10′ X 10′ Sundome Tent 9160K101

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

The Coleman Sundome Tent is one of the more water resistant Coleman tents in the market. Without any additional waterproofing, the Sundome Tent can withstand up to 35 minutes of heavy rain, and a few hours of light to moderate rain.
A rainfly is the structure of fabric that protects your tent from the outside elements. Without it, there is no way to keep water out and keep the inside contents dry.
The answer really depends on the weather. It is necessary to use the provided rainfly if it starts to rain. This will prevent water from getting inside your tent and keep it dry if installed correctly. For dry and warm weather, it is recommended not to install the rainfly to allow for sufficient ventilation.
A fly refers to the outer layer of a tent or to a piece of material which is strung up using rope as a minimalist, stand-alone shelter. In basic terms, a fly is a tent without walls.
After your tent seams are completely secure and waterproof, they`ll remain that way for years. Usually, sealing your tent seams is a one-time, permanent fix. Unless you`re backpacking in harsh conditions for months on end, you`ll only have to reseal the seams once every 8-10 years.
Generally, it is possible for tents to lose their waterproofing but it might not be such a common case as good quality tents tend to last longer. They are usually made with better quality items which then makes them more durable and resilient.
Put a tarp or ground cloth under your tent.

Not only will this help protect your tent, it adds another layer between you and the wet ground. Just be sure the tarp is not bigger than the tent bottom. Any edge of the tarp sticking out can allow water to puddle around and under your tent.

Take the rain fly off the tent and hang it over a line, branch, or pole to dry. Open all the doors and vents to get as much airflow as possible. Wipe all the water off the tent floor and walls as you can with a microfiber towel. If possible, place the tent in the sun.
Your tent is not likely to blow away while you are inside it. The most likely modes of failure are broken poles and ripped fabric. How much wind a tent can stand is very dependent on the make and model. Some tents have the facility to use a double set of poles in the same sleeves, or extra poles, to improve stability.
You can lay it out on the ground under your tent, attach it to a tree, create a shelter to the side or even use it over your tent. Thanks to the waterproof and windproof nature, you get almost 360 protection.
Something unbeknownst to most people is that one can easily cause leakage by simply touching the inner walls of a tent on a rainy day. This is because when one touches the inner walls, the water droplets that gather lose their surface tension which causes them to seep through the tent fabric.
The most important thing to keep your tent dry in the rain is waterproofing it. While most tents are water-resistant, they probably aren`t waterproof. So, you should prepare for heavy downpours by preparing your tent with a waterproof spray like Nikwax`s Tent & Gear spray.
Vinyl coated polyester tarps are both waterproof and treated to protect against damage from the sun`s rays. Over time, sun exposure can dry a tarp and lead to cracking or fading. The UV treatment on a vinyl-coated tarp protects against this damage. This is a great choice for a rainfly.
Size of tarp for going over your tent like a rainfly

A tarp that needs to go over your tent needs to be about 4 feet longer than the base of your tent, both in length and width. You also need to make sure that your tarp is taut, free from wrinkles, and doesn`t sag.

Ridge-line lean-to tarp shelter

Tie off your fly line between two trees about 10 feet or 3m apart. Fold a quarter of the tarp over the line and secure the bottom with stakes. Put a fly line through each of the edge eyelets on the front, pull tight to create the ridge, and secure it with tent pegs or stakes.

A fly is a recommended accessory for all wall tents, providing a moisture barrier and protecting the canvas roof from UV rays. It also helps to keep the canvas roof clean and prevents sparks from burning holes in the canvas.
Ripped Screens, Unsealed Cracks, and Holes

Sometimes, even when screens cover our windows and doors, flies can find their way through tiny crevices to get to anything they`re sensing in your home. Screens can have rips, holes, and unsealed cracks between the frame and the screen.

Can it be used outdoors? DIY fly screens can be fitted inside or outside depending on whether your window/door opens inwards or outwards. If your window/door opens outwards the fly screen will need to be fitted on the inside. If your window/door opens inwards the fly screen will need to be fitted to the outside.
If you have bought a cheap tent, you expect some leaking in heavy rainfall. But when you`ve bought a high-quality tent and spent good money on it, you`re not going to be happy.
An inexpensive tarp is a smart investment when it comes to camping gear. You can pitch your tent on top of a tarp as an extra ground shield or you can use the tarp as an added layer of protection, placing it over your tent.
If you want to make your tent more waterproof, there is no better way than to give it a waterproof coating. There are spray-on waterproofing products you can buy that will give even the most inexpensive tent a strong waterproof shell. When you use these waterproofing sprays, make sure that you don`t skimp on them.
Typically, most tents come with a hydrostatic head value of 3000mm, and that would be a good gauge of what is enough to withstand rainfall in the UK. To be able to call a material water-resistant, it requires a minimum hydrostatic head value of 1000mm.
Make sure you bring any waterproof gear you have. A rain jacket and rain boots are essentials for camping in the rain and staying warm. If you don`t have any waterproof gear with you when it`s raining, there are some ways to improvise in order to keep yourself dry. You can make a poncho out of a trash bag if necessary.
Most tent sealing products need 24 hours to dry completely, so make sure you have a designated space free from debris where the tent can be spread out for a day to dry.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

I need new poles for Swiss Gear tent # SG33071F
ANSWER : Go to Home depot and buy a tube that fit the pole. Cut it into 5 or 6 inches for the broken areas. It costs me less than 2 dollars. Let me know how it turn out on yours.

