ook the card out and downloaded its photos direct on my laptop. I now find that on re-inserting the card in the camera , the camera screen say “card not initialised” and it won’t work. How do I remedy this, please?
Rod Repair Kit

Experienced athletes share their insights in answering this question:
The message is trying to tell you that you need to format the card. The owners manual will have “how to format” information for your camera.If you cannot format the card it could be the card or the camera. The only way to know for sure is to use another card and then check if you still have the same problem…

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

Connect the camera to the computer via USB and then turn the camera on (aConnecting the Camera and Computer). Select the camera in the app where it will be used as a webcam.
Turn the camera off. Use the supplied USB cable to connect the camera and computer. Be sure the connectors are in the correct orientation and fully inserted. Connect the camera directly to the computer; do not use a USB hub or keyboard.
Connecting the Camera

Connect the camera and computer using the supplied USB cable. Start the computer. Turn the camera off and connect the supplied USB cable as shown, making sure the connectors are fully inserted. The camera is equipped with a Micro USB (Micro-B) USB 2.0 connector.

Only turn the flash on if you`re shooting in low-light conditions and you`re trying to capture something 8–36 feet (2.4–11.0 m) in front of you. If you don`t want to use flash, simply ignore this button and leave it in the off position. Some Fujifilm disposable cameras don`t have a built-in flash.
Connecting the Camera

Turn the camera off and connect a third-party USB 3.0 or 2.0 cable (either type can be used), making sure the connectors are fully inserted. Use a USB 3.0 cable for higher speeds with computers that support USB 3.0. Turn the camera on. Copy pictures to your computer.

General Motors is recalling over 95,000 SUVs, including the 2020 and 2021 Cadillac XT5 and XT6 and GMC Acadia, because their surround view cameras might not work. The problem is caused by a faulty cable that may cause the backup camera`s image to display intermittently or not at all.
Remove the memory card from your camera or phone. Alternatively, the device may have come with a USB transfer cable. Using the cable method, you can leave the card in your camera and tether it to the laptop or PC. Plug one end into the device`s data port, and the other into the computer`s USB slot.
Enable Wi-Fi. Press the button to which WIRELESS COMMUNICATION has been assigned or select WIRELESS COMMUNICATION in the camera menus.
The new Fujifilm XApp will be released on May 25th for both iOS and Android. Earlier this week, Fujifilm offered press an early glimpse at the software.
Daytime outdoor and daytime cloudy shots will be fine. Shots at twilight, at night, in a bar/club/venue/building, you`ll want to use the flash. Make sure to get the camera developed at a location that gives you back your negatives.
instax SHARE. This app is FUJIFILM official application that can be used to print images from smartphones to instax SHARE (SP-1/SP-2/SP-3)smartphone printer.
Use Micro SD card slots in Smartphone

Connect the camera memory card to your phone using the card reader. Copy and paste the images from the camera memory card to the micro SD card in your smartphone. You can invest in multiple micro SD cards if you prefer to use this method to take photo backup while traveling.

The mechanical shutter allows you up to 1/8000th second shutter speeds. You can go faster, however, by selecting the electronic shutter which enables up to 20FPS and is rated at shutter speeds up to 1/180,000th of a second.
Available Safety Features

Surround-view parking camera system. Rear cross-traffic alert. Adaptive cruise control. Blind-spot monitoring.

There is dirt on the memory card contacts: Clean the contacts with a soft, dry cloth. The memory card is damaged: Insert a new memory card ( Inserting Batteries and Memory Cards). The battery is exhausted: Charge the battery or insert a fully-charged spare battery ( Charging the Battery).
How do I connect my camera to my phone wirelessly? Download the camera`s app from the App Store or Google Play Store, sign up for an account, and tap `add device`. Pair the camera via a QR code or by connecting to it as a wireless network.
Highlight Bluetooth and press MENU/OK. Highlight PAIRING and press MENU/OK. Launch the app on the smartphone and pair the smartphone with the camera. When pairing is complete, the camera and smartphone will automatically connect via Bluetooth.
If you have one compatible with an xD picture card, you can connect it to your smartphone using an adapter. The xD card will read just like any other SD card on your device.
For SD card, it is recommended to choose FAT32 or exFAT format for different devices compatibility. If you need support for bigger files, exFAT will be better.
DCIM is short for “Digital Camera Images.” DCIM is a folder that is automatically created on the SD card by your camera. The camera use the DCIM folder to store the videos and photos captured by the camera.
Types of SD Cards

Hardware devices that host the memory cards are backward-compatible meaning you can use older standard memory cards in devices that support newer standards like SDXC. For example, an SDXC-compatible device can use SDXC, SDHC, and SD standard cards.

