thank you george in Barnesville Oh.
345 Electronic Pedometer

Experienced athletes share their insights in answering this question:
This is link is updated on Oct. 5, 2012

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

Press A until you get Time Display Hold C see Alarm Time & Press A Chime is ON when dashes appear above display. Chime is OFF when no dashes appear.
I finally found the manual here: & To turn alarm ON/OFF: Press SPLIT/RESET/SELECT & START/STOP/SET at the same time.
Press and hold the SPLIT/RESET button to view the Alarm Time. 3. To turn the Alarm ON or OFF, press the START/STOP button while holding down the SPLIT/RESET button (the bell icon in the upper right-hand corner of the display is on when the Alarm is turned ON).
All physical Time Timers require a battery to operate.
If the stopwatch requires cleaning use a lightly moistened cloth. If there are any stubborn stains or marks apply a mild soap to the area. Do not use strong chemicals such as gasoline, cleaning solvents, acetone, alcohol or insect repellents. Store your stopwatch in a dry place.
In manual timing, the clock is started and stopped by a person pressing a button. In fully automatic time, both starting and stopping are triggered automatically, by sensors.
The stopwatch can count up to a maximum of 99 hours, 59 minutes, 59 seconds in increments of 1/100 seconds. ₹1,000 – ₹5,000 – Stopwatches / Sports Gadgets: Sports, Fitness & Outdoors.
A stopwatch is a handheld timepiece designed to gauge the span of time which elapses between its activation and deactivation. In manual stopwatch time, the watch is started and stopped by a user pressing a button. However, in fully automatic timing, both starting and stopping are stimulated automatically, by sensors.
The College Board explicitly lists “separate timers of any type” as something that cannot be brought in. This means no stopwatches, no kitchen timers, and no hourglasses. An hourglass is not an acceptable timekeeping device for the SAT or ACT.
Change timer settings

Open your phone`s Clock app . Settings. Under “Timers”: Pick the ringtone that plays when the timer ends: Tap Timer sound.

Alarm beeping is a built-in warning that signals the power is fading, and that a new battery will be required soon. There are two options. Go ahead and put in fresh batteries all around. The beeping should stop when you`ve hit on the culprit.
Your alarm system`s keypad can be thought of as your command center, a headquarters for everything in your alarm system. The purpose of a keypad in an alarm system is to act as the central panel for your entire security system. You use the keypad to arm and disarm your alarm system.
Helps you organize and optimize the tasks that matter for you. Organise yourself and manage your time easily by setting timers. Clean Timer offers a simple, very easy to use interface with a large nice display.
Birth of the Stopwatch

In 1695, a British man called Samuel Watson invented the “Physician`s Pulse Watch”, at the request of surgeon John Floyer. The device was a pocket watch that could be stopped by operating a lever. It was able to measure to an accuracy of 1/5 second.

Apple Watch is so capable you`ll want to wear it all day long. So we made sure we gave it a battery that lasts all day, too. Our goal for battery life is 18 hours after an overnight charge, factoring in things like checking the time, receiving notifications, using apps, and doing a 60-minute workout.
Broken Stopwatch, which cannot be activated but can still be upgraded. Future purchases are also broken. Zhonya`s Hourglass.
On your Apple Watch, tap Settings > General > Reset > Erase All Content and Settings.
Start, stop, and reset the stopwatch

Record the final time: Tap the Stop button (the red button on the analog stopwatch). Reset the stopwatch: With the stopwatch stopped, tap the Reset button (the white button on the analog stopwatch).

99 Hours is 4 Days and 3 Hours.
16000 Hours is 666 Days and 16 Hours.
You can set alarms and use the timer and stopwatch on your smartwatch.
That means the stopwatch is extremely precise—it always gets the same measurement. However, the problem with your precise stopwatch is that it is not very accurate; you know that your dog runs a mile in exactly two minutes, not 2.999 minutes.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Need the wire diagram to rewire my Ariens lawnmover to bypass the safety switch. It is Ariens GT-19 model # 931026 Serial # 001463.
Can you help? It is an old Ariens mower but still runs good but now I need to bypass the safety switch in order to run it any longer. The local Ariens dealer said I need to go through the internet and get the wire diagram as they cannot give it to me directly. They told me I needed the wire diagram and the part involved in bypassing the safety switch. Hope this is all the information you need to help me.

