Sport & Outdoor – Others

Experienced athletes share their insights in answering this question:
Hi,These are not small instructions that could be offered. There are many things that needs to be taken care of while installing a Zodiac Paperback Braceless Pool. The best i could do, i could offer you a link for a Guide :-http://www.amazon.com/Ultimate-Guide-Above-Ground-Pools/dp/0071425144The above one guide is available at cost effective Rate. You need to have all the precautions and setting as per the Book.Let me know, if need further assistance.Hope i helped you.Thanks for using ‘ Fixya ‘ and have a nice day!!

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

Never leave your cleaner in the pool while adding chemicals to the water, as high chemical concentrations can harm the cleaner. Allow the water plenty of time to circulate, and recheck the water balance before returning it to the pool for another cleaning cycle.
Never leave your cleaner in the pool while adding chemicals to the water, as high chemical concentrations can harm the cleaner. Allow the water plenty of time to circulate, and recheck the water balance before returning it to the pool for another cleaning cycle.
Never leave your cleaner in the pool while adding chemicals to the water, as high chemical concentrations can harm the cleaner. Allow the water plenty of time to circulate, and recheck the water balance before returning it to the pool for another cleaning cycle.
Salt Levels

If you are having problems with your chlorine generator, the first thing to do is to make sure you have enough salt in the pool water. The Zodiac saltwater chlorinator will require about four thousand parts per million salt in the pool water.

The climbing ability of the cleaner is dependent on the pool`s shape and available water flow. If Zodiac MX6/MX8 is not climbing your walls, ensure the flow is correct by counting wheel speed. Also, ensure the pools surface is not covered in algae as this slippery surface will affect the cleaner`s traction.
Never leave your cleaner in the pool while adding chemicals to the water, as high chemical concentrations can harm the cleaner. Allow the water plenty of time to circulate, and recheck the water balance before returning it to the pool for another cleaning cycle.
Use a rake to gather the debris pieces into a pile, and then remove the pile by hand. Bag it and dump it in a garbage. If the debris is floating and not in the bottom of the pool, you can opt for a leaf net to trap the debris along the water`s surface.
Aboveground Pool Vacuuming Instructions

Hook the vacuum head to the pole and attach the vacuum hose to the head. 3. Hold the other end of the vacuum hose with the vacuum adapter or vacuum plate attached in front of the eyeball where the water blows back into the pool. Allow the hose to fill with water.

How Long to Run a Pool Vacuum. If you have a manual vacuum, you`ll run it as long as it takes for your to vacuum your pool. If you have an automated vacuum, it will run anywhere between two and six hours depending on your pool size.
A: A vacuum gauge should be installed on the drain port under the strainer basket of the pump. The gauge may also be installed on the pipe after all suction pipes merge before entering the pump. The gauge should not be installed on the port near the impeller; this would measure the pressure not the vacuum.
The suction side refers to the pipes and fittings that bring water out of the pool to be filtered; that water which is being “sucked” out of the pool by the filter pump. Usually this is the pool skimmer, although some older pools have a dedicated vacuum line.
The lid, diffuser, and housing gaskets (seal plate gasket) are all types of o-rings that provide tight seals. The final and most important seal is the shaft seal, which prevents water from getting into the motor. Likewise, the seal plate encloses this seal and attaches the pump housing to the motor.
Ensure that the valve to the skimmer that the vacuum hose is connected to, is fully open. Slowly close the Main Drain valve about halfway, this is the optimal setting for vacuuming.
A normal pool valve setting would have the skimmer valve(s) fully open, main drain half-open and spa drain fully closed. To operate a suction pool cleaner or manually vacuum the pool, you can close other skimmers, or close the main drain, to obtain more suction through the skimmer you are using.
If it`s winter, and you`ve left the pool cover on the whole time, you can run the cleaner once a month for good measure. If it`s summer, and you`re using the pool a few hours a day, but covering it the rest of the time, you should run the cleaner at least twice a week.
In 1996, Zodiac South Africa acquired the global BARACUDA® business.
Cleaners aren`t meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.
When rainwater and `run off` enter the pool, they can change your water`s pH, calcium hardness, total dissolved solids (TDS), alkalinity, and other chemical levels as well as bring contaminants such as dirt and debris into the pool.
To rack the balls, use the triangular rack. Place the one ball at the apex over the marker on the pool table. Randomly fill in the other balls, ensuring the ten ball is in the middle of the third row. To ensure a tight rack for ten ball, place all fifteen balls in the rack when setting up the game.
Most units use between 6.2 Volts dc and 9.2 Volts ac and operate between 10 and 30 Amps.
It should be vigorous bubbling. If the bubbling sounds weak then your cell might be nearing the end of its life or there might be something wrong. Salt Cells are usually rated to last 10,000 hours of runtime or about five years of usage.
The easiest way to ascertain if the chlorinator is working is to make sure the cell is clean by checking the needle or production lights. Ensure there is enough salt in the pool. On the chlorinator box there should be a light or dial that indicates it is working.
The most common reason robotic pool cleaners suddenly stop climbing your pool wall is because the surface becomes slippery due to algae build up. When algae starts to build up in your pool it forms a thin transparent film over the hard surface of your pool.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Installation instructions to install a Zodiac Paperback braceless pool
ANSWER : Hi,These are not small instructions that could be offered. There are many things that needs to be taken care of while installing a Zodiac Paperback Braceless Pool. The best i could do, i could offer you a link for a Guide :-http://www.amazon.com/Ultimate-Guide-Above-Ground-Pools/dp/0071425144The above one guide is available at cost effective Rate. You need to have all the precautions and setting as per the Book.Let me know, if need further assistance.Hope i helped you.Thanks for using ‘ Fixya ‘ and have a nice day!!

