e should do about it?
Sport & Outdoor – Others

Experienced athletes share their insights in answering this question:
If you can walk on your treadmill but you get a burning smell from it, you have a bad problem and discontinue use immediately and unplug the treadmill.Burning smells are most commonly associated with the following problems:1) Very high belt/deck friction.2) Short in the motor.3) Short in the wiring or electronics. 4) Literally cooking the lacquer or cardboard core (on cheap machines) in the motor from belt friction or a drive system obstruction.Friction is the #1 cause of this problem. Many cheaper treadmills have a motor with a cardboard core (people wonder why we are so down on cheap treadmills) and if the voltage and amperage through the motor heats it up sufficiently, it begins to smolder. If this is the case, you normally have to replace the belt and the motor and inspect the deck. If the armature has cooked enough in the motor, you also have to replace the motor.If the belt and deck check out OK, check for a short in the motor. You can run the motor with an independent power source like a fully-charged cordless drill battery to see if the symptoms are the same. Click on the following link for our motor test. http://www.treadmilldoctor.com/Motor-TestingIf the belt and deck check out and the motor is OK, then check your wiring and electronics for signs of scorching and replace the appropriate part(s).

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

When the motor and its cooling fans become clogged with dust and hair over time, it starts to overheat and cause a burning smell. To avoid this, you have to clean your motor at least twice a year regularly, especially if you have pets that shed hair or if you leave your treadmill uncovered.
If you notice a burning smell from the treadmill, it could indicate something serious. Immediately turn off the treadmill, and unplug the power cord from the wall. Common causes of a burning smell from a treadmill include friction between the deck and back or a short in the wiring, electronics, or motor.
A loose power cord that could lead to sparking, smoking and fire is the reason nearly 20,000 treadmills are being recalled in North America.
Phantosmia is when a person smells something that is not actually there. The smells vary between individuals but are usually unpleasant, such as burnt toast, metallic, or chemical smells. Possible causes range from nasal polyps to a stroke. Phantosmia is also called a phantom smell or an olfactory hallucination.
Phantosmia is a condition that causes you to smell odors that aren`t actually present. When this happens, it`s sometimes called an olfactory hallucination. The types of odors people smell vary from person to person. Some might notice the odor in just one nostril, while others have it in both.
White vinegar cuts through odors naturally. Try wiping down furniture, washable walls, floors, etc. with white vinegar. Also, try placing several bowls of vinegar around the room with the smoke damage, leaving them there for several days.
If your car smells like burning rubber, turn off the engine and check under the hood to see if anything looks out of place. Chances are that the smell results from a belt or other part slipping and rubbing against the hot engine. If you can`t identify the problem, take your car to a mechanic.
Cons of Putting a Treadmill in a Garage

The hot and cold temperatures can mess up your treadmill motor and function. Exposure to moisture and water can break the treadmill. The garage must be swept, blown, and cleaned to avoid dirt build-up. Debris and dust can damage the moving parts in a treadmill.

More specifically, heat caused by excess friction and amp draw. Friction occurs whenever you step on a treadmill belt and start walking, but the real issues arise when the belt is not properly lubricated.
To sum it up, the most common problem with treadmills is due to too much belt deck friction, which can be eliminated by keeping a regular lubrication schedule. The parts that fail from this are the walking belt, deck, drive belt, rollers, motor, drive pulley, and electronics.
Although lots of people think smelling something burning is a sign of a stroke, there`s no solid evidence this is true. The idea of smelling phantom burning toast may be kind of amusing — but strokes are serious. They affect approximately 795,000 Americans each year — and around 137,000 of those people die as a result.
Your kidneys serve several purposes, including the filtering out of waste products from your blood for removal from the body in urine. If the kidneys aren`t functioning well, waste materials may build up in the body. Those materials can produce an ammonia-like smell that you may notice in the back of your nose.
The scent of blood is potentially one of the most fundamental and survival-relevant olfactory cues in humans.
If the smell of smoke occurs suddenly and continues for less than a few minutes, the site of origin is likely the smell region of the inner temporal lobe of the brain, called the uncus. The source could be an abnormal electrical discharge or “firing” in the brain (a seizure).
That being said, an electrical fire can smell like the following: Burning Plastic: The acrid odor of an electrical fire is often described as that of burning plastic. This is because wiring insulation, connectors, and many other electrical components are made of plastic materials.
What does a gas leak smell like in your house? Natural gas is odorless, but a substance known as mercaptan is added to your natural gas so that it gives off a pungent rotten egg smell. If you notice this odor in your home, it`s possible you have a natural gas leak.
Does Boiling Vinegar Remove Odors? Boiling a mix of water and vinegar after you cook can help neutralize the odors. Combine 1 cup of water and 3 or 4 tablespoons of white vinegar in a small pot. Heat it to boiling, remove the lid and let it continue boiling for several minutes.
Burnt milk can be tweaked into simple milk drinks by adding ingredients such as dates syrup, jaggery, chocolate, turmeric or saffron. This will help reduce the smoky flavour and charred taste and texture of the burnt milk.
Every time you finish a load in your washer, keep the door open instead of closing it — yes, even if you`re not using it. Gazzo says the fresh air will cause the water to evaporate faster, ultimately ensuring your washer stays dry and mold-free and your clothes smell the way you want them to.
While machines have been endowed with the sense of vision, speech, sound and touch thanks to the efforts of researchers for many decades, the concept of smell has eluded the machines. That is to say that humans have been unable to replicate this ability due to their own lack of understanding of olfactory functions.
The Belt-Drive Motor Is Overheating

