wners manual online. Any suggestions?
Bike
Experienced athletes share their insights in answering this question:
I have a Vital Fitness RB-350 as well. I suggest going to your local Radio Shack and purchasing an AC/DC Adaptor from them. The original Adaptor is 120V AC 60Hz Input and the Output is 6V DC at 500mA current. I don’t know how to get the Original Replacement Adaptor from Vital Fitness. I recently moved and could not find my adaptor, then finally found it. In the process I tried to find info on the co online, attempted to call their defunct cust. svc number, called the store where I purchased the Bike to no avail, BBB.com does not give any relevant info on them. Through reading online I see that they were part of a Spain group. Any way… I could not find any parts avail from their Spain Site. I guess if you contacted that firm, possibly they could give you the info you need to get an Original Replacement Adaptor. If you did not want to take my word for it, you could dis-assemble, partially, your unit, so that you could see the motor. On the motor, it should indicate it’s Voltage and Current demands. I have not disassembled mine, but that is the standard in the US… dunno if the US somehow allows china to skip on those standards or not. I don’t think so. Pardon my ignorance on this point. I imagine that they also have to abide by UL standards.
How to Identify and Resolve Common Issues ?
We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :
Loose cables within your exercise bike may be the cause of your display not working, or you may not have enough power going to the machine itself. Make sure to check that your power adapter is plugged in properly or replace the batteries.
Magnetic resistance bikes are exercise bikes that function on the principle of magnetism. These bikes use electricity and the flywheel to change the resistance level.
While the bike still functions as a stationary bike without being plugged in, the screen and accompanying interactive features won`t work without electricity. If you`re paying a monthly subscription to unlock all the interactivity, this is worth bearing in mind.
If it doesn`t turn on, the charger port`s wiring might be faulty and need replacing. Next, check the battery`s voltage. If the LED lights on the e-bike and its control panel don`t light up, the battery may not be charged. You can use a voltmeter to check the battery`s voltage.
Yes, you can still ride your -bike even when the battery is dead or absent. An ebike is just an upgraded standard bicycle with the regular pedals still on. Most people use the battery when looking to go faster or for assistance when going uphill. You will notice some things when riding the ebike with a flat/no battery.
Its battery can be charged both on or off the bike, while all of the battery types are easily removable, so you can charge it indoors if you like. An electric bike`s lithium ion battery does not have to be dead before it can be recharged, either. It has no `memory`, so most of them can be charged whenever you like.
You should typically expect a battery to last between 3 and 5 years if it is well maintained. (A lithium-ion battery will slowly lose its capacity over time, even if it`s not used.) Below are three things you can do to ensure you get the longest usage out of your electric bike battery.
Generally speaking, most electric bikes do not charge when you pedal. They need their batteries to be plugged into a power outlet to be powered. However, some models offer the possibility of charging while you pedal, although this is often very inefficient.
To clean your spin bike, first disconnect your equipment from any electrical outlets. Then, wet your entire bike with a damp sponge. Using WD-40 Specialist Bike Cleaner (yes, this can be used on exercise bikes, too!) spray the entire damp exterior surface of your equipment and work the product in with the sponge.
Light mineral/ silicone based lubricant or oil.
Many e-bike batteries do have an internal fuse, some even have two, one in the charging circuit and one on the supply side. A few have the latter accessible on the outside.
Level Of Wear And Tear
Magnetic resistance is nearly completely maintenance free because the only thing that`s changing is how powerful the magnet is that`s being utilized to prevent the spinning of the flywheel.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
I have a Vital Fitness Excersize bike model # RB-350. I have lost the power cord and am trying to find another that will fit, Can’t find an owners manual online. Any suggestions?
ANSWER : I have a Vital Fitness RB-350 as well. I suggest going to your local Radio Shack and purchasing an AC/DC Adaptor from them. The original Adaptor is 120V AC 60Hz Input and the Output is 6V DC at 500mA current. I don’t know how to get the Original Replacement Adaptor from Vital Fitness. I recently moved and could not find my adaptor, then finally found it. In the process I tried to find info on the co online, attempted to call their defunct cust. svc number, called the store where I purchased the Bike to no avail, BBB.com does not give any relevant info on them. Through reading online I see that they were part of a Spain group. Any way… I could not find any parts avail from their Spain Site. I guess if you contacted that firm, possibly they could give you the info you need to get an Original Replacement Adaptor. If you did not want to take my word for it, you could dis-assemble, partially, your unit, so that you could see the motor. On the motor, it should indicate it’s Voltage and Current demands. I have not disassembled mine, but that is the standard in the US… dunno if the US somehow allows china to skip on those standards or not. I don’t think so. Pardon my ignorance on this point. I imagine that they also have to abide by UL standards.
