Have a flashing bi in right corner – Omron Hj 720ITC Advanced Pocket Pedometer

Press and hold the reset button on the left side of the unit under the display. Depressions longer than 1.5 seconds will delete all information about the current session, including steps taken, time walked, distance traveled and calories burned.

The point is that you cannot reset it. Instead write your program to have a count of the pre-existing steps which you subtract form the reading, and make your button update the pre-existing steps count to the current steps count so that the difference is zero.

A simple way to calibrate the device, that is to determine if it is accurately counting all the steps, is by walking and counting. Simply walk for some time and manually count the number of steps you take, and compare this to the number that is displayed on the pedometer.

OMRON machines should be calibrated at least once per year and/or at the start/end of a study if deemed necessary. Allow plenty of time for calibration, this is completed out of house by OMRON and takes approximately 5-7 working days.

The Battery Is Dead

As the battery runs down, you may see flaky readings—counting too few or too many steps. If you have been using the pedometer for a few months without a problem, this may cause newly inaccurate readings. If it is a new pedometer, try changing the battery to see if that corrects the problem.

The Heartbeat Symbol ( ) flashes when the blood pressure reading stored in the memory is above 135 for the Systolic Blood Pressure value and/or above 85 for the Diastolic Blood Pressure value.

How do I know if my pedometer is accurate? Set your pedometer to 0, and then walk and count off 100 steps to determine if your pedometer is accurate. Remember that it`s accurate if the error is within 10% of your count (90-110 steps if you walk 100 steps).

OMRON machines should be calibrated at least once per year and/or at the start/end of a study if deemed necessary. Allow plenty of time for calibration, this is completed out of house by OMRON and takes approximately 5-7 working days.

OMRON HEM-7361T measures and detects blood pressure and AFIB at the same time. Dual Check for Dual Users allows users to have a comprehensive check for their risk of stroke with one device, in one sitting.

What is Normal Blood Pressure: 120 over 80 and under. A blood pressure of less than 120mmHG for the systolic and less than 80mmHG for the diastolic is considered normal blood pressure.