out after fired. why is this?
Sport & Outdoor – Others
Experienced athletes share their insights in answering this question:
Sounds like it’s actually made for 22 shorts, only, and the long and long rifle are extending past the chamber and wedging in the slightly smaller bore beyond the chamber after firing. (the casing expands slightly…)
How to Identify and Resolve Common Issues ?
We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :
The Remington Model 12 was a slide-action rifle designed by John Pedersen and produced by the Remington Arms Company from 1909 to 1936.
Magazines were tubular, and could hold 14, 11 or 10 short, long or long rifle cartridges, respectively—capacities that were increased later in the guns run by one. The rifle fired all three without fail, a versatility that likey helps maintain its popularity.
** During almost all hunting seasons, it is illegal to have more than three shells in your shotgun. A plug, (guns often come with it in), is inserted into the magazine to prevent the gun from holding more than three but most can hold more than that without the plug in.
THE MODEL 870
And with more than 11,000,000 sold since its introduction in 1950, it`s become the best-selling shotgun of all time.
REMINGTON MODEL 12 – $849.99.
22 Long and . 22 Long Rifle cartridges. Ammunition is supplied by a tubular magazine under the barrel which holds 15-22 rounds depending on the cartridge used.
Grades Offered:
12A Standard Grade, 12B Gallery Special, 12C Target, 12C N.R.A. Target Grades.
With a 15+1 capacity, German Beechwood stock and great accuracy, the Rossi Gallery 22 pump-action . 22LR rimfire is perfect for plinking fun and learning to shoot. Few things in the shooting world are more fun than a . 22 pump.
REMINGTON DATES OF MANUFACTURE
Remington made use of a two or three letter Firearms Identification Code that can be located on the left side of the barrel, just ahead of the frame. The first letter of the code identifes the month, the other letter(s) identify the year.
Hornady 12 Gauge 2-3/4 Inch Shell, Slug, 1575 Velocity, Shot At 25 Feet. A shotgun bullet or a slug is a solid piece of lead. It makes them the most powerful ammunition for 12-gauge shotguns. There is no spread, making them difficult to place properly.
The 12 gauge is so popular because it`s powerful enough to hunt most species of game, but the recoil of a 12 gauge is much more manageable than the 10 gauge. A 12 gauge shell also has advantage over the smaller gauges because it has a shorter shot column.
Whatever you want to do, you`ll be able to find an effective load in either 12 or 20 gauge, which is the real beauty of shotguns. But, generally speaking, the larger 12 gauge offers more power and versatility while the smaller 20 gauge offers better shootability.
From August 1912 until first discontinued by Winchester in May 1964, nearly two million Model 12 shotguns were produced in various grades and barrel lengths.
The Remington Model 870 shotgun is the best-selling gun in Remington history. Introduced in 1950 to replace the Model 31, it has been produced in a vast number of variants and is still in production. Versions have been made for military and law enforcement, as well as for the traditional sporting market.
As mentioned earlier, Remington guns are well worth more now than they ever have been in the past. Whether you`re a collector or a shooter, these guns are sure to hold their value for many years to come.
While the 22lr is accurate and easy to shoot it does fail to penetrate adequately. The 9mm, on the other hand, was specifically designed as a combat cartridge. As the standard round for the US Military and NATO, it is much larger and powerful than the 22lr.
The common . 22 LR is effective to 150 yd (140 m), though practical ranges tend to be less. At 500 yards, it still retains half of its muzzle velocity of +/- 1000 fps, but only one quarter of its muzzle energy. Example: a 40 grain bullet from a 18inch barrel has 140 ft-lbs — twice the lethal standard.
The Remington Model 597, chambered in . 22 Long Rifle is one of the most accessible semi-automatic rifles out there. The ammo is relatively cheap easy to get hold of.
Depending on the choke, buckshot loads in a 12-gauge shotgun can be effective against a human adversary out to 60 or 70 meters. However, in a cylinder-bore shotgun, the effective range of, for example, #00 buckshot is 40–50 meters. Beyond that range, the pattern is so wide that a reliable hit is not guaranteed.