Some air conditioning systems are equipped with a belt-drive blower rather than a direct-drive blower. These systems have a rubber belt with them and can wear out over time and cause a burning rubber smell.

In terms of monitoring wound healing, burns are typically given 3 weeks to heal. If, by the 3-week mark, deep partial thickness or full-thickness burns appear unlikely to heal by secondary intention without contracture, they are debrided and resurfaced with full-thickness skin grafts or local flaps.
On average, treadmills use about 600 to 700 watts of electricity. A treadmill costs an average of $1.20 to use for a month, and $14.39 to use for a year. The best way to save on electricity is to install solar panels.
Static shocks are unpleasant reactions that can put a damper on your workout. Synthetic materials like polyester and nylon build up a significantly higher static charge, and they love to transfer that charge to anything nearby. The result? A powerful zap as you`re trying to work up a sweat.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Hello, i think i figured out what it was, after breaking down the valve again i was looking at the rubber that is around the valves and i was thinking at first this wasnt an extra part, but come to find out after many hours of researching online it is an peice that comes off but its just glued on, its a (Spider) gasket. So do u think if nothing is wrong with the valve itself that if the spider gasket is wearing away and starting to get britle that it will let the debris i vacuum up come back in the pool and let the backwash valve leak when its on the filter position? I cant thank u enough for helping me. You sure have lead me in the right direction and saved me alot of money. Otherwise i would of probably gave up and bought another one….thanks and let me know if u think that the buying a spider gasket will solve my problems
ANSWER : The spider gasket that you refer to is what seals the chambers from each other. Leaking here can have a large impact on how well the valve is able to do its job. But, I don’t remember seeing one in the parts diagram. If you are able to obtain one, then by all means, replace it if you can. As I said earlier, you are essentially rebuilding the valve assembly. If something looks worn, now is the time to repair / replace it during reassembly. I also have a suggestion for you as well. Take good pictures, document everything that you do when you disassemble and reassemble the valve. Then write up a tip (gotta become an expert) for others to read through and be able to service their own equipment. I was surprised to see that there were as many other questions asked about the same filter that you have. Highly recommend that you do this. As many times as you have taken this apart and put it back together, you are fast becoming an authority on it!Glad to see that you are sticking it through, and not throwing in the towel. After all is said and done, you will have a working knowledge of how your filter works, and be able to identify issues in the future before they become a problem. Congratulations!

Read Full Q/A … : Sport & Outdoor – Others

I have an 8100 ES Reebok treadmill. There is a squeaking noise coming from the drive motor. It is coming from the non-belt side (if facing the front of the treadmill, the left of the drive motor. When the treadmill is turned off, I can manually move the walking belt in the walking / running direction and it will squeak. If I move it in the opposite direction, manually it does not squeak. Also, if I need to lubricate the bearings can you tell me how to get to them to do this. The motor has plenty of power and no other problems, only squeaking. I have sprayed a belt lubricant on the belt and also blown it all out with a can of compressed air (used for computer key boards).
ANSWER : Hi.the bearings in these machines should be lubricated and sealed for life. they are not designed to be touched. it sounds like you have done the important bits. belt lubrication and blowing out any debris that may be there. squeaks like this can be incredibly difficult to find, but can also be incredibly annoying.the main things that you can do is keep watching to try and find exactly where the squeak is coming from and check for anything wrapped around the edge of the roller.keep using the belt spray, and the compessed air.a good grade silicone lubricating spray used at the edges of the rollers, by the bearings and around the motor and gearbox unit may also help but do not get this spray on the belt as it can be very slippery.squeaks like this can start and stop on their own or develop slowly and go just as slowly.keep doing the maintenance you are doing, and use the silicone spray as described above.it may take a little while for the spray to work its way into the bearings as they are fairly well sealed but you should notice an improvement after a few days.please feel free to ask for further advice if you need

Read Full Q/A … : Sport & Outdoor – Others

2011 ninja 1000 fuel pump not coming on
first cycle of the key, but injectors come on.

Engine killed when i hit a bump and let out clutch.
I restarted it and let out clutch and it killed again.
I parked the bike on the stand and let it sit for an hour, then i restarted it and the bike started up, when i gave it gas it backed fire.
Do you think it could be the fuel pump or relay? The shop thinks it could be the kick stand switch, but even acts up on neutral and the gas pump doesn’t come on first cycle of key when cold. Only injectors come on.

