Coleman

Experienced athletes share their insights in answering this question:
You need to unscrew the top nut that holds the steel top piece on and then it will all come apart

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

The fabric of a hard mantle is supported by a metal frame that gives it a dome-like shape. In use, fuel is burned inside the mantle—the heating of the latter causes the thorium to emit an incandescent glow. The type of fuel depends on the type of lantern/lamp, it might be liquid or gas.
The mantles are a ceramic mesh that encase the flame produced by the lantern. Typical mantles look like this: Mantles start out as silk fabric sacks impregnated with different oxides. The standard for decades has been the Welsbach mantle, which uses a mixture of thorium oxide, cerium oxide and magnesium oxide.
Beyond replacing damaged mantles, American Gas Lamp Works recommends that you replace your mantles at least once per year. Changing your mantles annually will ensure that your lamp remains bright and fuel-efficient.
Article Talk. An incandescent gas mantle, gas mantle or Welsbach mantle is a device for generating incandescent bright white light when heated by a flame. The name refers to its original heat source in gas lights which illuminated the streets of Europe and North America in the late 19th century.
Completely submerge the parts you want to clean and allow them to soak for an hour or more. Rinse in warm water after soaking and brush them well with a brass or very stiff brush. Review the results and repeat as necessary. Finish the cleaning with a light oil, Vaseline or WD-40 and 0000 steel wool.
Pour in 1/4 of a tank or so of “HEET” (brand) or other alcohol based automotive fuel line cleaner. DO NOT use drug store alcohol because it contains water. Swirl the HEET around inside your stove/lantern and let it sit for 20 minutes, then empty the cleaner from your stove/lantern.
Gas mantles are roughly pear-shaped and glow with a bright white light when heated by a gas flame, yielding a soft, romantic light that stays on even when your electric power goes out.
Things You`ll Need

The mantle is usually made from artificial silk or rayon fabric. The fabric is completely soaked with an earth oxide. Thorium is an example of a rare earth oxide that can be used to saturate the fabric. The mantle is then placed inside of the lantern.

English mantle and mantel both derive from the Latin word for “cloak,” mantellum, which was adopted into Old English in the form mentel. The word eventually evolved to mantle under the influence of Anglo-French mantel—a derivative of the Latin term that was borrowed into early Middle English.
The stuffing box is an annular space around the stem where packing rings are inserted for stem sealing. The stuffing box may contain one or more lantern rings, which are hollow rings placed between packing rings for different purposes, such as cooling the packing rings by separating them.
To turn the gas cylinders on (to open gas cylinder valve), turn the valve handwheel anti-clockwise 2 or 3 turns (do not open hard against the stop). To turn off LPG gas cylinder, turn the round valve handwheel located on top of the cylinder clockwise until snug by hand only (don`t over-tighten).
Cut the pipe from the side: To remove the pipe from the gas stove or regulator`s side, you should slightly cut it quickly. From where you are trying to remove the tube, make a small straight cut and pull the gas pipe with your hands. This will, without any effort, remove the gas pipe immediately.
The date code is stamped on the underside of the lantern. A Coleman logo sticker is affixed to the front of the lantern base.
ANSWER: Burning any fossil fuel indoors is potentially dangerous. Coleman lanterns burn fossil fuel and if used indoors create the potential for a fatal buildup of carbon monoxide. For this reason, Coleman strongly urges consumers to use its lanterns only outdoors.
About Open Flame Gas Lamps

Imagine a soft candle burning inside a gas lamp fixture. Rather than providing a solid, steady light, the primary purpose of open flame burners is to provide dramatic ambiance to entrances, walkways, gardens, and entertainment spaces.

Our Verdict. The Coleman Northstar is a lantern`s lantern. It is a propane-fueled, car camping behemoth that is very, very bright. In fact, it receives the highest score for brightness of all the products we tested.
Product details. Take the Coleman Carabineer Classic Personal Size Water-Resistant 400 Lumens LED Lantern, Red anywhere you need extra light. This lantern shines 400 lumens up to 12 meters on its high setting.
Storing one with fuel in it is often times a good idea. Use caution in where you store it, and don`t leave it pressurized. When you put it away for just-in-case storage, de-pressurize and snug down the filler cap just enough to keep the fuel inside should it get knocked over.
Find the pump handle and turn it to the left a turn or two.

