the yards. I have 2 small dogs and I can’t let them out i
Sport & Outdoor – Others

Experienced athletes share their insights in answering this question:
You could probably continue the vinyl fencing but that will cost a lot. You could always use a chain link fence which is really cheap and easy to install but it won’t look right.

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

There are two methods you can try in order to fix the gap. You can glue a rubber door sweep underneath the gate, or you can place a speedbump underneath the gate in the gap. You can also create your own speedbump by using concrete.
Fixing gaps under fences or gates can be as simple as piling stones, rocks, or concrete blocks over the unwanted space.
There are a lot of fence material types and styles to consider, but vinyl remains the top choice for a low maintenance fence. Vinyl fences are growing popular among homeowners and other types of property owners because they require less maintenance than other fences.
PVC cement dries quickly, so use extreme care when applying it. All gates require 2″ of clearance under the bottom rail on level ground. Except for Post & Rail, all gate hardware requires a 1″ space for hinges and 3/4″ for latches. Post & Rail gates require 1 1/2″ for hinges and 1 1/4″ for latches.
Bamboo screens are a great way to add privacy to any metal or wrought iron fence and gate. Bamboo screens come in large rolls and can be cut to size. They are easy to install and provide instant privacy. Bamboo is also a very strong and durable material.
Fitting the Gate

Decide how much of a gap you need between the bottom of your gate and the ground. This would be typically 25-50mm (1-2”) to provide clearance of any unevenness in the ground when the gate is opening.

PVC fencing. The cheapest way to create a fence for your home is by getting one made from PVC. Such fences substitute wooden pickets and stakes to offer your protection from the outside world. PVC sleeves improve the stability of wooden posts used as a fence, reducing the cost of material and the labor used.
Wrought Iron Fencing

The wrought iron fence is the strongest and most long-lasting fencing option available. Featuring a classic design with wide spaces that beautifully display landscape and gardens, you won`t find more a suitable option for vintage and retro style homes.

If you can find a good source of free pallets, a DIY wood pallet fence can be one of the cheapest options for a privacy fence. Pallets come in a few sizes, but the most common standard dimension is 48 inches by 40 inches, which means it can be on the short side for a fence.
Steel. As we mentioned above, galvanized steel chain-link fencing is the longest lasting type of fence. It is not the most popular type of fence, however, because it lacks privacy and curb appeal.
To summarize, a wooden fence is undoubtedly the best option for privacy. An iron fence is the best fit for home security and durability. A chain link fence is best left for homeowners on tighter budgets without too many security or privacy concerns.
Yes, you can build next to your neighbour`s fence. As long as you`re inside your property line you`re fine. One consideration: your posts might have to be staggered relative to the fence posts of the existing fence. Staggered posting avoids interference with existing piers.
A good rule of thumb is to make your gaps no larger than 4 inches for the sake of children and pet safety, but there`s also much more to consider. The first thing you should do before picking up the shovel or hammer is to measure the span of your future fence and where your posts will go.
We typically recommend that your gate area be no wider than four feet when building a single wood fence gate. Anything wider than that and you will need to measure and build a double gate, which meets in the middle.
3 feet: Generally the smallest opening possible, for gates that only people will pass through. 4 feet: Standard opening that is good for people and most push mowers. 5 feet and 6 feet: Opening that fits most riding mowers. 10 feet: Opening that will fit most vehicles including cars, pickup trucks, SUVs, etc.
Here`s a really easy fix for sagging gates where the gate panel itself is sagging. Simply cut a piece of heavy gauge vinyl gate bracing and attach it with stainless steel self-tapping color-coded screws (available at Bryant Fence). For vinyl privacy gates wider than 5′, you may have to add a secondary diagonal brace.
Gate Care Guide

We suggest using a spirit-based oil or stain, which is absorbed into the wood and prevents rot by repelling water and moisture. If you contact your local paint shop, they are usually able to suggest a suitable product.

