Another number is ANSI/AGAZ21.11.2
Sport & Outdoor – Others

Experienced athletes share their insights in answering this question:
[email protected] my emil accawnd

How to Identify and Resolve Common Issues ?

We offer a diverse range of insights on identifying and resolving common problems in sports. Our sources encompass academic articles, blog posts, and personal essays shared by seasoned athletes. :

These logs can be placed in many different types of fireplace spaces. The pipes pump invisible gas through holes in the logs. When the gas logs are ignited, the ceramic logs will produce a steady flame. As propane or natural gas is pumped through the pipes, it burns harmlessly on the surface of the ceramic logs.
Refractory ceramic gas logs tend to last a little bit longer than cement logs due to their high heat rating, and won`t fade with long-term use as quickly as the cement ones. Consider replacing cement logs after about 2-3 years of frequent use. Ceramic logs can usually go 3-5 years before being replaced.
Q: How long do gas logs last? A: In the average home, a well-maintained vented log set with ceramic logs will last 10 or more years. A well-maintained vent-free log set with ceramic logs can also last a long time, but, if heavily used, will begin to wear in 3-5 years.
While all gas logs are made to withstand high heat, ceramic refractory gas logs are much more durable than ceramic fiber. Because of the higher quality of the material in ceramic refractory logs, they do tend to be more expensive.
When shopping for gas logs, you`ll need to choose vented or vent-free logs. This decision comes down to many factors, including looks versus efficiency, local building codes and fireplace placement. With vented gas logs, you`ll enjoy a large, realistic-looking flame that operates with an open chimney flue or damper.
Most are made from a ceramic or a refractory cement (cement made from brick) mixture. They`re fire resistant and are designed to last for years. They can also be installed in traditional wood-burning fireplaces.
While firelogs shouldn`t expire, you should take care of them, so they`ll burn as expected. Most manufacturers recommend storing logs in a dry area, away from dampness or heat.
Fire log is designed to offer robust flames that last approximately 3 hours and lights in under 5 minutes for added convenience.
Ventless logs do in fact produce an unmistakable odor, some more so than others depending on the quality of the brand. There is no way of preventing this, it is simply the nature of burning gas in your home without exhausting the fumes up a chimney.
The most common causes of soot buildup in a gas fireplace are ceramic fire-logs that have been moved out of their proper position and burner ports that are clogged. If your firelogs have moved, then this can interfere with the path of the flames that work to ensure the clean burning of the gas.
With ceramic fiber logs, it`s best to use a dry cleaning method that prevents water from seeping into the porous surface. Take your ceramic fiber logs outside and gently brush away soot, dust, and debris with a stiff horsehair or ceramic bristle brush, paying extra attention to any nooks and crannies.
The most economical way to purchase kiln dried wood is by buying it in bulk from a local supplier. This is also the most sustainable option for reducing the distance to have the logs delivered.
To enhance the realism of your gas fireplace, you could invest in an electric crackler, which mimics the sounds of a wood-burning fire. Scent burners are also available that can fill your home with the aroma of a wood fire.
Gas logs for your fireplace are the safest, most cost-effective way to ensure that you and company can enjoy gathering around a fire. Their ceramic fiber materials make them able to withstand thousands of direct flame degrees without emitting any toxic fumes.
They can withstand the high temperatures of a fire pit, but unfortunately, they become discolored over time, which makes them look less realistic. Both types of ceramic logs don`t produce a lot of heat, so if warmth is what you seek, steel logs are the way to go.
Artificial firelogs are basically big candles. Most are made from postindustrial sawdust, cellulose, and waxes. Because they`re made from recycled materials, firelogs have been promoted as being more environmentally friendly than regular wood logs, and as producing less emissions, including carbon monoxide.
Trees like pines, firs, or cypress have “soft” wood, which burns fast, leaves few coals, and makes a lot of smoke that can coat your chimney with soot (not a safe thing in the long run).
Plywood and chipboard are materials often used in construction or furniture creation. However, they are not suitable to be used as fuel in your wood-burning stove. They are typically glued together using synthetic resins, which can release harmful chemicals into the atmosphere when burned.
Ventless logs do in fact produce an unmistakable odor, some more so than others depending on the quality of the brand. There is no way of preventing this, it is simply the nature of burning gas in your home without exhausting the fumes up a chimney.
Use a damp rag or lint-free cloth to wipe off the soot, carbon, and dust from the logs, at least once per year. Be careful to avoid scratching the logs, or they will no longer be useable. Liquid gas log cleaners are also available at your local fireplace dealer and may make it easier to clean.
Ceramic logs are highly durable and can withstand extreme heat. Cement logs tend to retain color, and the detailed “real logs” look more so than ceramic ones, but either works great and can supply years of joy in front of your fireplace.
Gas fireplaces are not designed to support the heat that is generated by burning wood. The location or orientation of ceramic logs or coals can become compromised by real burning wood, creating a safety issue.
The most common causes of soot buildup in a gas fireplace are ceramic fire-logs that have been moved out of their proper position and burner ports that are clogged. If your firelogs have moved, then this can interfere with the path of the flames that work to ensure the clean burning of the gas.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Help! Just bought a Remington 30 06 for my grandson that has a Bushnell Sportview U4124 4-12power scope mounted on it. I would like to sight it in at 100 yards using a 180 grain shell but I don’t have the owners manual and I don’t understand an on line explanation that I found. This is the on line message: “You’ll see two horizontal crosshairs, put the top one on the animals back then zoom in until the bottom one is on his stomach. Look at the numbers on the zoom dial there should be three lines they are D – deer, E – elk and A – antelope. The numbers are the distance to the game, you then turn the external elevation knob or turret to the matching distance and shoot dead on. No need to hold over for bullet drop. The sad part will be if you didn’t get the other turrets that would have come with it as they are calibrated to different calibers and bullet weights”
I don’t understand how to set the elevation knob to 100yards when its lowest shown number is 150. If I need other turrets how or where can I get them? Thanks, a frustrated grandfather.
ANSWER : You can contact the Remington directly who will ship you a free users manual. Here is the company’s Contact Us details:


