Sport & Outdoor – Others

Experienced athletes share their insights in answering this question:
Hello,

You can log onto www.iconservice.com for a pdf version of your manual for free.

Hope this helps

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

Insert the paper clip into the pinhole. As you insert the paper clip, press, and hold it down. As you hold the paper clip, have the second person flip the power switch back on. Once your machine`s screen lights up, you may remove the paper clip.
If the power has stopped working first replace the batteries. Make sure they are facing the right direction and that the connections are clean, and free of damage. If the console still wont work, you may want to get a power supply (if available for your machine) or new console.
After each workout, use a soft cloth and moderate amounts of a non-abrasive cleaner or water and wipe down the machine, paying particular attention to the console and walking belt. Avoid spraying anything directly on the console—instead, spray the cloth, and then use the cloth to wipe off the console.
You can find both on the serial number decal. It is usually silver and will be near the bottom of the product.
There should be a tiny hole on the side of your treadmill that is just large enough for a small wire to fit through. What is this? Once you locate it, get a paper clip and use it to press the reset button inside that keyhole.
Drive Belt Is Broken

One of the most common reasons for the elliptical not working is the drive belt. The drive belt is located inside of the elliptical and it wears down the more it`s used.

The treadmill may not function properly if the running belt is too loose or tight. You can try a quick belt adjustment to ease the stress on other parts of the treadmill. The running belt may also slip or malfunction if it needs lubrication.
At least once per month, you should give your elliptical a more thorough cleaning. Focus on the areas around the stride rails and rollers. Cleaning you should do every 6 months: Twice per year, after making sure your machine is powered off and unplugged, carefully remove the plastic cover and vacuum it internally.
Request maintenance annually by contacting NordicTrack by phone at 866-538-6117 or on the web at my.nordictrack.com. Claims can be made anytime by contacting NordicTrack directly at 866-538-6117 or on the web at my.nordictrack.com. You will speak with one of our fitness repair experts for troubleshooting.
In general, ellipticals offer incline levels anywhere from 0 to 20. The higher the incline, the more challenging your workout will be. When your elliptical is set to the higher levels, you`ll be engaging different lower body muscles than you would at the lower incline levels.
The frame and drive motor are warranted for a lifetime. Parts are warranted for five (5) years from the date of purchase. Labor is warranted for two (2) years from the date of purchase.
Simply push the “Start” button on your machine to begin a workout in manual mode.
Manual treadmills do not use electrical power to spin the running belt. Instead, a person powers the belt with their stride. Unlike an electric treadmill, with a motor that moves the belt at a consistent speed, a person is responsible for the machine`s speed.
Exercise bikes and elliptical machines can be powered by a battery or by an AC adapter. Some models offer you a choice, while other models have only one power option. Some exercise bikes use alkaline batteries to run the console, while others require a model-specific battery pack in place of the AC adapter.
If you`re going away on vacation or a long work trip, or if you`ve had to stop training due to injury or after giving birth, remember to unplug your fitness equipment and/or remove any batteries. It will be ready and waiting for you to start up your workouts again. To summarise: keep your elliptical at its best.
The beeping noise is a safety feature that all fitness equipment manufacturers include on their products. It alerts the user to a change during a workout that includes a change in the resistance level on an elliptical and the speed and/or incline on a treadmill.
To do this, press and hold the STOP and SPEED INCREASE buttons (this will be either an up arrow or a + (plus) symbol). While holding these buttons, insert the safety key onto the console. This will cause the machine to go into calibration mode. After this has occurred, you may let go of the buttons and the safety key.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Where do I find a Metal detector manual?
ANSWER : What make and model is it

Read Full Q/A … : Sport & Outdoor – Others

Pulley system “off track” inside main frame of 2005 boflex revolution
ANSWER : I had same problem. I fixed it by taking plastic sides off using a long phillips head screwdriver. Jay, you don’t have to take the sides off to fix your problem. The sides come off only to untangle and rewind cables on pulleys. Pull the cables all the way out. Have a helper pull out and keep holding out the tension knob This is shown at the bottom of page nine in the manual. With someone holding the tension knob out turn the large pully located beneith the tension knob CLOCKWISE! I screwed mine up by turning it counter-clockwise. This winds the handle to the top and if you start with all the cable pulled off the pully, the cable should then wind itself nicely back onto the pully. Once the handle is all the way up, with the round ball on the cable jammed up against the pully, then and only then let go of the tension knob and let it fall back into place. If the handle falls down a few inches repeat this proceedure but push lower pully a bit harder and try to turn tension knob, while it is pulled out, in the opposite direction and it will then click into place one notch tighter and should hold the black ball on the cable firmly against the pulley. Let me know if this was helpful.

Adam

Read Full Q/A … : Sport & Outdoor – Others

I have a mitchell riptide 80 spinning reel. I lost the screws and parts that hold the bail to the reel. I need a manual to show me the parts that I need to get. I also need the manual to show me exploded views so that I can clean and do maintainance on it.
ANSWER : Hello LVAmtrak,

Here is a link to the schematic and a site where you can purchase parts if necessary.

http://www.mikesreelrepair.com/schematics/displayimage.php?album=15&pos=270

Hope this helps.

Thanks,

Pat

Read Full Q/A … : Sport & Outdoor – Others

Need owners manual for 1995 Coleman/Fleetwood Niagara Pop Up Cam
ANSWER : This is a link to a pdf for the ’95 manual from the Coleman site

Coleman®Camping Trailers by Fleetwood Owners Manualhttp://www.colemantrailers.com/uploads/91731235052535.pdf

Read Full Q/A … : Sport & Outdoor – Others

I have a wildwood le 25bhbs and the only towing lights working are my signal lights. can’t get running lights or brake lights to work. I saw where it looked like the towing harness may have been pinched. So I repaired that, but, they still do not work. Any ideas? Is there a fuse somewhere I need to check? Do I need to hook the trailer up to my trailer hitch before they will work? Is there a wiring diagram or repair manual somewhere I can get? Any help would be greatly appreciated. Thank you.
ANSWER : There should be an inline fuse, check that first.

Read Full Q/A … : Sport & Outdoor – Others

Need help finding repair manual for 2001 mxz skidoo i need it free and i need to down load it
ANSWER : I know you want free but that may be hard to come by. Here is a repair manual for the really low price of $4.99.
http://www.tradebit.com/filedetail.php/2720238-2000-2001-ski-doo-factory-repair-manual
I can find no free download from a trusted site. I found some but the site is not trustworthy and I will not recommend a site unless I know it is safe. This is a small price to pay for a repair manual. I hope this is helpful. Not free but the best deal I can find.

Read Full Q/A … : Sport & Outdoor – Others

I bought a Nordic Track Walk Fit manual treadmill at a garage sale. It is missing the belt that goes around the ‘pulley wheel’ at the side. I thought it would be a matter of going to the Nordic Track website, but nothing comes up on their site when I enter the Walk Fit name. Where can I get a belt for this machine? The model number has been torn off but the date it was made was January 1995.
ANSWER : Hi this site will help you find what you are looking for..just click link and it will take you there hope this helps please rate thanks

http://www.treadmilldoctor.com/Products-Services2/nordictrack-treadmill-belt

good luck

Read Full Q/A … : Sport & Outdoor – Others