Sport & Outdoor – Others

Experienced athletes share their insights in answering this question:
I had this problem too all, it means its jammed all you have too do is in jam it with the rod thing and then fire a few shots and hopefully that will work

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

Check the magazine to make sure it is fully seated. Check for any potential jams and clear them with the unjamming rod that came with the airsoft gun. Make sure that the BBs are loaded in the magazine correctly. Turn the hop up down or completely off.
If your gun does nothing when you pull the trigger, even on a full charge, you may have blown the fuse to your gun. It could be that: The gears were jammed and the gun is trying to send too much energy to free up the gun. The wiring tangled with the motor pinion causing a short circuit.
This is a fairly common problem with AK-variant guns. The problem is typically either the selector switch (lever) is loose and needs to be tightened or the selector gear is not properly engaging the gearbox and selector plate. Try tightening your selector switch.
Push down the top of the hop-up arm (or turn up the dial) and look in the back of the barrel. You should see the top of the bucking press down into the barrel space. If you can`t see it press in, then you`ve either got it installed incorrectly, or the little nub is missing altogether.
Features. BB GUN KIT: A BB air gun kit for adults and kids. Includes one BB gun, one pack of ammo (250 steel BB pistols), and one gel target for easy and fun shooting. NO CO2 NEEDED: Enjoy tons of shooting fun with the high powered 1911 BB Pistol Kit from Bear River.
A BB gun is a type of air gun designed to shoot metallic spherical projectiles called BBs (not to be confused with similar-looking bearing balls), which are approximately the same size as BB-size lead birdshot used on shotguns (0.180 in or 4.6 mm in diameter).
Assuming the gun is in good working condition, dry firing an airsoft gun shouldn`t be a concern to you.
You can safely leave most batteries in your airsoft gun provided that you look after them and do not leave them entirely empty for an extended timeframe (typically no more than a couple of weeks).
For pistols, it is much more normal to see the 150 to 200 FPS range. While for assault rifles, ones below an FPS of 250 are generally not effective. A good FPS for an assault rifle would be anywhere from 300 to 400 FPS. Anything beyond 500 FPS is generally disallowed in most airsoft events due to safety concerns.
Most airsoft guns on the market are usually below 350 ft/s (110 m/s), but projectiles expelled from any type of airsoft gun can travel as slow as 65 ft/s (20 m/s) to more than 700 ft/s (210 m/s) and are capable of breaking skin at 350–400 ft/s (110–120 m/s).
These guns work by releasing a burst of gas from a pressurized container. As the gas is released, it looks to expand and this pushes the BB out of the barrel. Most of the noise you hear from a gas powered gun is just the sound of the compressed gas leaving the barrel.
An airsoft fuse is the first, and probably most effective, piece of protection standing between your AEG and electrical damage. The fuse is part of your gearbox`s overall circuit. An AEG fuse stops too much current flowing around your circuitry should a power surge occur by `breaking`, or halting.
Dry firing PCP or CO2 air rifles will usually be completely safe, as there isn`t a piston to worry about. You`re simply releasing a short spurt of air/CO2 to force the pellet up the barrel.
Airsoft BBs are made from a material that will break down in water or on land. The best part is that they have no adverse effect on the environment during decomposition.
Certainly! In fact, a target gun will be dry-fired up to five times as much as it will be fired with live ammo. The shooter needs constant practice with the trigger, sight picture and grips to improve his scores, so all credible 10-meter airguns have a dry-fire feature for training. But a lot of other guns do, too.
BB guns can fire at speeds of up to 550 feet per second. Pellet guns can be even more powerful with speeds approaching 1,000 feet per second.
The bb itself is . 177 diameter brass or copper coated steel pellet, so it`s moving out on average between 200 fps (feet per second), on up to about 300 fps, for the more powerful multi pump models. That`s enough to really harm someone.
For most shooters, a trigger pull weight between two and three pounds is just about right. Trigger pulls for hunting rifles for use in cold conditions or against dangerous game should be at least three pounds.
Trigger Pull Weight for a Handgun

> As a general rule, a serious use pistol should have a trigger no lighter than 4 pounds and ideally no more than 6 pounds.