You may also find the required answer in the official help center. It covers almost every fields. Here is the link:


Read Full Q/A … : Sport & Outdoor – Others

I have a York Stellar model mid efficiency furnace Model # P?UCD12N07601A, Serial # EXAM3600524 installed in 1992. The HSI was replaced approximately 3 months ago. Over the last two weeks the ventor motor comes on, the HSI lights but does not ignite the gas. The ventor motor runns continously and the HSI continues to turn off and on without gas ignition. Some times by turning the ventor motor off and on (by opening and closing the bottom furnace faces panel door) will give be ignition after the HSI goes through 1-4 cycles. If I can’t get it to work I call my furnace repair guy. The serviceman thought it was the pressure switch and ordered one. Just this last weekend I had no heat and another service guy came in replaced the HSI again and adjusted the pressure switch and said this fix should work. Less than a day later furnace still experiencing the same problem-Ventor motor comes on, HSI comes on but no gas ignition. ventor motor runs continuously and the temperature in the house drops! I’m frustrated and the servicemen don’t seem to know how to fix the problem for good.
ANSWER : Make sure the vent pipes that exhaust the fumes are not blocked in any way and also check the drain line to be sure it is not kinked from the vent motor to the trap. Take the hoses off the vent motor and the pressure switch and make sure all the hoses are clean and free from debris also check the trap on the drain hose and make sure it has water in it if it doesn’t this will creat a negative pressure in the vent motor housing not allowing the vent pressure switch to make.

Read Full Q/A … : Sport & Outdoor – Others

I need a owners manual for 1994 coleman pioneer cheepasake popup
ANSWER : Http://www.colemantrailers.com/download-owners-manuals

Read Full Q/A … : Sport & Outdoor – Others

I need to replace a gas valve for a furnace its a york stellar 133,000 btus the old valve number is 36E36-304 but is discontinued i need the new valve that replaces the old one and the price the model of the furnace is P3UCD20N10601A AND THE SERIAL NUMBER IS EBBM032176,can you show me a picture of the valve to compair it with my old valve
ANSWER : You will probably have to go with a “generic” gas valve. Try contacting Grainger to see if they can cross reference a workable solution.

Read Full Q/A … : Sport & Outdoor – Others

Need owners manual for Shakespeare E-Z cast reel
ANSWER : You can find it here

Read Full Q/A … : Sport & Outdoor – Others

Need the wire diagram to rewire my Ariens lawnmover to bypass the safety switch. It is Ariens GT-19 model # 931026 Serial # 001463.
Can you help? It is an old Ariens mower but still runs good but now I need to bypass the safety switch in order to run it any longer. The local Ariens dealer said I need to go through the internet and get the wire diagram as they cannot give it to me directly. They told me I needed the wire diagram and the part involved in bypassing the safety switch. Hope this is all the information you need to help me.

Thank you. Roger Fielitz

ANSWER : Here is owner manual:http://apache.ariens.com/manuals/030305C.pdfusually the switch is behind the ignition, sometimes at the N position of gearshift, just look for a switch with one wire coming in & one going out (usually the same color); disconnect the two wires & jumper them together to bypass the switch. Looks like yours has one under the seat.

Read Full Q/A … : Sport & Outdoor – Others

I have a vintage model winchester 24 12 gauge SxS
ANSWER : I spent that past 20min or so runnin through the normal places I normally find Owners manuals for older guns with no luck.The only place i was able to find one is on ebay. Gun Broker.com is also another place they are sellin them.Here is a LINK to the ebay Auction.

Read Full Q/A … : Sport & Outdoor – Others