We have found that a minimum of 100 rounds should be fired using ammunition that reliably cycles the action before the shotgun can be considered to be “broken in”.
The company saw a growing market with bird hunters and clay target shooters, so in 1873 it started making the Remington-Whitmore double-barrel shotgun. This was the first shotgun made by Remington.
One of the distinguishing features of the X-Caliber is its ability to fire 12 different calibers, thanks to the eight steel caliber adapters it arrives with. In effect, the 12-gauge barrel can be adapted to use . 380, 9mm, .
The Henry Pump Octagon, available in calibers . 22LR or . 22 Magnum, is one gun that is built for fun.
22 long rifle was developed by the J. Stevens Arms & Tool Company in 1887. It was originally the . 22 long case with 5 grains of black powder and a 40 grain bullet.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Mar 12, 2010 – Could it be the check valve? I took it off and the flap appears to be working correctly. This well has been here a long time. Never given me any problems. I do have galvenized couplers on the discharge and intake sides. Old. Could these be leaking even though they show no sign of water? The discharge is able to hold 30 pounds easily overnight. I do not hear any vacuum in the intake when I take it off. Could the pipe to the well have a leak? I know I would have to insert a sleeve bnut I do not want to go through the hassle if I do not have to. I had put on a brand new pump from the hardware store that did the same thing so I think that would elliminate the pump as being the problem.
Mar 12, 2010 – I have a 3/4hp flotec convertible jet pump. It is able to hold 30lbs pressure on the discharge side as the primie easily for 24 hours. It is not able to pull water from the well whcih has been here for years. i disconnected it for the winter and rehooked it up. The galvanized couplers on the discharge and pump side are old but do not appear to be leakeing as I taped them well. The check valve seems to be functioning well as I took it off and the flap works correctly. The well is not pulling watrer. there does not appear to be a vacuum on the check vale when I losen it. could the check valve be bad? I am aware I might have to resleeve the well, but do not want to hassle with this if I do not have to. I want to eliminate everything else first. i put another brand new pump on it to see if it was that. That partiuclar pump which was the same thng did not work either.
Mar 12, 2010 – I have a 3/4hp flotec convertible jet pump. It is able to hold 30lbs pressure on the discharge side as the primie easily for 24 hours. It is not able to pull water from the well whcih has been here for years. i disconnected it for the winter and rehooked it up. The galvanized couplers on the discharge and pump side are old but do not appear to be leakeing as I taped them well. The check valve seems to be functioning well as I took it off and the flap works correctly. The well is not pulling watrer. there does not appear to be a vacuum on the check vale when I losen it. could the check valve be bad? I am aware I might have to resleeve the well, but do not want to hassle with this if I do not have to. I want to eliminate everything else first. i put another brand new pump on it to see if it was that. That partiuclar pump which was the same thng did not work either.
See less
ANSWER : Your well has gone dry it seems. It has happened to my before. At first the new pump I purchased that did not pump I took back for exchange and still no water. I finally gave in and called the well experts and I was told the well was dried up
Read Full Q/A … : Sport & Outdoor – Others
HI!
I continually get code 90 (low/NO flow) from my 8111. I have disassembled, cleaned EVERYTHING, including the inlet port AT the pump (remind everybody to check this as stuff gets past the filter basket and will plug the pump inlet).
I continually get code 90 (low/NO flow) from my 8111. I have disassembled, cleaned EVERYTHING, including the inlet port AT the pump (remind everybody to check this as stuff gets past the filter basket and will plug the pump inlet).
There is No air in the system and I get superb pressure at the outlet, yet I still get code 90. I again removed the flow sensor and put my ohm meter across the flow sensor terminals and activated the flapper and measured an open circuit. I used a heavier magnet to see if I could get make the internals of the sensor move to get an ohm reading, but I get nothing but an open circuit, ie: no measured resistance.
Can I simply bypass the defective flow sensor to trick the 8111 to think it has full flow without damaging the ‘brain’ of the system.?