Centre pole is failing to hold tent up in any real wind
ANSWER : TRY DRILLING A SMALL HOLE ON THE INNER POLE SLIGHTLY SMALLER THAN THE DIAMETER OF THE SCREW. U WILL WANT TO DRILL SMALL HOELS EVERY FEW INCHES(CM) SO THAT U WILL BE ABLE TO SET THE POLE AT VARIOUS HEIGHTS IN THE FUTURE.

HI!
I continually get code 90 (low/NO flow) from my 8111. I have disassembled, cleaned EVERYTHING, including the inlet port AT the pump (remind everybody to check this as stuff gets past the filter basket and will plug the pump inlet).

There is No air in the system and I get superb pressure at the outlet, yet I still get code 90. I again removed the flow sensor and put my ohm meter across the flow sensor terminals and activated the flapper and measured an open circuit. I used a heavier magnet to see if I could get make the internals of the sensor move to get an ohm reading, but I get nothing but an open circuit, ie: no measured resistance.

Can I simply bypass the defective flow sensor to trick the 8111 to think it has full flow without damaging the ‘brain’ of the system.?

Intex corp is useless at these questions. They have been out of stock on this sensor for months and are telling me “two weeks” for two months and now it’s “end of August” which I do not believe. Meanwhile I am making no chlorine while the 90 code is showing.

I love the 8111, this is the first problem I’ve had with it, and I’m frustrated that I can not get such an important part from them.

Thanks for listening!

ANSWER : Have you been able to find a solution to this problem. I am having the same issue.

How to put up a coleman tucana tent – Coleman 10' X 10' Sundome Tent 9160K101
ANSWER : Wow. They put more and more stuff on tents. I’ll give it a try based on a photo I found.First, peg the four corners down. This will help it from moving around.Find the two longest poles. These are your main supports and once you get them in, you can use the tent without the fancy rain cover (if you want to). They should run diagonally from the corner’s you pegged. Start at one corner and slide the poles through the sleeves in the top of the tent towards the opposite corner. The next two longest go from back to front. They do not cross diagonally. Slide these into their sleeves.Now the hardest part. Slide a pole into a peg hole or a pin (if your poles have holes in the bottom), then bend the pole and attach it to it’s corresponding corner. Just let the bent poles lay on the ground. Do the same with the others. It shouldn’t matter which poles go up first, but I would do the diagonals myself, then the side supports. Once these 4 poles are up, you’re in business.To attach the monster rain cover flip the whole thing over the top and figure out which side goes to the door. It looks like the lantern is on the right front. It looks like you should have two poles left. One may be the same size as the side support poles, or very close to it. This is the front door pole. The smallest pole is the side roof support.Slide the front door sleeve through it’s sleeve, then attach it to the pins or holes where the diagonally support poles are. They should have two pins in this spot, one for ea pole. Next, slide the side support pole side to side under the roof, but over the tent. It should have little pockets to put the pole into. Last, you’ll have to bungie the hooks to the little rings at each corner of the rain cover. Forget all the strings, unless you want to stake them out to stretch your tent a little. Hope this helped. Alley

Set up instructions for coleman tent – Coleman 10' X 10' Sundome Tent 9160K101
ANSWER : This may be the manual for you tent:

http://www.colemancanada.ca/pdfs/en/2000002058.pdf

Some other manuals for Coleman tent products are available here:

http://www.colemancanada.ca/manuals/tents.en.aspx

Sorry someone has not responded sooner.

How to stabalize four tent poles in an open area.
ANSWER : If you get four sturdy poles (not normal tent poles) then the best thing to do is to stake the four poles into the ground at a 60 degree angle with the top away from the tent and then use the tension created by the angle to support the tarp.

Tent I bought a tent the name on the outside says South Mountain.Not sure how to put up. It has two long rods & two short ones it looks like there are two rain gaurds also. There are no instrutions that came with this tent. Are there any pics that that show how to put up. I think the tent is around five years old.
ANSWER : It has to be similar to this (see link below). Most tents assemble in similar ways. Insert rods through the sleeves. Hook one side of the rod to one corner, arch the rods and hook the other side of the rod to the opposite corner. Repeat for the other rod.

http://www.coleman.com/coleman/images/pdf/2000000136.PDF