Is it safe? So is an Airsoft replica safe for your 13 year old? Yes, an Airsoft replica is safe and is not a BB gun. Airsoft is safe for teenagers as long as they`ve been taught about handling and safety.
Airsoft is very safe for kids as long as they are well educated about weapon use and its dangers. An Airsoft event is one of the safest, controlled environments available for both kids and adults to shoot each other. Kids can learn much more than just shooting guns by playing Airsoft.
Cold doesn`t just affect the gas used in your airsoft guns, but affects the actual airsoft guns themselves. Metal shrinks in the cold, tightening up tolerances and causing more friction. Liquids become more viscous, meaning lubricants aren`t as effective and provide more resistance. Plastics become brittle and fragile.
Shots Per Battery

If you are using a 1,400 mAH battery, for example, you can expect to fire about 1,400 rounds before your battery goes dead. That may sound like quite a lot, but keep in mind that many airsoft battles often last several hours.

Playing Airsoft in the rain won`t hurt or damage your Airsoft replica. Overall Airsoft replica`s are pretty water resistant, however they are not waterproof. For electric and gas powered Airsoft replica`s it`s pretty much the same.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

I got a sig 552 airsoft gun but it dosent fire it screeches
ANSWER : I have a sig 552 as well and had similar problems but if you take it apart the trigger box will come out and you just need to mess with that a little bit

Read Full Q/A … : Sport & Outdoor – Others

Got a m901c the bbs are not coming out when i fire
ANSWER : I had this problem too all, it means its jammed all you have too do is in jam it with the rod thing and then fire a few shots and hopefully that will work

Read Full Q/A … : Sport & Outdoor – Others

Loud noise when furnace starts but furnace won’t come on.
ANSWER : Your fan delay relay has failed and must be replaced.

Read Full Q/A … : Sport & Outdoor – Others

Humminbird fishfinder 525 will not come on. It is getting power to the base other than that will not come on. Before it did that it showed loading and could not get it to turn off so i had to unplug it now it will not come on what can i do
ANSWER : Hello!I do beleive the issue with your sounder is the internal power circuit.The job can be completed for abour $50 at either the Humminbird factory or one of the service centers in Canada.Where to ship your items:(if you live in the U.S.)HumminbirdAttn: Service Dept.678 Humminbird LaneEufaula, AL 36027Who to call:Toll-free: 1-800-633-1468Monday – Friday8:00am – 4:30pm CST
Authorized Service Centers – Canada Bay Distributors119 Progress Ct.P O Box 70North Bay, Ontario, Canada P1B 8G8Tel: (705) 476-6010Email: [email protected]’s Reel Repair#108-31060 Peardonville Rd Abbotsford, BC V2T 6K5Tel: (604)855-1119 Email: [email protected] PTG Electronics Ltd.3092 Portage Ave Winnipeg, MB R3K 0Y2Tel: (204)831-0862Fax: (204-888-6207 Email: [email protected]

Read Full Q/A … : Sport & Outdoor – Others

Stopped firing. Battery and fuse are fine.
ANSWER : The part that feed the bbs most be broken. or your mag is broken. dose its work in other modes?

Read Full Q/A … : Sport & Outdoor – Others

My tippman custom pro is shooting all over the place. When i fire it will shoot 5 feet to the left then to the right then two at the same time
ANSWER : May need to check that your barrel is NOT loose, check it out and if loose get it tight;)

Read Full Q/A … : Sport & Outdoor – Others

Hello, i think i figured out what it was, after breaking down the valve again i was looking at the rubber that is around the valves and i was thinking at first this wasnt an extra part, but come to find out after many hours of researching online it is an peice that comes off but its just glued on, its a (Spider) gasket. So do u think if nothing is wrong with the valve itself that if the spider gasket is wearing away and starting to get britle that it will let the debris i vacuum up come back in the pool and let the backwash valve leak when its on the filter position? I cant thank u enough for helping me. You sure have lead me in the right direction and saved me alot of money. Otherwise i would of probably gave up and bought another one….thanks and let me know if u think that the buying a spider gasket will solve my problems
ANSWER : The spider gasket that you refer to is what seals the chambers from each other. Leaking here can have a large impact on how well the valve is able to do its job. But, I don’t remember seeing one in the parts diagram. If you are able to obtain one, then by all means, replace it if you can. As I said earlier, you are essentially rebuilding the valve assembly. If something looks worn, now is the time to repair / replace it during reassembly. I also have a suggestion for you as well. Take good pictures, document everything that you do when you disassemble and reassemble the valve. Then write up a tip (gotta become an expert) for others to read through and be able to service their own equipment. I was surprised to see that there were as many other questions asked about the same filter that you have. Highly recommend that you do this. As many times as you have taken this apart and put it back together, you are fast becoming an authority on it!Glad to see that you are sticking it through, and not throwing in the towel. After all is said and done, you will have a working knowledge of how your filter works, and be able to identify issues in the future before they become a problem. Congratulations!

Read Full Q/A … : Sport & Outdoor – Others