Sport & Outdoor – Others

I need assembly instruction.

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

Though many campers will orient a tent with the smaller side facing the wind for reduced resistance, it`s more important to place the side that has the strongest pole structure facing the wind. If you`re camping in a hot climate, orient a door toward the wind for cooling.
The actual size of a 6-person tent may measure 305cm x 305cm in floor area and 210cm or more in height – plenty of room to accommodate basketball players.
6-person tent measures 10 ft. x 10 ft. with a 6 ft. center height.
Even though dome tents look difficult to set up alone, they are actually one of the easiest tents to assemble by yourself! If you have a newer dome tent, it is simpler than ever to put one together. However, a lost instruction manual can mean the difference between an easy task and a much more difficult one.
The dome tent is the most common type of tent. It is easily distinguishable by its design. It comes with two poles, crisscrossed at a point forming two semi-circles running across the tent body. This is what gives the tent its dome shape.
a tent that has a rounded top: It`s a straightforward dome tent which is quick and easy to erect. The price of the safari includes camping in dome tents. Compare.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Square tent with 2 types gazebo poles, varenda, 2 side windows
ANSWER : The 2 longest of the poles go in an x over the center of the tent and the 2 shorter ones go arch to the sides. http://www.wenzelco.com/details.aspx?NavID=412shows a picture very similar to your tent. If you go to image 2 it shows it with out the fly. now if you got 2 sets of 4 poles, 2 long and 2 short, and one set is all aluminum, then I would go with the aluminum set. It is less likely to collapse in high winds.

Read Full Q/A … : Sport & Outdoor – Others

I need new poles for Swiss Gear tent # SG33071F
ANSWER : Go to Home depot and buy a tube that fit the pole. Cut it into 5 or 6 inches for the broken areas. It costs me less than 2 dollars. Let me know how it turn out on yours.

Read Full Q/A … : Sport & Outdoor – Others

Swiss Gear Tent – Broken Poles SG33071F
ANSWER : Take a look on amazon for replacement. here: Amazon com tent poles. I hope this was helpful. Cheers

Read Full Q/A … : Sport & Outdoor – Others

How to stabalize four tent poles in an open area.
ANSWER : If you get four sturdy poles (not normal tent poles) then the best thing to do is to stake the four poles into the ground at a 60 degree angle with the top away from the tent and then use the tension created by the angle to support the tarp.

Read Full Q/A … : Sport & Outdoor – Others

I have stripped the thread in an extendable tent pole.
ANSWER : If you go to any good tool store or engineering store you can get what is known as helecoil insert.just tell them the inside diam of the pole.they will probably put it in for you if yuo take the pole along.hope this will help.regards barry.

Read Full Q/A … : Sport & Outdoor – Others

How do I fix a tear on my tent’s floor?
ANSWER : The repair kit is for the tent not the floor to repair the floor just ues gaffa tape inside and out sidewaterproofing soak the tent with fabisol waterproofer and let dry

Read Full Q/A … : Sport & Outdoor – Others

Instruction for setup of American Camper tent 8×11
ANSWER : Finally figured it out through trial and error. This right here is the only correct explanation given anywhere on the net.

First, make sure you have all of your poles. There will be 4 straight green ones, 4 straight blue, 4 straight burgundy with plastic feet, 4 curved yellow, 2 small orange arches, a straight pink and a straight white.

Before you start putting the poles together, stake the tent down at every loop point around the base of the tent. There should be 10 of them. Make sure they’re fairly tight and the floor of the tent is taught and flat but not so tight that you tear the tent at the seam. Stake 1 corner first. Then put the second stake through the second loop in order and using a firm pressure, pull away from the first stake, along the line of the tent base, make taught and push the second stake into the ground. Repeat until finished.

The first pole assembly uses in this order, going out from the yellow arch, which is in the center. From one side of that arch, add one green, then a curved yellow, then another green and a burgundy at the bottom. Do the same from the other side of the center arch piece.

This arch outlines the door and goes through the 3 loops on the front of the tent, around the door, so the poles hold the tent up. the loops at the bottom are not for the poles. Every loop around the bottom are where the stakes go to hold it down. For now point the feet towards the back of the tent wherever they will stand on their own. You can fine tune it and firm it up once you get the second arch in place.

All green ones should now be used up.

For the second arch, do the same thing but use the blue instead of the green. So from the one side of the yellow arch, 1 blue, 1 curved yellow, one blue and one burgundy. Same order from the other side of the arch.

Now all the poles should be used up except for the straight pink one and the straight white one. These two go together to make a straight pole that goes through the metal loops attached to the yellow arch pieces and locks the two arch assemblies apart at the top.

Now this takes some maneuvering and some word smithery to describe but what you want to do is make sure the feet of the front arch assembly, are pointed towards the back of the tent and stop at the side. The back arch feet will point towards the front of the tent. They both stop about 6 inches BEFORE the center tie down loop on the SIDES of the tent, on either side of the center loop. The front arch will actually lean forward, with the feet pointed behind it and wedged into the ground, right up against the tent at the bottom, move it around until you have a nice firm feel to it. Same with the back arch but this one will lean away from the back of the tent and the feet pointed towards the front. Once you get the back arch into place, it will really firm up and won’t budge.

Another way to describe it would be that the two arch assemblies feet will point towards each other at the side of the tent, about 6 inches before they reach the center loop on either side.

Hope this helped. =)
Posted on Jul 04, 2015

Read Full Q/A … : Sport & Outdoor – Others