Read Full Q/A … : Sport & Outdoor – Others

How many hours a day should you run your pump? How many hours a day is it safe to run your intex pool pump, to insure a clean pool? I purchased my pool last summer and had major problems all year. When i got my pool my pump did not work and i had to wait a week for a new one to be shipped, well after that i had nothing but problems. My boyfriend said it was not good to let pump run all day but i think hes wrong. Can you give me some good tips on keeping my pool crystal clear?
ANSWER : Some pumps are 24hr 7days pumps some are not and should be on a timer. time usually run for 8 hours max a day. you can get a time from most pool leisure places. the pump will say if its a 24hr pump if not then would say its a timer type.

Read Full Q/A … : Sport & Outdoor – Others

Rhode Gear Toddler Seat Installation Instructions?
ANSWER : The company was bought by Bell Inc and broken up and sold, The Australian company Co-Pilot bought the rights to make the seat. Eventually found the manual with this info!Hope this helps :-)http://www.bicycletrailers.com/assets/product_files/instructions/CoPilot/copilot_limo_taxi_manual.pdf

Read Full Q/A … : Sport & Outdoor – Others

Pool about to overflow
ANSWER : Syphon it (see link). It will be easier if it is an above ground pool.

http://en.wikipedia.org/wiki/Syphon

Read Full Q/A … : Sport & Outdoor – Others

Hello,
I am renting a home in NJ, and would like to open our pool. I am not very savvy when it comes to inground pools… i tried to figure out how to turn my Hayward S244T Hi Rate Sand Filter on, and get it going. While i did manage to get water pumping into the pool, it was not filtering out.

Can you please explain to me what i am suppose to do, and how to do it. I have an owners manual, but i find it very hard to follow, and everything is already installed, i am just having problems filtering it out.

Thanks!
Christine Mincer

ANSWER : Hello c anna…. Opening up the pool is a pretty big job with lots of steps. That said, here is an excellent link which has all of the steps broken down

http://www.poolcenter.com/spring.htm

Joe

Thanks for choosing Fixya!

Read Full Q/A … : Sport & Outdoor – Others

My swimming pool. I have just had my fifth IC 40 Intellichlor chlorine generator installed in 4 years at a cost of over $900 today. Each one has worked for no more than 8 months. The first three were replaces under three year warranty, the fourth by a factory rep and I bought the fifth today. The first three all failed with Flow Chk PCB error message. The fourth just stopped working on Sunday, no power or lights. A local Pentair warranty person, whom I paid a Service Call, unplugged the unit, opened the small power center cover, showed me the green light indicating that there was power, plugged in a new IC 40 which worked immediately (as did the other four). I asked if I should replace the power center and he said that it’s basically just a transformer and is working fine. We do get occasional power blips that make the clocks on microwaves, etc blink, but I thought that the power center essentially isolates the cell from these. I do have a Florida Power and Light surge protector on the electrical box that brings power into the house. I have now talked to the pool builder, two Pentair warranty repairmen and one factory rep. I am at a loss. They all tell me they have no idea why these units fail after less than a year. This last IC 40 was installed 3/24/2010, version 2.0 and now failed in less than 5 months. Should I replace the power center that the IC 40 plugs into. Any other suggestions. I have been told that this is the best chlorinator. I don’t want to keep replacing units. By the way, each unit had been spotless inside. I keep the water chemicals and salt levels at ideal levels. The units have never worked long enough to get dirty inside. The power center is connected to an Intellitouch control system outside with an indoor control panel. Last time I called Pentair North Carolina and got some smart alec tech person that had no suggestions. Please Help if you can.
ANSWER : I’ve had the same experiance. On my fifth one as well. Fail every year. No idea why.

Read Full Q/A … : Sport & Outdoor – Others

Installation-help I think our Burley d’lite is 2003 or so. we haven’t used it for awhile and I don’t know where the installation instructions are.
ANSWER : Here are some tutorials at the Burley site:

http://www.burley.com/support/tutorials.cfm

Current Manuals:

http://www.burley.com/support/manuals_current.cfm

Archived manuals:

http://www.burley.com/support/manuals_archive.cfm

Hitch Guide:

http://www.burley.com/support/guides/09%20Burley%20Hitch%20Guide.pdf

Something should work for you.

Burley Design4685 Cloudburst WayEugene, OR 97402Tel: 541-687-1644Toll Free (US & Canada): 800-311-5294Fax: 541-687-0436Email: [email protected]

Read Full Q/A … : Sport & Outdoor – Others