Sport & Outdoor – Others

Experienced athletes share their insights in answering this question:
Points
are scored by hitting anywhere on your opponents body above the waist with any
part of the blade.

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

To score in saber, a fencer has to touch the opponent using the tip or side of their saber. The valid scoring area in saber is any part of the body above the waist, including the mask, arms, and back.
The sabre is a cutting and thrusting weapon with a maximum weight of 500 grams. The entire blade can score with the target area the upper half of the body, covered by the lamé, including the face mask and neck bib which must also be made of conducting material.
The sabre weapon is for thrusting and cutting with both the cutting edge and the back of the blade (unlike other modern fencing weapons, the épée and foil, where the methods of making a hit are scored using only the point of the blade).
Basically these machines connect to the fencers via wires that wrap around a real system that keeps the wires from tripping the fencers, and when a fencer scores a valid hit an electronic signal is sent down the wire to a box that interprets the signal and lights up a series of lights and buzzers that tell which of the …
The uncovered end of the weapon`s blade is known as the point.
The point in line position is a specific position in which the fencer`s sword arm is kept straight and the point of his weapon continually threatens his opponent`s valid target.
There are three weapons used in fencing: épée, foil, or saber.
If two fencers hit and both lights go on, the fencer whose certain, uninterrupted and continuous action was the last one before the final hit, wins the priority. In sabre it means this fencer will be awarded the point.
While saber is the quickest, most aggressive style of fencing, epee is the most defensive, requiring high skills to stop an opponent attempting to score a point.
A fencer may instinctively shout if they score a touch or win a bout. Like all sportspeople, they will celebrate their hard-earned wins and so shouting or screaming when winning a point or overall bout is no surprise.
Fencers wear white uniforms because, in the pre-electric days of the sport, touches were determined by an ink spot left on the uniform by the weapon. Cheating was possible by soaking a uniform in vinegar, so that when a weapon hit the vinegar-treated material, the ink was dissolved and no mark was left behind.
To prevent the blade from breaking or causing harm to an opponent, the blade is made to bend upon impact with its target.
Modern fencing is about scoring points with the tip of a very flexible, relatively light blade. The tip is not sharp at all which makes fencing very safe. The fencer`s body is fully covered with several layers of equipment made from Kevlar, which is the material used to make bulletproof jackets.
A line contains an infinite number of points.
The correct option is A Infinite.
Fencing blades (foil, epee and sabre) are NOT sharp. Fencers wear a protective mask, as well as a heavy fabric or Kevlar jacket and pants (called “knickers”) that prevent the possibility of a broken blade causing injury.
It is 44 inches (110 cm) long with a 35-inch (89 cm) blade and weighs roughly 2.5 pounds (1.1 kg).
Fencing can be traced back to ancient civilizations, where it was used for both self-defense and combat. The first evidence of swordsmanship appears in Egypt, around 3,000 years ago. The Egyptians used swords for both dueling and war, and developed a number of different techniques for fighting with them.
Fencing is a combat sport that features sword fighting. The three disciplines of modern fencing are the foil, the épée, and the sabre (also saber); each discipline uses a different kind of blade, which shares the same name, and employs its own rules. Most competitive fencers specialize in one discipline.
The épée (English: /ˈɛpeɪ/ or /ˈeɪpeɪ/, French pronunciation: ​[epe]), sometimes spelled epee in English, is the largest and heaviest of the three weapons used in the sport of fencing.
Jumping straight up is no longer legal unless you parry, then it`s legal. The argument was that it was target displacement, but it`s somehow still legal to duck. Displacement of target is explicitly legal. That`s one of the tricks on the ref exam.
The three styles that you will have are foil, epee, and sabra. The forms are all going to have a difference in weapon used, techniques to learn, and rules to follow. Most of the time when you are first starting our, the foil form is what is taught. It is known to be easier to learn in the beginning.
Conversely, the weakest part of the blade—the part between the middle and the point—is called the foible.
Fencers who train consistently and compete often will earn their ratings in due time. Your goal should be to be a better fencer, not to chase a rating. If you keep fencing and competing, you will place in a tournament that gets you your first rating, and then the next one, and the next one.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

When I’m using a sabre where should I point to hit?
ANSWER : When using a
sabre the target covers everything above the waist, except the hands and the
back of the head. Any contact between any part of the blade and any part of the
target counts as a valid touch.

Read Full Q/A … : Sport & Outdoor – Others

I bought the Knoxx adjustable stock for my mossberg 500. The forend that comes with it is realy nice and Ide like to use it, but the end nut will not reach the threads. Do i need to buy a new adapter nut that is longer to secure my forend ? I saw one for sale by houge but wasnt sure if that would work on the knoxx forend ?? I realy like the forend sent by knoxx, would be a shame not to use it. What a waste to give that nice piece away and not give the adapter to use it ?? Thanks Noel
ANSWER : That forearm is designed for the 7 5/8″ slide action tube. I’m guessing yours is the 6 1/2″ slide action tube. Take the forearm off your tube and measure it with a ruler. From the very back edge of the action bar collar….that round part the bars are pinned to….all the way to the front edge of the threads. If yours is a 6 1/2″, the Hogue adapter won’t work. You’ll need to buy a new slide action tube. That Hogue adapter is meant to let you use the Hogue rubber coated forearm on your standard sized tube….the Hogue rubber forearm is a hair longer than the standard tube. It won’t give you the length to make up the entire shorter tube length. If you’re handy with a dremel, you could go adapter plus a bit of careful cutting but I won’t suggest you do it if you aren’t certain of your skills.