With your thumb over the hole in the pump handle, give it 30-40 full strokes. This will build up air pressure inside the tank (fount). After pumping is complete, turn the valve to the right until it closes all the way.

Most Coleman® lamps and lanterns manufactured in the United States after 1925 or so have a manufacturing date stamped on them, and it is usually on the bottom or the side of the fount.
The technology is simple; a piston-operated hand pump pressurises air, which forces liquid fuel – usually kerosene – from a chamber at the lamp`s base into a gas chamber, which is then piped under pressure to a finely woven mantle made from cotton or asbestos. Lit when saturated, an intense incandescence is created.
There are holes at the bottom of a lantern so that oxygen passes through them with the help of convection currents and helps in burning.
The mantles are produced by dipping a meshed fabric (e.g., nylon web) into a solution of thorium nitrate. Other metals are added to the solution for a variety of reasons. For example, cerium is added to increase the light output, while beryllium increases the mantle`s strength.
The mantles are a ceramic mesh that encase the flame produced by the lantern.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Coleman lanterns as collectibles
ANSWER : Coleman Collectors Guide 1903-1954.Tucker & EbebdorfISBN 0-9651407-0-9This is an excellent reference with lots of pictures etc., it does not give the prices, however.You can check Ebay for completed prices if you need an idea of value.I have not found a book yet with accurate values on Coleman lanterns.

Read Full Q/A … : Coleman

I have had two small Coleman ‘Frontier PZ’ propane lanterns for a number of years with no problems. Last year one of them started shutting down for no apparent reason – it would light normally, burn for 4 – 5 minutes and then go out. This summer the second lantern has started doing the same thing. Changing gas cylinders seems to have no effect, nor does a new mantle fix the problem. It’s hard to be certain but as I can’t hear any gas hissing it’s as if the jet gets blocked after a few minutes alight. Turn off the gas, leave the lantern alone for a while and it will relight ok, though it will still only burn for a few minutes before going out again. Any ideas?
ANSWER : There is something in the jets or the piping to the mantels, you my find spider webing there, if you did no cap the port where the tank goes some small friends might have wanted to go camping with you.

Read Full Q/A … : Coleman

How do you open the housing to change the lamp on a Coleman lantern
ANSWER : You need to unscrew the top nut that holds the steel top piece on and then it will all come apart

Read Full Q/A … : Coleman

1985 40 hp Johnson outboard wouldnt open up and
ANSWER : Sounds like your mix is off and it’s fowling the plugs. probably too rich. make sure the level in your carb bowls isn’t too high. Really sounds like you should clean and bench set your carbs. Especially if a plug change helps but doesn’t last, then it’s got to be your fuel mix, or maybe timing.

Read Full Q/A … : Coleman

Intex pool not compatible with Polaris vac-sweep cleaner
ANSWER : Polaris should have an adapter to make it fit, I’m surprised you didn’t get one, usually an adapter is put in a box to make it work with multiple pools, you can call them and order one or go to a local hardware store or Menards and make your own. They will have PVC fitting adapters. You should be able to find one that will work which you may need to permanently attach it on the one end and custom fit it, but if you have basic skills, then you shouldn’t have a problem with getting it to work. Let me know how this turns out.Benjamin

Read Full Q/A … : Coleman

Coleman 425 2-burner white gas stove pops out flame on low heat
ANSWER : There is water in your fuel. Drain the tank and flush it out with denatured alcohol. Refill with fresh fuel.

Read Full Q/A … : Coleman

Coleman rechargable lantern Model 5327A750. Have not used it in a while have left it on charge for over 24 hours. the night light works but the main light does not go on. Replaced the bulb and still nothing. Time for the trash can. Made in china….
It is only one (1) year old!!!!! Coleman has gone downhill@!!!
ANSWER : Just read the charging instructions. Charge for 16-18 hours. If stored for more than 6 months recharge for the full 16 hours. Do not leave the lantern on after the battery has stopped, has overdischarging the battery can cause problems in recharging to a full charge. If this does happen, switch lantern to off and recharge for 40 hours.YES 40 hours. Only the LED is the only light to be used while charging. If you hane the other light on hi or low the battery does not charge.Hope this helps

Read Full Q/A … : Coleman