Thank you. Roger Fielitz

ANSWER : Here is owner manual: the switch is behind the ignition, sometimes at the N position of gearshift, just look for a switch with one wire coming in & one going out (usually the same color); disconnect the two wires & jumper them together to bypass the switch. Looks like yours has one under the seat.

Read Full Q/A … : 345 Electronic Pedometer

ANSWER : Try a new plug sometimes a plug will not fire under compression. also adj the valves

Read Full Q/A … : 345 Electronic Pedometer

I have a multifunction sports watch that i bought from Big W, (no brand name)

By accident i set the watch to 24 hour time, originally it was set to 12 hour time, how do i set it back? ive tried every button combo including the button combo i used when i accidently set it on 24 hour time, the instructions only say how to set the time and date, it doesnt say how to toggle between 12 hour and 24 hour time, is there a generic way to toggle it on sparts watches? btw, holding the mode button in does nothing on my watch, no matter how long i hold it in for

ANSWER : Hi. How may buttons do you have, 3 or 4 buttons?if you have the 4 buttons, try this:You need to go through the time and date settings again. The 24 and 12hr format select is at the end of time/date adjustment.To set the time and date:-press the top-left button then right-top button to set the seconds, press bottom-left button to set hour then press top-right button to adjust hour, press bottom-left button to set the minute then press top-right button to adjust minute. To set date, press the bottom-left button then press top-right button to adjust month, press bottom-left button then top-right button to adjust day and finally press bottom-left button to set the time format then press top-right button to select 12hour format. Press top-left button when done.Since you have a generic sports watch, it is hard to write specific instructions to set the time format. If your watch has different ways of setting the time, just remember that the 12/24hour format is usually at the end of time and date adjustment.Let me know if you have questions. Good luck.

Read Full Q/A … : 345 Electronic Pedometer

I have a sportline 345 pedometer. I replaced the
ANSWER : I was looking for instructions for a different model when I found the instructions for the 347 here:

Read Full Q/A … : 345 Electronic Pedometer

Need a whole new set of poles for tent model number SG33071F. This is a great tent just need new poles caught in a wind storm
ANSWER : Me too! Did you ever find new poles?

Read Full Q/A … : 345 Electronic Pedometer

Im having problemswith my treadmill reebok TR3 (RE-11303). it appears that i need a new drivebelt. please coul you tell me wha drive belt i need, ow much it costs and where i can purchase one from? thank you
ANSWER : You may call Treadmill Doctor at 800-750-4766 toll free, 8am-5pm CST.

Read Full Q/A … : 345 Electronic Pedometer

Spark plug wire boot grounding out on coil, 96 outback 2.5 automatic, just put new spark plug wires, new spark plugs, and new coil on. ran great for two weeks, now spark is jumping out of boot at coil on one wire, put old coil back on and still does it in the same spot. replaced wires again, and still does it in the same spot. seems to do it only under a load. Is my new spark plug on that cylinder bad? Does the coil need some insulation under it? It is the coil that sits right on top of the motor. Any ideas? thanks.
ANSWER : Sparks are high voltage, and will always follow the path of least resistance. If you can visibly see a spark (whether in a lighted area, or in the dark), that means either that a plug wire (or coil wire) is open (non conductive), or your have a carbon track on the surface where the spark can be seen, but most likely you have BOTH problems!

If you have an ohmmeter, check the resistance of each wire involved, particularly spark plug wires … which means you must be able to connect to both ends of each wire at the same, and hopefully, FLEX those wires, to be sure they don’t have a break inside that is intermittent (comes and goes)!

Read Full Q/A … : 345 Electronic Pedometer