Read Full Q/A … : Sport & Outdoor – Others

Hiya I have a fujifilm e-900 I have used the camera less than 20 times. The last time I used it I had no problems at all. I had left it sitting in it’s case for 6 months. Now when I try and us it I get the hand with lightning bolt on the lcd. Which I assume means the battery encasement is open. It isn’t open. The camera turns on no problem then when I try and use any function it shuts down. How do I fix this?
ANSWER : The hand with the lightning bolt icon usually means the camera is telling you that there is not enough light and you need to pop the flash up before you take a picture.
If you haven’t used the camera for a while have you tried fresh batteries or charged the 2 re chargeable AA’s that came with the camera?

Read Full Q/A … : Sport & Outdoor – Others

I have purchased three 750-watt power inverters in the last three weeks. They have all failed to work on the second or third use. The first two were the same brand. I replaced an old one that ran for several years. I am using it to run a 4.7 amp 120-volt vacuum cleaner motor that pumps up my air dock. I have it connected directly with marine cable to one of the boat batteries. The battery outputs about 12.8 volts DC. The fuses don?t blow, just No Output. I am using a three-wire 120-volt extension cord and am, wired neutral, hot and ground to the AC motor vial an on/off switch. The motor works fine when I run house power with an extension cord from the dock next to me. Could I be, just unlucky with new inverters and need to buy a forth one?
ANSWER : The problem may be that the inverter is undersized for the load. Is the 4.7 Amp rating the motor peak draw or the nominal one. What I mean is that it takes many times more power to start start the motor than when the motor is running. Typically it is 3 to 7 times more amps to start the motor than when it is running. It could be that starting the vacumm cleaner is stressing the inverter and it is causing it to fail prematurely. If you can find out the locked rotor current draw of the motor, the that would be the mininum size of the inverter.

Also, the type of inverter will make a difference on how the motor operates. A modified sine wave will make the motor run hotter than a pure sine wave inverter. Hope this helps.

Read Full Q/A … : Sport & Outdoor – Others

I have the Intex Sand/Pump pool filter Model SF 20110. It’s been running real great for the last 4 months. However recently it has been tripping the internal overloads and I have found the pump motor to be very hot when I put my hand against it. I have tried several different solutions, such as a level ground platform that was clear of any obstructions, made sure that the motor vents under the motor was clear of anything that would prevent air flow. I used a non electrical type of lubricate on the impeller. When I would turn on the pump the rotor would not turn but only would hum very loudly and then slowly begin to turn. I also noticed that the motor’s rotor shaft would not turn to freely due the tightness around the rotor’s shaft. After using the lubricate the shaft would turn a little easier. I used an amp meter on the incoming voltage line and the motor would run at 4.5 amp. And yet it still overheated and tripped the motor overloads. I can only think that the motor is still not getting enough ventilation. I have check and cleared all the incoming lines and found nothing block the pumps input or output lines. Any suggestion?
ANSWER : I just looking into this issue my self. The pump cools itself by a internal fan, which is run by the motor. Well I took the housing cover off to find out all the fan blades have broken off and were setting in the base of the pump. Once you remove the fan blades from covering the air intake, it might be fine. I will find out my self once summer gets here.

Read Full Q/A … : Sport & Outdoor – Others

I need some kind of fence with at least 1 gate. I have vinyl fencing on both sides in the back yard, but it’s only privacy fencing to separate the yards. I have 2 small dogs and I can’t let them out i
ANSWER : You could probably continue the vinyl fencing but that will cost a lot. You could always use a chain link fence which is really cheap and easy to install but it won’t look right.

Read Full Q/A … : Sport & Outdoor – Others

I have a Scuba Pro X650a regulator. After having the unit serviced this winter I used it last month for the first time in St. Croix.

The first day of diving went fine. However, as the week progressed I noticed that when taking in a breath the regulator continued to trickle air at a very small rate. While not enough to be concerned about safety at this point it has become an annoyance both from the fact that bubbles continue to trickle past my ears and air usage has increased. This is an intermittent problem.

I had it looked at by 2 certified Scuba Pro Dive shops and they could not find anything wrong with it though one did lower the first stage pressure just to a bit to see if that would work. I also cycled the control lever position for “dive” and “surface” intervals to ensure that there were no sticking problems.

It does appear that the problem is intermittent and that it only occurs when the regulator is under water.

In addition is there a diagram in which I can use to troubleshoot this problem?

NOTE: this version of the X650 was not on the recall list of Scuba Pro.

Any help would be appreciated.

Stephen

ANSWER : Strangely enough I had the exact same problem with mine.. I’m in the caribbean I love diving and spear gun fishing.. I had one of these a year ago with the same issue I actually wound up increasing the pressure to get it to work.. It wasnt muc use cause my air ran out at a faster rate. Was never able to fix ,, A buddy of mine had the same issue ,, wound up replacing the swivle vale and this helped for a week and then back to the same old .. I then changed to the Aqualung Mikron Regulator had no issues and it works great .. Quite frankly I think we had bad ones here but I’m not sure where you got yours. If you wish you can replace the swivle valve (most likely cause) but I’ll just change the unit and get another..

Read Full Q/A … : Sport & Outdoor – Others