Leisurerite spa manual – Sport & Outdoor – Others

4 Fill your Spa with clean, cold water only, by placing a garden hose directly into the Spa. The correct water level is indicated on the skimmer faceplate located inside the spa. Make sure all jets are open. (Turn jet faces clockwise).

We`re here to tell you that there are two options: fill the pool with a water truck or do it yourself using a hose. Most people head to the hose, and that is a viable solution if you are a very patient person, have multiple hoses and are not using well water.

You can mix chlorine and warm water together around the drained spa pool, letting it rest for 10-15 minutes and then clean with a soft rag or scrubber. You can also rinse the spa surface with a garden hose after for additional cleaning.

In most cases it is advised not to fill your hot tub or spa directly with hot water but if you do, make sure the water temperature is not excessive, for the best result remove air lock (see below) then increase the cool water in the main water area by putting the hot water into cool which will slowly increase the …