Pictures can be stored in the camera`s internal memory or on optional SD and SDHC memory cards.
Only turn the flash on if you`re shooting in low-light conditions and you`re trying to capture something 8–36 feet (2.4–11.0 m) in front of you. If you don`t want to use flash, simply ignore this button and leave it in the off position. Some Fujifilm disposable cameras don`t have a built-in flash.
Overall, the Fujifilm X100V is a joy to use because of its compact size, retro design, and excellent performance. If you don`t mind the fixed lens, this is one of the best beginner cameras available.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Unable to read camera on laptop to load pics
ANSWER : Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won’t run down your camera’s batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system’s drag&drop facility to copy pictures from the card to the computer’s hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa ( http://picasa.google.com ).

Read Full Q/A … : Rod Repair Kit

Hi I have a fujifilm f470 finepix camera. One
Is it just the live view from the lens that you can’t see ( totally blank screen), or are the icons visible?
If it still shows the icons but no live view then I suspect the shutter mechanism is stuck over the lens inside the camera.
Have a look at the lens and see if you can see the inner lens? You may have to adjust the zoom to bring the inner lens up to the end of the lens barrel.
If it is stuck then it will require removing and inspecting / cleaning.

Read Full Q/A … : Rod Repair Kit

I have a Fujifilm A850 camera.
The screen says ‘protected card’.
How do I unlock said card, so my camera works again?
ANSWER : SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

Read Full Q/A … : Rod Repair Kit

My SD card (FujiFilm – 2GB) has decided to make itself ‘write-protected’ after I transfered all of the photos to my pc & then deleted them from the card. Now it wont let me use it in my camera like it did previously. any ideas on how to UN Write protect the SD card?
ANSWER : SD (and SDHC) cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

Read Full Q/A … : Rod Repair Kit

I am trying to get the pictures from my camera finepix j210
ANSWER : Depending on computer, some computers will not be compatible with different software. Try finding a different driver for that particular software.

Read Full Q/A … : Rod Repair Kit

I have purchased three 750-watt power inverters in the last three weeks. They have all failed to work on the second or third use. The first two were the same brand. I replaced an old one that ran for several years. I am using it to run a 4.7 amp 120-volt vacuum cleaner motor that pumps up my air dock. I have it connected directly with marine cable to one of the boat batteries. The battery outputs about 12.8 volts DC. The fuses don?t blow, just No Output. I am using a three-wire 120-volt extension cord and am, wired neutral, hot and ground to the AC motor vial an on/off switch. The motor works fine when I run house power with an extension cord from the dock next to me. Could I be, just unlucky with new inverters and need to buy a forth one?
ANSWER : The problem may be that the inverter is undersized for the load. Is the 4.7 Amp rating the motor peak draw or the nominal one. What I mean is that it takes many times more power to start start the motor than when the motor is running. Typically it is 3 to 7 times more amps to start the motor than when it is running. It could be that starting the vacumm cleaner is stressing the inverter and it is causing it to fail prematurely. If you can find out the locked rotor current draw of the motor, the that would be the mininum size of the inverter.

Also, the type of inverter will make a difference on how the motor operates. A modified sine wave will make the motor run hotter than a pure sine wave inverter. Hope this helps.

Read Full Q/A … : Rod Repair Kit

Hiya I have a fujifilm e-900 I have used the camera less than 20 times. The last time I used it I had no problems at all. I had left it sitting in it’s case for 6 months. Now when I try and us it I get the hand with lightning bolt on the lcd. Which I assume means the battery encasement is open. It isn’t open. The camera turns on no problem then when I try and use any function it shuts down. How do I fix this?
ANSWER : The hand with the lightning bolt icon usually means the camera is telling you that there is not enough light and you need to pop the flash up before you take a picture.
If you haven’t used the camera for a while have you tried fresh batteries or charged the 2 re chargeable AA’s that came with the camera?

Read Full Q/A … : Rod Repair Kit