Sport & Outdoor – Others
How to Identify and Resolve Common Issues ?
We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :
Raising a dome tent is easy, and you just need to take the each pole and fasten it to the eyelets at each corner. As you insert the opposite side of each pole you will have to bend them (which may require a bit of force) and the tent will start to rise and take shape.
The easiest tents to set up by yourself are: Core 9 Person Instant Cabin Tent (Best Overall Tent) Teton Sports Instant 1/2 Person Tent (Best For Backpacking) Coleman Instant Cabin Tent (4/6/10 Person) (Reliable Instant Cabin Tent)
6-person tent measures 10 ft. x 10 ft. with a 6 ft. center height.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Centre pole is failing to hold tent up in any real wind
TRY DRILLING A SMALL HOLE ON THE INNER POLE SLIGHTLY SMALLER THAN THE DIAMETER OF THE SCREW. U WILL WANT TO DRILL SMALL HOELS EVERY FEW INCHES(CM) SO THAT U WILL BE ABLE TO SET THE POLE AT VARIOUS HEIGHTS IN THE FUTURE.
Square tent with 2 types gazebo poles, varenda, 2 side windows
The 2 longest of the poles go in an x over the center of the tent and the 2 shorter ones go arch to the sides. http://www.wenzelco.com/details.aspx?NavID=412shows a picture very similar to your tent. If you go to image 2 it shows it with out the fly. now if you got 2 sets of 4 poles, 2 long and 2 short, and one set is all aluminum, then I would go with the aluminum set. It is less likely to collapse in high winds.
Instruction to put up a Coleman Rock Springs 4 Tent please?
Wow, thats a monster tent. I’ll get you most of the way there, but I may miss a thing or twoLay it down, stretch it out and peg it. That will save you a ton of time.Next, find the four longest poles. These are the supports. Two on each side of the door, crossing diagonally to the rear. Put one end of the poles in the holes and bend until you can get the other end in. These poles should slide through sleeves in the tent. Once these are up, the rest are “extras.” The tent has hooks to hold the poles to the tent. You have two poles of equal lengths for the side windows. Again, route them thru a sleeve, bending them into the holes on either side of the windows. I can’t tell, but it looks like you have a pole system for the front door too. Somehow these poles go next to the main support poles and meet up under the rain cover.Next, lay the rain cover on top of the tent. It should connect by bungies to the bottom of the pole support holes. There might be a pole or two under the rain cover, but above the tent for support. If so. look for a small pouch that a pole could slide into on the bottom side of the rain cover. You’ll run the pole from the pouch to another pouch (all under the rain cover).Don’t worry about strings or extra poles. These are for high wind. Pegging the tent down is good enough.Good luck
Ripped outwell tent
Log onto http://www.imagescotland.com/scottishmountaingear-home.asp
this is outwell’s recommended repairer!
ps. putting the pins in is very tricky – needs strength and patience!
Swiss Gear Tent – Broken Poles SG33071F
Take a look on amazon for replacement. here: Amazon com tent poles. I hope this was helpful. Cheers
I need new poles for Swiss Gear tent # SG33071F
Go to Home depot and buy a tube that fit the pole. Cut it into 5 or 6 inches for the broken areas. It costs me less than 2 dollars. Let me know how it turn out on yours.
Tent I bought a tent the name on the outside says South Mountain.Not sure how to put up. It has two long rods & two short ones it looks like there are two rain gaurds also. There are no instrutions that came with this tent. Are there any pics that that show how to put up. I think the tent is around five years old.
It has to be similar to this (see link below). Most tents assemble in similar ways. Insert rods through the sleeves. Hook one side of the rod to one corner, arch the rods and hook the other side of the rod to the opposite corner. Repeat for the other rod.