Read Full Q/A … : Bike
My swimming pool. I have just had my fifth IC 40 Intellichlor chlorine generator installed in 4 years at a cost of over $900 today. Each one has worked for no more than 8 months. The first three were replaces under three year warranty, the fourth by a factory rep and I bought the fifth today. The first three all failed with Flow Chk PCB error message. The fourth just stopped working on Sunday, no power or lights. A local Pentair warranty person, whom I paid a Service Call, unplugged the unit, opened the small power center cover, showed me the green light indicating that there was power, plugged in a new IC 40 which worked immediately (as did the other four). I asked if I should replace the power center and he said that it’s basically just a transformer and is working fine. We do get occasional power blips that make the clocks on microwaves, etc blink, but I thought that the power center essentially isolates the cell from these. I do have a Florida Power and Light surge protector on the electrical box that brings power into the house. I have now talked to the pool builder, two Pentair warranty repairmen and one factory rep. I am at a loss. They all tell me they have no idea why these units fail after less than a year. This last IC 40 was installed 3/24/2010, version 2.0 and now failed in less than 5 months. Should I replace the power center that the IC 40 plugs into. Any other suggestions. I have been told that this is the best chlorinator. I don’t want to keep replacing units. By the way, each unit had been spotless inside. I keep the water chemicals and salt levels at ideal levels. The units have never worked long enough to get dirty inside. The power center is connected to an Intellitouch control system outside with an indoor control panel. Last time I called Pentair North Carolina and got some smart alec tech person that had no suggestions. Please Help if you can.
ANSWER : I’ve had the same experiance. On my fifth one as well. Fail every year. No idea why.
Read Full Q/A … : Bike
We have model#38025 Toro 1800 snow blower that I am trying to fix. My husband accidentally got an electrical extension cord wrapped around the cylindrical curved inside and it’s jammed in pretty good. I have tried getting a manual online with no luck and we do not have a manual because the people who gave it to us forgot to give us the manual. I need to know how to get inside so that I can free the cord. Help please!
ANSWER : Here is the owner manual and the parts catalogue for your guide. You must have an Adobe Acrobat Reader installed in your pc to view thi file cause its pdf format.1. manuals/38025_operator_3327-516.pdf 2. manuals/38025_parts_3319-653.pdf
Read Full Q/A … : Bike
Need Manual for Vital Fitness Exercise Bike RB26S
ANSWER : I have a manual for this model. I can not tell you how to find one, I have looked all over the net for additional info. on this model and can’t find anything. Would be glad to scan and send you a copy if you still need it.
Read Full Q/A … : Bike
Yamaha blaster 2001
ANSWER : No fuel or no spark. Quick test: spray some starter fluid into air intake and try to start it. If it runs and then dies, you’ve got spark but no fuel. If the bike quit with no prior symptoms, check spark plug wire not knocked loose, fuel filter clogged. (You do have gas, right?)
Read Full Q/A … : Bike
Pullcord violently retracting on Craftsman lawnmower
ANSWER : Flywheel key is sheared-causing out of time ign.
Read Full Q/A … : Bike
Error message on recumbent bike
ANSWER : The problem might be the gearbox. I know because I have the same problem.
Keys fitness is out of business, but “The Treadmill Doctor” has purchased the inventory of parts for the bikes. They will help you troubleshoot, and have parts available if you need them. The number is 1-888-340-0482. Or, you can go to treadmilldoctor.com.
Keys fitness is out of business, but “The Treadmill Doctor” has purchased the inventory of parts for the bikes. They will help you troubleshoot, and have parts available if you need them. The number is 1-888-340-0482. Or, you can go to treadmilldoctor.com.
Read Full Q/A … : Bike
