bottle can i use it in the custom?
ANSWER : Yes, you can use a compressed air tank on a Tippmann 98 custom. 48ci 3K psi tanks can be purchased for around $30.

Read Full Q/A … : 98 Custom Act Paintball Gun

Wont stay cocked – Tippmann 98 Custom Act Paintball Gun
ANSWER : If you ran out of air, it won’t stay cocked.
OR
The sear may have been displaced. That would require a disassemble. It is not that difficult, just do it on a white pillowcase and be sure not to let any springs fly all over the place.

Read Full Q/A … : 98 Custom Act Paintball Gun