Sport & Outdoor – Others
We received a Huffy Pro Shot Portable Basketball Goal as a gift, but without the instructions of how to put it together. Where can we find those so we can put it together?
How to Identify and Resolve Common Issues ?
We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :
How many bags of sand does it take to fill a basketball goal base? Basketball goal systems with a 35 gallon base are widely used in portable basketball goals. If your base is 35 gallons, you should buy 10 50-pound bags from a home-supply store.
Simply place a level on the sides of the pole to check it for levelness. You can loosen the top nuts slightly and adjust the bottom nuts to move the system up or down on the corner which needs leveling. When the system is level, simply tighten all nuts against the pole system.
You will also need a drill in order to drill holes into the pole for the bolts that will hold the hoop in place. Additionally, you will need a wrench to tighten the bolts and a level to make sure that the hoop is installed correctly. With these tools, you should be able to successfully assemble a basketball hoop.
In basketball, a four-point play is the rare occasion when an offensive player shoots and makes a three-point field goal while simultaneously being fouled by a defensive player, resulting in a shooting foul and one free throw attempt, or a two-point field goal and is intentionally or flagrantly fouled on the shot and …
To repair a broken portable basketball hoop base, heat is widely regarded as the best method. Then, in order to repair the crack, sand the base and then flame it in the crack spot. The patch layer is built to withstand sandbars or other interferences in the water.
Sand is more expensive and more difficult to put in the base, but it will not evaporate like water. Water is significantly easier and cheaper than filling with sand. Water can freeze and if you live in a cold region, the water may possibly crack your base.
Ways to secure the basketball goal include: filling the base with water, sand, base gel or using a weighted base anchor system. Adding water to the base is as simple as hooking a hose to the base hole. This is a cheaper and easier option than sand.
The better long-term option is to dig the pole out from the ground. This is a labor-intensive task that involves digging 2.5 to 3 feet under the surface to pull the pole from the ground without leaving behind anything. Next, they`ll remove the concrete surrounding the pole with either a sledgehammer or jackhammer.
The best way to weigh down a basketball hoop is to use sandbags or water-filled jugs. This will keep the hoop from tipping over and will also provide stability when shooting. It is critical to select the correct way to fill the base of your portable basketball hoop.
The better long-term option is to dig the pole out from the ground. This is a labor-intensive task that involves digging 2.5 to 3 feet under the surface to pull the pole from the ground without leaving behind anything. Next, they`ll remove the concrete surrounding the pole with either a sledgehammer or jackhammer.
The best way to weigh down a basketball hoop is to use sandbags or water-filled jugs. This will keep the hoop from tipping over and will also provide stability when shooting. It is critical to select the correct way to fill the base of your portable basketball hoop.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Installation manual for model Portable Basketball hoop
Model AA59594P
Model AA59594P
ANSWER : Try this: http://www.lifetime.com/customer-care/manuals/basketball/portable/1221.pdf
Read Full Q/A … : Sport & Outdoor – Others
My daughter has a sweet pea scooter that had been blowing fuses and the motor got hot. Im sure the motor is shot. but my question is can anyone tell me if the motor would be the only thing I need to c
ANSWER : Find out whether it is 6 volts or 12 volts and there should be two wires that feed the motor either cut or splice and attach another set of wires with fuse in the line (simular to jumper cables) raise the back tire so it does not touch the ground and place jump wires to the negative and positive of the battery.If the motor moves in either direction without blowing the fuse the motor is good if not then its bad. Uses the same amperage fuse
Read Full Q/A … : Sport & Outdoor – Others
Need manual for assembly of Lifetime portable basketball goal model No. CB14500
ANSWER : Find the CB14500 manual here, use the last one in the list (Reebok / Lifetime XL Basketball system)
Read Full Q/A … : Sport & Outdoor – Others
Need the wire diagram to rewire my Ariens lawnmover to bypass the safety switch. It is Ariens GT-19 model # 931026 Serial # 001463.
Can you help? It is an old Ariens mower but still runs good but now I need to bypass the safety switch in order to run it any longer. The local Ariens dealer said I need to go through the internet and get the wire diagram as they cannot give it to me directly. They told me I needed the wire diagram and the part involved in bypassing the safety switch. Hope this is all the information you need to help me.
Can you help? It is an old Ariens mower but still runs good but now I need to bypass the safety switch in order to run it any longer. The local Ariens dealer said I need to go through the internet and get the wire diagram as they cannot give it to me directly. They told me I needed the wire diagram and the part involved in bypassing the safety switch. Hope this is all the information you need to help me.
Thank you. Roger Fielitz
ANSWER : Here is owner manual:http://apache.ariens.com/manuals/030305C.pdfusually the switch is behind the ignition, sometimes at the N position of gearshift, just look for a switch with one wire coming in & one going out (usually the same color); disconnect the two wires & jumper them together to bypass the switch. Looks like yours has one under the seat.
Read Full Q/A … : Sport & Outdoor – Others
Too much hanging on the rim and rough play – backboard supports are bent – need to buy new top supports and bolts etc…, where do I purchase? Lifetime Elite In-Ground basketball goal purchased at Dicks.
ANSWER : Here’s a phone number of either someone who sells or makes this product. Hope this helps.
1-866-308-5484
1-866-308-5484
If not, take off the supports, straighten them, and scab weld on some reinforcing rods to keep them from bending.
Read Full Q/A … : Sport & Outdoor – Others
The instructions I got are not exactly for the tent in the bag, so I need to find out the specific instructions for my tent rther than the generic instructions it came with.
ANSWER : Search on the internet for the manufacturer’s name, and the tent model. Most have instruction sheets downloadable from their websites. If that doesn’t work, and they can’t help you by email, then try to find a scout troop or outdoors club in your area, who may be able to help you find instructions or even someone with a similar tent.
Read Full Q/A … : Sport & Outdoor – Others
Can u give me instructions to make stuff out of wood.
ANSWER : I know we’re not supposed to do links, but this is alot of info.
good luck.
http://www.ldsphilanthropies.org/humanitarian-services/patterns/animals-and-flying-things.pdf
good luck.
http://www.ldsphilanthropies.org/humanitarian-services/patterns/animals-and-flying-things.pdf
Read Full Q/A … : Sport & Outdoor – Others
