Sport & Outdoor – Others

How do you erect a hartford xl tent
Experienced athletes share their insights in answering this question:
Start with the two longest poles and feed them through (every pole is colour coded so you can’t go wrong), that will give you the main shape. peg each corner, once done start with back door section and feed the shorter ones through the loops when done peg it down. then do the same with the other two sleeping sections. finally the front door section (the black/grey coded pole) the pole has a curve which positions in the middle,get that pegged down and put the guide ropes in and it tight. then you can fine tune the rest of the tent sections, once you have everything how you want it, then put guide ropes in. it takes 15/20mins with two people to get everything up, after that it takes 15/20mins for one person to fine tune. hope this helps, if this is your first time putting up the hartford xl it’ll take you about 1hr 15mins cause it did me. but it gets quicker with practice.

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

verb. If people erect something such as a building, bridge, or barrier, they build it or create it.
A tent peg (or tent stake) is a spike, usually with a hook or hole on the top end, typically made from wood, metal, plastic, or composite material, pushed or driven into the ground for holding a tent to the ground, either directly by attaching to the tent`s material, or by connecting to ropes attached to the tent.
pitch a/the tent.
For most tents you should start at one end then progress to the other, pegging each side as you go. The level of tension should be equal all round, and tight enough to prevent flapping, without placing too much strain on the structure & material.
(ɪrekt ) verb. If people erect something such as a building, bridge, or barrier, they build it or create it.
Erect means “build” or “upright.” If you erect a house, you build it. If you stand erect, you hold your body as tall as possible.
In fact, most people who try it PREFER floorless tents in wet ground to a floored tent. With a floorless tent you can simply walk in with muddy boots and not worry about tracking mud or water inside. With a conventional floored tent once muck and water get inside it is trapped and very difficult to remove.
Whatever option you choose, always use a ground cover under your tent. This will help keep moisture from seeping through your tent, getting your gear wet, and will protect the life of your tent. Abrasive ground will wear out the floor of any tent no matter how durable it is, so ground cover or tarp protects the tent.
A canvas platform tent is also commonly called a deck tent or off the ground tent. Off the ground tents are primarily used when it is going to be used in a permanent location. A canvas platform tent and a deck tent are generally the same type of tent commonly used for Glamping resorts.
A tented roof (also known as a pavilion roof) is a type of polygonal hipped roof with steeply pitched slopes rising to a peak.
Most tents have a fly made from some nylon-based material, usually a coated nylon taffeta. And when it gets damp (which it does even with the coating), nylon stretches.
Properly staking a tent prevents it from getting blown about in windy conditions, and staking the rain fly out away from the tent`s body helps to keep water out. Learning to stake a tent correctly is an essential skill to have if you plan on going camping a lot.
In summary, the structures above are responsible for the three types of erection: psychogenic, reflexogenic and nocturnal.
(ɪrekt ) verb. If people erect something such as a building, bridge, or barrier, they build it or create it.
An erect image, in optics, is one that appears right-side up. An erect image is formed when both of the rays intersect each other`s a certain point then an erect image is formed It is an image in which directions are the same as those in the object, in contrast to an inverted image.
A groundsheet is critical for staying dry. If you don`t use one, and it rains even a bit, you will most likely wake up wet and profoundly unhappy. However, a solid tent plus a groundsheet can keep you dry in light rains or even moderate drizzles.
However, even for some experienced campers, we remain unaware that tents are not fully waterproof! Feeling the material, we might think that tents can repel water completely, but contrary to popular belief, tents are only water-resistant.
Touching the interior of the tent

This is because when one touches the inner walls, the water droplets that gather lose their surface tension which causes them to seep through the tent fabric. Whether intentional or not, this can easily cause a leakage.

By touching the tent, you are creating a point for the water to wick to, thus causing a leak. Modern nylon tents do not have this problem, since they have rain flys.
The best material for a tent footprint is a tarp. It should be a heavy-duty one that`s waterproof. Other fabrics you can use are polyester and nylon, although nylon is not waterproof. Plastic sheeting works well, too.
Your tent platform can be virtually any size. Aim for a foot of platform off each side of the tent, with extra room in the front for a porch. For our purposes, we`ll be building a platform for the 12`x14` Alpha Wall Tent, so the dimensions will be 14` wide (horizontal) by 18` deep (vertical).
A tent on a deck can be a great addition to an event at your home! It can act as that extra room you need, and since it`s typically connected to your house, you don`t even need to go far! You could use the space as a beverage area, lounge area or a way to show off a great view your guest wouldn`t normally get to see.
Eberhard Koebel, a leader in the German Youth Movement, developed the kohte with friends on the model of Sami tents, wanting to reproduce their characteristic central roof hole, which made a fire inside the tent possible for winter camping. He gave it the name kohte based on the Swedish term for Sami tents, kåta.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Square tent with 2 types gazebo poles, varenda, 2 side windows
ANSWER : The 2 longest of the poles go in an x over the center of the tent and the 2 shorter ones go arch to the sides. http://www.wenzelco.com/details.aspx?NavID=412shows a picture very similar to your tent. If you go to image 2 it shows it with out the fly. now if you got 2 sets of 4 poles, 2 long and 2 short, and one set is all aluminum, then I would go with the aluminum set. It is less likely to collapse in high winds.

Read Full Q/A … : Sport & Outdoor – Others

How to stabalize four tent poles in an open area.
ANSWER : If you get four sturdy poles (not normal tent poles) then the best thing to do is to stake the four poles into the ground at a 60 degree angle with the top away from the tent and then use the tension created by the angle to support the tarp.

Read Full Q/A … : Sport & Outdoor – Others

I need new poles for Swiss Gear tent # SG33071F
ANSWER : Go to Home depot and buy a tube that fit the pole. Cut it into 5 or 6 inches for the broken areas. It costs me less than 2 dollars. Let me know how it turn out on yours.

Read Full Q/A … : Sport & Outdoor – Others

Swiss Gear Tent – Broken Poles SG33071F
ANSWER : Take a look on amazon for replacement. here: Amazon com tent poles. I hope this was helpful. Cheers

Read Full Q/A … : Sport & Outdoor – Others

Tent I bought a tent the name on the outside says South Mountain.Not sure how to put up. It has two long rods & two short ones it looks like there are two rain gaurds also. There are no instrutions that came with this tent. Are there any pics that that show how to put up. I think the tent is around five years old.
ANSWER : It has to be similar to this (see link below). Most tents assemble in similar ways. Insert rods through the sleeves. Hook one side of the rod to one corner, arch the rods and hook the other side of the rod to the opposite corner. Repeat for the other rod.

http://www.coleman.com/coleman/images/pdf/2000000136.PDF

Read Full Q/A … : Sport & Outdoor – Others

I have stripped the thread in an extendable tent pole.
ANSWER : If you go to any good tool store or engineering store you can get what is known as helecoil insert.just tell them the inside diam of the pole.they will probably put it in for you if yuo take the pole along.hope this will help.regards barry.

Read Full Q/A … : Sport & Outdoor – Others

How do I fix a tear on my tent’s floor?
ANSWER : The repair kit is for the tent not the floor to repair the floor just ues gaffa tape inside and out sidewaterproofing soak the tent with fabisol waterproofer and let dry

Read Full Q/A … : Sport & Outdoor – Others