Fang manufactures a standard range of bar type gates to a maximum height of 3 meters and total width of 9 meters.
The hand of a gate is determined by the positions of the gate hinges when viewing a property from the outside. The hanging stile will be larger on the side that the hinges are positioned. If a pair of gates is required one will be a left hand gate and one will be a right hand gate.
Wood fences cost about $11 to $45 per linear foot for professional installation. The cost to install vinyl fences professionally is about $15 to $40 per linear foot. For DIY installation, wood is a less expensive material at $1 to $10 per linear foot, while vinyl costs about $10 to $30 per linear foot.
What is the Easiest Fence to Install Yourself? Did you know: with the right tools and planning, vinyl fences are among the easiest fences to install yourself! This is due to the fact that you install this material with essentially a no-dig design rather than needing to dig posts bases and fill them with cement.
Fencing is split up into three different events based on the weapon used. There`s the foil, epee, and sabre. They each have their own set of rules, and their roots can be traced back centuries.
Treated pine tends to be the most affordable, and also durable wood option. Cedar tends to be a pricier wood for fencing, and redwood and teak are at the top end. Vinyl, wrought iron, brick or stone fences are the most expensive.
Chain link fences are typically less expensive than wood fences. That`s because the material is less expensive and the labor hours required for installation are usually less. However, add-ons like gates, vinyl coating or fabric screens will all increase the total cost per foot of a chain link fence.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

AB LOUNGE 2….I need the 2 bars that hold the front part of the legs to the back part of the legs of the ab lounger together. How can I obtain these 2 parts? Please does anyone know?????
ANSWER : Fitness Quest Customer Support: 800-321-9236 Good luck.

Read Full Q/A … : Sport & Outdoor – Others

Square tent with 2 types gazebo poles, varenda, 2 side windows
ANSWER : The 2 longest of the poles go in an x over the center of the tent and the 2 shorter ones go arch to the sides. a picture very similar to your tent. If you go to image 2 it shows it with out the fly. now if you got 2 sets of 4 poles, 2 long and 2 short, and one set is all aluminum, then I would go with the aluminum set. It is less likely to collapse in high winds.

Read Full Q/A … : Sport & Outdoor – Others

Starter was removed, rebuilt and reinstalled. Looking for help fo correct wiring.

The starter has 1 small post and 2 large brass posts. 1 at the top and the other atthe bottom

There are 5 wires

– red battery cable
– red & yellow (Small post?)
– 2 red
– 1 orange

What could happen if the combinatio is not correct when I connect the battery?

I believe the serial # is LD64157

1998 Sey ray 3.0 L mercruser 135 HP


Attach the orange wire (FROM THE ALTERNATOR) to the stud on the starter solenoid that you connect the red battery cable.. Looking at the studded end of the solenoid, the small stud on the right side gets the yellow w/red stripe from the slave solenoid. The strapping coming out of the starter should be connected to one stud already. The empty large stud gets the two red and the orange wires.”

The Red/ Yellow wire goes to the Small stud, closest to the block,+ All the other wires go on the vacant Big stud.

Let us know if you want something more else please accept the solution.

Thank You for contacting

Read Full Q/A … : Sport & Outdoor – Others

Muzzleloader catastrophy!! I need HELP!!
ANSWER : Try pliers

Read Full Q/A … : Sport & Outdoor – Others

Need the wire diagram to rewire my Ariens lawnmover to bypass the safety switch. It is Ariens GT-19 model # 931026 Serial # 001463.
Can you help? It is an old Ariens mower but still runs good but now I need to bypass the safety switch in order to run it any longer. The local Ariens dealer said I need to go through the internet and get the wire diagram as they cannot give it to me directly. They told me I needed the wire diagram and the part involved in bypassing the safety switch. Hope this is all the information you need to help me.

Thank you. Roger Fielitz

ANSWER : Here is owner manual: the switch is behind the ignition, sometimes at the N position of gearshift, just look for a switch with one wire coming in & one going out (usually the same color); disconnect the two wires & jumper them together to bypass the switch. Looks like yours has one under the seat.

Read Full Q/A … : Sport & Outdoor – Others

2 problems with Tohatsu 9.8 4 stroke O/B engine. 1. The spring that controls the choke does not appear to be screwed in or connected. Should it be? Screw size? 2. When I squeeze to inject fuel, I notice that fuel is squirting from the side of the carburetor. I also found a very small yellow gasket at the bottom of the engine case – looks like something that fell out.
ANSWER : Hi vvs9,I see that you are having issues with your Tohatsu 9.8 4 Stroke O/B Engine.check this link, this is where you can get parts and the manual for machine, you mentioned that Fuel is squirting from the side of the carburetor and that there is a small gasket at the bottom of the engine case.Also that you mentioned there is a spring that seems to be unscrewed, I believe that is part of the Stop Switch. See Link below for more details.See this Link this is where you can check the manual exactly for the Model that you have.I hope that this helps.Thank you for choosing Fixya,mvincentc

Read Full Q/A … : Sport & Outdoor – Others

Water in the fuel tank of my Zodiac dinghy with Yamaha 2001 50 HP
ANSWER : I’d add a little dry gas to **** up any remaining water and give it a shot

Read Full Q/A … : Sport & Outdoor – Others