ANSWER : I would agree with the shop, as far as check the simply things first.while trouble shooting you want to start with the easy things, if you jump right into the pricey things and that is not it you have spent money and time and still have the problem. If you have a multimeter it will make this pretty easy. put your meter on the ohm setting and open and close the switch ( sidestand, clutch, ect.) if one of your safety swtich is not working right it will make your bike act up. start with that and if they are all working as they should please let me know and we can go deeper into it. I had a bike come into the shop that would cut out while riding, every bump every turn. I chased my tail because i didn’t start simple. i sent a lot of time and ended up paying for a fuel pump out of pocket because that wasn’t the problem. All the switches where working and nothing seemed right everything was working. after a few days while raising the bike on the left i notched the side stand moving a little with ever little bump on the way up. long story short the spring on the side stand had lost it’s ” spring” and won’t hold the side stand up right, every bump every turn the side stand moved a little letting the switch open and kill the bike .let me know what you find and if you need more help I’ll get and send you the wiring diagram and we can start work out the problem.M.Woodring

Read Full Q/A … : Sport & Outdoor – Others

We have a bad smell in our Rockwood 8284ss 5th wheel. It is hard to describe because it is not coming from the stool. There is not much odor when flushed and is not very strong in bathroom. It seems to be strongest in the storage compartment under the front of the camper and also then in the bedroom area there and at the front end of the slide out inside. The closest I can come to describing the smell is to say it smells like a bunch of dirty diapers in a pile or wet clothes that have been standing. Maybe a little on the urine smell also. This has been noticeable for about the last week. As far as I can tell there is nothing wet sitting in any of those areas and we have had no leaks in the camper that we know of.
ANSWER : Sounds like your holding tank is leaking.

Read Full Q/A … : Sport & Outdoor – Others

Hello, I have a Horizon Fitness Quantum II treadmill. The incline doesn’t adjust. I have found limited troubleshooting information about this problem on their website. It told me to check the electrical harness connection, which I did (unplugged and reseated). It also said “make sure there are no lights lite on the circuit board – I DO have lights lit.

Do you have a repair manual, or information about the problem with the incline, or how I should interpret the problem indicated by the red lights on the board which are on?

Thanks,
Darrell

ANSWER : Http://www.horizonfitness.com/uploadedFiles/Customer_Support/Horizon_Fitness/Troubleshooting/Treadmill/Universal_Calibration_Instructions.pdf this link cover how to calibrate your model and perform the test mode to troubleshoot any problems

Read Full Q/A … : Sport & Outdoor – Others

I have a TX500, never been used (just out of the box) and had to get an electrician to my home for this problem. It will start rolling but quits in a few seconds. The electrician believes that it is a problem in the sensor that rides at the belt. There is only one sensor in the pulley; he thinks that perhaps there should be two as there is a hole placement opposite the one that is in there. When the belt quits, it goes to a number 3 on the board which he thinks is the sensor as well. If he is correct, where do we get another magnet to place there? If he is not correct, please offer help. We did not get a owners manual in the box and surely could use one; where can we get one? Please help…thankyou
ANSWER : Hello,I believe the best thing to do at this point is to look for a way to get the manual of the device, this will give a full guide and better understanding on how to fix this problem.Check maualnguide.com to search for the manual of the device, the link provides almost all manuals to all device.Take care.

Read Full Q/A … : Sport & Outdoor – Others

I have a York Stellar model mid efficiency furnace Model # P?UCD12N07601A, Serial # EXAM3600524 installed in 1992. The HSI was replaced approximately 3 months ago. Over the last two weeks the ventor motor comes on, the HSI lights but does not ignite the gas. The ventor motor runns continously and the HSI continues to turn off and on without gas ignition. Some times by turning the ventor motor off and on (by opening and closing the bottom furnace faces panel door) will give be ignition after the HSI goes through 1-4 cycles. If I can’t get it to work I call my furnace repair guy. The serviceman thought it was the pressure switch and ordered one. Just this last weekend I had no heat and another service guy came in replaced the HSI again and adjusted the pressure switch and said this fix should work. Less than a day later furnace still experiencing the same problem-Ventor motor comes on, HSI comes on but no gas ignition. ventor motor runs continuously and the temperature in the house drops! I’m frustrated and the servicemen don’t seem to know how to fix the problem for good.
ANSWER : Make sure the vent pipes that exhaust the fumes are not blocked in any way and also check the drain line to be sure it is not kinked from the vent motor to the trap. Take the hoses off the vent motor and the pressure switch and make sure all the hoses are clean and free from debris also check the trap on the drain hose and make sure it has water in it if it doesn’t this will creat a negative pressure in the vent motor housing not allowing the vent pressure switch to make.

Read Full Q/A … : Sport & Outdoor – Others