Intex corp is useless at these questions. They have been out of stock on this sensor for months and are telling me “two weeks” for two months and now it’s “end of August” which I do not believe. Meanwhile I am making no chlorine while the 90 code is showing.
I love the 8111, this is the first problem I’ve had with it, and I’m frustrated that I can not get such an important part from them.
Thanks for listening!
ANSWER : Have you been able to find a solution to this problem. I am having the same issue.
Read Full Q/A … : Sport & Outdoor – Others
I have a 2001 Yamaha XL700Z Waverunner. The compression on both cylinders is about 120, it starts and runs fine – dry. Won’t quite idle, but I can start it and rev it up fine (for a short period, of course). However, as soon as it gets in the water, it will barely run – it will start and sputter and you cannot get it to run more than a few seconds or rev up. Take it back out, let it dry, starts & revs fine. It is not getting any water in the casing that I can tell, its almost as if water is getting something wet through the cooling system that I cannot see?
ANSWER : Try cleaning the carbs and the fuel lines, filter
Read Full Q/A … : Sport & Outdoor – Others
I have a vintage model winchester 24 12 gauge SxS
ANSWER : I spent that past 20min or so runnin through the normal places I normally find Owners manuals for older guns with no luck.The only place i was able to find one is on ebay. Gun Broker.com is also another place they are sellin them.Here is a LINK to the ebay Auction.
Read Full Q/A … : Sport & Outdoor – Others
On my model 770 in 300 mag. new right out of the box, cleaned in and oiled it but the bolt action was still sticky and after firing a box and a half though it it still will not eject the spent casing and I have to turn the gun on it’s side and let it drop out on it’s own. I have even called Remington’s repair shop in Or. and they can’t guarantee it will work as he said it was nothing but a cheap rifle from Remington. I will be sending to Remington’s repair shop and if they can not repair it what rights do I have to get my money back? As I don’t feel that I should keep on having to pay for shipping all the time for there poorly made rifle.
ANSWER : I am not sure about that in your location, meaning laws depend and vary from location to location.
But with your problem I guess a simple look on the paper works or the invoices or something and trying to find the “fine prints” or statements regarding about return and exchange policies, or their warranty coverage. Should you find them and it states coverage “on your side”, well I may suggest you do have a right to claim a refund or a new stock, but if it states otherwise,and of course you have already signed the paper works, I think you may not be eligible for any refund or claim whatsoever.
But with your problem I guess a simple look on the paper works or the invoices or something and trying to find the “fine prints” or statements regarding about return and exchange policies, or their warranty coverage. Should you find them and it states coverage “on your side”, well I may suggest you do have a right to claim a refund or a new stock, but if it states otherwise,and of course you have already signed the paper works, I think you may not be eligible for any refund or claim whatsoever.
It is always stated in the paper works you sign when purchasing items,(this is what happens here in my location), so its important to read them well, specially the rule “read between the lines” comes into place, specially the “fine print” or the text or sentences written in a very small, often unreadable with your eyes not squinting.
But a good talk between them and you could always results in a good compromise or agreement both beneficial for you and them.
Read Full Q/A … : Sport & Outdoor – Others
On my model 770 in 300 mag. new right out of the box, cleaned in and oiled it but the bolt action was still sticky and after firing a box and a half though it it still will not eject the spent casing and I have to turn the gun on it’s side and let it drop out on it’s own. I have even called Remington’s repair shop in Or. and they can’t guarantee it will work as he said it was nothing but a cheap rifle from Remington. I will be sending to Remington’s repair shop and if they can not repair it what rights do I have to get my money back? As I don’t feel that I should keep on having to pay for shipping all the time for there poorly made rifle.
ANSWER : I am not sure what u are asking here if anything??
Read Full Q/A … : Sport & Outdoor – Others
Mosberg 12 ga pump. Once you load then shoot it drops shells.
ANSWER : Thewre is a U shaped silver piece that is supposed to lift the shell up to the chamber so it can be pushed in. Is it missing or damaged?
Read Full Q/A … : Sport & Outdoor – Others
