How to Identify and Resolve Common Issues ?
We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :
Error Code: E1
If the running belt moves for several minutes and then produces the E1 error, this is most commonly a result of the running belt needing lubrication. The motor control board will shut down due to the motor pulling too much current, triggering a safety shut down.
E1 Error: Treadmill calibration did not receive a signal for greater than 10 seconds. Resolution: Check to ensure that the cables connecting the console and controller are secure. If any of the cables/connectors appear loose, completely power off and unplug the treadmill before unplugging and reattaching the cables.
The E-2 error code relates to a communication error between the computer and the resistance motor. In most cases, this is caused by the cable that plugs into the back of the computer not being properly inserted into its connection point or by a bent pin on that connection.
If the E1 error occurs after the belt starts to move for several seconds, the error code means that the system is not picking up the speed of the motor. This pickup comes from a magnet mounted on the front roller pulley and a speed sensor, or a problem with the magnet.
E1 in the display means the test strip may be damaged or not properly inserted. Remove and reinsert the test strip, or replace it if damaged.
The E1 error code is an AUTO-STOP PROTECTION indicating a short or open circuit in the indoor pipe sensor. Try unplugging the unit and waiting 2 minutes for the power to discharge. Then plug the unit back in.
How can I get SSS E1 form? If you`re already an SSS member and you want to get a copy of your E1 form, you can request for it online through the SSS member portal; no need to visit their office to request your personal record. After a few months, you will receive a digital copy of your original SSS E1 form via email.
If an E1 error code shows up in your air handler, that means there is a communication error either with the indoor unit or the outdoor unit. The causes for this could be a wiring mistake, or a faulty control board with the indoor unit or the outdoor unit.
Error 20 indicates that at a speed of 1 mile per hour or less an excessive amount of power is being demanded from the motor controller for an excessive period of time. 1. The treadmill user (especially a heavier user) is standing on the drive belt as they start the running belt into motion.
E01 Leg Malfunction 1. Leg(s) are loose from the control box. Check cable connection, ensure legs are connected correctly.
E01 Low battery voltage shutdown is imminent depending on the setting Check battery status and recharge if necessary. Check for proper DC cable sizing. Check for loose connections and tighten if necessary.
E, 1, 6 (LED display)
The ink has run out. Replace the ink cartridge and close the paper output cover.
2022. When the Washing Machine is displaying E1 in the panel, it is indicating an error in the water supply. The appliance is not detecting that the unit is filling with water. To resolve, checking the following: • Check whether the water supply is turned on and that there is adequate water pressure.
The F1 E1 alert indicates there is an issue with the appliance control unit or associated wiring. Unplug the washer, wait two minutes, then plug back in.
CODE: E1. RESULT: Indoor and outdoor unit communication malfunction. CODE: E3. RESULT: Indoor fan speed malfunction.
The Integrated Management Module (IMM) will check every request to set the value with the read back value when the command completes. This “e1” error code means that the IMM set the value internally and read back a different value after setting the new value on the system board.
F7 E1 Code in display:
This code indicates a motor speed sensing error, the motor can not achieve the correct speed for the cycle selection.
Email, fax, or share your sss e1 form 2015-2023 form via URL. You can also download, print, or export forms to your preferred cloud storage service.
If an E1 error code shows up in your air handler, that means there is a communication error either with the indoor unit or the outdoor unit. The causes for this could be a wiring mistake, or a faulty control board with the indoor unit or the outdoor unit.
An E1 error indicates that the closed position of the valve has not been detected. To resolve this, please unmount the Smart Radiator Thermostat and make sure that the mounting bracket is properly tightened to the valve body. Restart and remount the Smart Radiator Thermostat to restart calibration.
E1-
Electrical components Try to pull the rubber handle on the handlebar slightly out from the throttle lever, often this error code is due to the rubber grip and the throttle lever being too close. After this you can check that the on and off button in the display works properly.
E1-
Electrical components Try to pull the rubber handle on the handlebar slightly out from the throttle lever, often this error code is due to the rubber grip and the throttle lever being too close. After this you can check that the on and off button in the display works properly.
Vibelife 7117 Error message E1, blowing fuses.
Will not start at first, just gives E1 error message. Leave it paused for a while, then it will start but blows 15A fuse straight away. Have disconnected the drive belt from the motor to the drive roller and fuse still blows with no load on motor.
ANSWER : There is no solution to this problem. Its a Vibelife brand – that’s the Problem! Vibelife is like any number of Chinese, Taiwanese build clones, they are ordered in a batch of several thousand by some dodgy importer and once that batch is sold on ebay or ozauction, its close up shop, order another batch with a different faceplate on the control console and away they go again. In short you’ve got buckleys chance of fixing it so my advice is:
a. Chuck it and get another one of those el’ cheapo treadmills. After all they generally last about a 18 months under normal use and you can afford to buy four of those before you match the price of a professional home use machine.
b. Kind of like above only buy the professional home use machine for about $2600 and make sure is has a 3yr warranty on the motor and control boards. They should last you at least 5 years under normal home use.
c. As for a. but forget buying a treadmill, Invest in gym membership. For about the same price as an el’ cheapo treadmill you could have a year’s membership, all the treadmills you can use and a whole heap of other machinery as well, not to mention the excercise classes you could go to for fun, socialising and general fitness.
